Hyundai Tiburon Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(164)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(164)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Hyundai Tiburon Power Steering Pressure Hose Replacement is $353 with $213 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Hyundai TiburonV6-2.7LService typePower Steering Pressure Hose ReplacementEstimate$613.82Shop/Dealer Price$732.13 - $1078.94
1997 Hyundai TiburonL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$938.35Shop/Dealer Price$1127.87 - $1691.08
2007 Hyundai TiburonL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$633.61Shop/Dealer Price$757.37 - $1124.48
2006 Hyundai TiburonV6-2.7LService typePower Steering Pressure Hose ReplacementEstimate$604.81Shop/Dealer Price$721.37 - $1066.88
2004 Hyundai TiburonL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$633.61Shop/Dealer Price$758.85 - $1127.06
2000 Hyundai TiburonL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$616.71Shop/Dealer Price$726.03 - $1048.17
1998 Hyundai TiburonL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$938.35Shop/Dealer Price$1127.92 - $1691.17
1997 Hyundai TiburonL4-1.8LService typePower Steering Pressure Hose ReplacementEstimate$938.35Shop/Dealer Price$1127.90 - $1691.13
Show example Hyundai Tiburon Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(164)

Rating Summary
157
3
0
1
3
157
3
0
1
3

Lee

20 years of experience
10 reviews
Lee
20 years of experience
Tiburon 2008 - Alternator Belt - South Amboy, NJ
Lee is a great mechanic with a lot of experience who clearly knows what he is doing. I would recommend him to anyone who needs a mechanic.

Andrian

30 years of experience
184 reviews
Andrian
30 years of experience
Tiburon 2008 - Serpentine/Drive Belt - Hollywood, FL
Adrian was extremely professional and courteous. He took care of everything quickly and was a pleasure to work with

Eliud

20 years of experience
148 reviews
Eliud
20 years of experience
Tiburon 1998 - Fuel Filter - Snellville, GA
Very good mechanic would recommend him

Rusty

0 years of experience
532 reviews
Rusty
0 years of experience
Tiburon 2008 - AC Compressor - Arlington, TX
He is always great !

Excellent Rating

(164)

Rating Summary
157
3
0
1
3
157
3
0
1
3
Number of Hyundai Tiburon services completed
1804+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Get Mud Off Car Carpet
It’s It’s expected that the floor mats in your car are going to get dirty, especially if you have animals or kids. If you have floor mats in your car that are carpeted instead of rubber or vinyl, they can...
P0220 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch Circuit "B" Malfunction
P0220 P0220 trouble code definition Throttle/pedal position sensor/switch circuit B malfunction. What the P0220 code means The P0220 code means that the vehicle’s powertrain control module has detected a voltage or resistance reading that is outside of specifications that were...
How to Buy a Personalized License Plate in Maryland
Maryland Maryland offers a variety of different styles of personalized license plates (https://www.yourmechanic.com/article/how-to-find-out-which-license-plates-are-available-in-your-state-by-brady-klopfer) (also known as vanity plates), from personalized car tags to plates that are affiliated with organizations such as universities/colleges, nonprofits, and charities. If you are eligible for...

What should I know about driving on hills?

While there is no replacement for awareness when driving, there are a couple things you can do when you’re about to go up a hill: Shift to a low gear and stay at a slow speed while going up the...

What does the antilock brake system (ABS) Warning Light mean in a 2012 Chevrolet Equinox?

The antilock brake system (ABS) Warning Light is located on your instrument control panel. This alert illuminates when there is a problem with your ABS system, which is a key component in your brake system. However, sometimes the ABS Warning...

Interior door handle not working

Hi there. Your door handle is connected to a linkage which will disengage the door latch letting you out of the vehicle. If your vehicle's linkage inside of the door panel is broken it will not disengage the locking mechanism....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com