Infiniti FX45 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(32)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(32)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Infiniti FX45 Power Steering Pressure Hose Replacement is $564 with $340 for parts and $224 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Infiniti FX45V8-4.5LService typePower Steering Pressure Hose ReplacementEstimate$940.74Shop/Dealer Price$1124.01 - $1651.12
2006 Infiniti FX45V8-4.5LService typePower Steering Pressure Hose ReplacementEstimate$914.14Shop/Dealer Price$1089.42 - $1603.69
2003 Infiniti FX45V8-4.5LService typePower Steering Pressure Hose ReplacementEstimate$926.32Shop/Dealer Price$1104.71 - $1628.17
2008 Infiniti FX45V8-4.5LService typePower Steering Pressure Hose ReplacementEstimate$914.14Shop/Dealer Price$1089.49 - $1603.81
2005 Infiniti FX45V8-4.5LService typePower Steering Pressure Hose ReplacementEstimate$914.14Shop/Dealer Price$1093.61 - $1611.03
2007 Infiniti FX45V8-4.5LService typePower Steering Pressure Hose ReplacementEstimate$914.14Shop/Dealer Price$1089.88 - $1604.50
Show example Infiniti FX45 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(32)

Rating Summary
31
1
0
0
0
31
1
0
0
0

Edgar

26 years of experience
41 reviews
Edgar
26 years of experience
Infiniti FX45 V8-4.5L - 60,000 Miles Maintenance Service - Palo Alto, California
Edgar came to my home to perform a 60k mile service on my Infiniti FX45. He gave me a call to let me know he was on his way and arrived promptly. He was very friendly in his demeanor and professional in communicating what checks he was doing and reporting on the condition of the car. He brought all the equipment he needed in his mobile shop and completed the service in the estimated time. I highly recommend Edgar if you have any mechanic needs!

Leland

14 years of experience
9 reviews
Leland
14 years of experience
Infiniti FX45 V8-4.5L - Crankshaft Position Sensor - Canton, Georgia
He was exactly what you would hope for. On time. Professional. Thorough. Friendly.

Nicholas

22 years of experience
354 reviews
Nicholas
22 years of experience
Infiniti FX45 V8-4.5L - Pre-purchase Car Inspection - Englewood, Colorado
Nick was great. He saved me a major headache because I was able to get a pre sale inspection and it was worth every penny. Nick was detailed and provided a great insight into potential issues and explained everything. I will only use Nick going forward m

Clarissa

28 years of experience
251 reviews
Clarissa
28 years of experience
Infiniti FX45 V8-4.5L - Camshaft Position Sensor - Philadelphia, Pennsylvania
I will used her again

Excellent Rating

(32)

Rating Summary
31
1
0
0
0
31
1
0
0
0
Number of Infiniti FX45 services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
1000+
experts on our platform

Recent articles & questions

Ridesharing Vs. Renting a Car
Business trip or vacation, transportation is necessary. Should you choose rideshare services or rent a car?
How Long Does an Air Pump Belt Last?
Most Most newer vehicles come with two air injections systems. The primary system delivers air through the air filter, and then to the intake, where it mixes with fuel in order to create combustion. The secondary system employs a pump...
Veteran and Military Driver Laws and Benefits in Louisiana
The The state of Louisiana offers a number of benefits and perks for those Americans who have either served in an Armed Forces branch in the past, or are current active military members. Disabled veteran registration and driver license fee...

Steering wheel not working

There could be many reasons for why your steering wheel is no longer working in your 1991 GMC. The many reasons include issues with the steering column itself, the steering gear box, a failing arm or link that assists the...

Car making grinding noise

There is a good chance that what you heard was the transmission. Transmissions are very complex systems. It is very likely that the transmission will need to be overhauled or even replaced, depending on what part of the transmission has...

Screeching when I start the car cold. But the sound goes away.

When you have a squealing noise on start up, that goes away after a few minutes, is normally a belt issue. This is typically a sign that the belt is slipping enough that it makes the noise until everything gets...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com