Hyundai Kona Fuel Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Fuel Pump Replacement Service

How much does a Fuel Pump Replacement cost?

On average, the cost for a Hyundai Kona Fuel Pump Replacement is $581 with $441 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Hyundai KonaL4-1.6L TurboService typeFuel Pump ReplacementEstimate$1037.22Shop/Dealer Price$1261.38 - $1925.74
2018 Hyundai KonaL4-2.0LService typeFuel Pump ReplacementEstimate$1028.21Shop/Dealer Price$1250.60 - $1913.64
Show example Hyundai Kona Fuel Pump Replacement prices

What is the fuel pump and how does it work?

The fuel pump supplies pressurized gasoline to each of the fuel injectors in a car’s engine. The fuel pump is powered by a compact electric motor and is located in the vehicle’s gas tank. The pressure and output of the pump are controlled by a regulator. Filtration of the fuel occurs either in the fuel tank using a pickup screen or externally with a replaceable filter mounted in the fuel supply line.

When to consider replacing the fuel pump?

A high quality, OEM fuel pump can last indefinitely. However, as with any electro-mechanical component, a fuel pump will eventually degrade and fail. If it fails to produce adequate pressure or completely quits operating, it will need to be replaced. This failed condition can sometimes be preceded or accompanied by one or more of the following symptoms:

  • Car won’t start or unexpectedly stalls and won’t re-start. A failed fuel pump may prevent a car from starting or stall it.
  • Check engine light is on. Sometimes a fuel pump will fail slowly, and that means the fuel pressure and volume slowly degrades. The lack of fuel may result in the engine operating without enough fuel relative to the amount of air, causing the check engine light to appear.
  • Whirring noise from fuel tank. As a fuel pump fails, you may notice a whirring or humming noise coming from the fuel tank area, toward the rear of the car. If the noise is from the fuel pump, failure of the pump is often imminent and you should replace the fuel pump at your earliest convenience.

How do mechanics replace the fuel pump?

  • The fuel pump is tested to be sure it isn’t functioning.
  • Should the fuel pump be faulty, it is removed from the tank through an access panel above the tank in the passenger compartment.
  • When no access panel exists, fuel is first drained from the tank and then the fuel tank must be lowered from the vehicle to gain access to the pump.
  • In all cases, fuel pump supply and return hoses, as well as EVAP system hoses, and electrical connections to the pump must be removed.
  • Once the pump is out, any reusable brackets and pick up screens are attached to the new pump, then the new pump is installed.
  • If the fuel system uses an in-line external filter, a filter is often replaced. All hoses and electrical connections are re-established.
  • Fuel is added to the tank and the engine is run to test for leaks.

Is it safe to drive with a fuel pump problem?

Usually, it’s still safe to drive, but the pump may lead to an overheated engine and catalytic converter. Complete fuel pump failure can leave you stranded out on the road, but many times a car won’t start before initially driving.

However, if the fuel pump problem involves leaks of gasoline or vapors, it is unsafe to continue driving, and should immediately be checked by a qualified mechanic.

When replacing the fuel pump keep in mind:

  • Prior to replacing, the mechanic will power the fuel pump directly to confirm that the issue is a failed pump versus a faulty power supply to the pump.
  • Unless the fuel filter was replaced recently, whenever the fuel pump is replaced a new fuel filter should be installed.
  • When failing earlier than expected, the power supply should be verified because a voltage drop in the fuel pump circuit can lead to overheating.
  • Should the fuel tank be lowered during the repair, the fuel tank straps and fasteners should be checked for excessive corrosion and replaced as needed.
  • The fuel in the gas tank cools and lubricates the fuel pump. After installation of a new fuel pump, it’s wise to keep the gas tank at least a quarter full to maximize the life of a new fuel pump.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Octavio

13 years of experience
77 reviews
Octavio
13 years of experience
Hyundai Kona L4-2.0L - Turo Host Inspection - Orlando, Florida
Absolutely nice guy! On time and ready to go.

Andrew

16 years of experience
657 reviews
Andrew
16 years of experience
Hyundai Kona L4-1.6L Turbo - Battery - Hillsboro, Oregon
Arrived early, took care of everything in less than thirty minutes, super friendly from start to finish. Thank you!

Richard

12 years of experience
450 reviews
Richard
12 years of experience
Hyundai Kona L4-2.0L - Oil Change - Humble, Texas
2nd Time with Richard, always professional and thorough.

Clarissa

28 years of experience
251 reviews
Clarissa
28 years of experience
Hyundai Kona L4-2.0L - Car Battery Replacement - Warrington, Pennsylvania
Very Kind and expert

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Hyundai Kona services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

P2016 OBD-II Trouble Code: Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1
P2016 P2016 code definition Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1 What the P2016 code means P2016 is an OBD-II generic code for the Engine Control Module (ECM) detecting a low voltage failure in the intake manifold runner...
Windshield Laws in Utah
Drivers Drivers in Utah are required to follow the traffic laws in order to keep themselves and others safe on the roadways. However, in addition to rules of the road, motorists are also required to make sure their vehicles meet...
How to Register a Car in Idaho
Register your car at the Idaho DMV within 90 days. The cost is $14-$62. Provide proof of car insurance, personal identification, and a VIN inspection.

What do the turn signal indicators mean?

The turn signal indicators are located on your instrument panel. When one of the turn signal indicators is flashing, it means the corresponding turn signal is currently on. If both turn signals are flashing simultaneously, it means that your hazard...

is it the waterpump going out or gone out

Hi Linda. Thanks for contacting us tonight. Typically, water leaking from the water pump location is an indication of damaged inner seals, which means the pump is damaged. It's recommended to replace the water pump when this happens.

I have a 1997 Ford Ranger. It runs fine until I shift to 3 rd gear then its starts to stall out and i have to limp it home. It has a new fuelp pump assembly and fuel filter. At a loss right because there are no CELs. Any idea waht my issue could be or where to start looking?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com