Hyundai Entourage Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(58)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(58)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Hyundai Entourage Power Steering Pressure Hose Replacement is $322 with $182 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Hyundai EntourageV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$518.52Shop/Dealer Price$613.00 - $888.34
2009 Hyundai EntourageV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$703.05Shop/Dealer Price$844.15 - $1263.32
2007 Hyundai EntourageV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$509.51Shop/Dealer Price$602.25 - $876.28
2010 Hyundai EntourageV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$703.05Shop/Dealer Price$844.17 - $1263.36
Show example Hyundai Entourage Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(58)

Rating Summary
53
2
0
1
2
53
2
0
1
2

David

8 years of experience
6 reviews
David
8 years of experience
Hyundai Entourage V6-3.8L - Brake Light Switch - Fort Mill, South Carolina
did great job getting off a difficult part and replacing it

Keith

19 years of experience
406 reviews
Keith
19 years of experience
Hyundai Entourage V6-3.8L - Lights (Headlamps/beams/brakes) - Loughman, Florida
Awesome to work with. Appreciated his knowledge and friendliness. Will have him back again.

David

11 years of experience
193 reviews
David
11 years of experience
Hyundai Entourage V6-3.8L - Car is not starting - Philadelphia, Pennsylvania
Very friendly and helpfu, and very reliablel! Helped me figure out why my car is not starting!! Ive used him twice and each time got the job done. He will be the only person I use to work on my car

Michael

5 years of experience
355 reviews
Michael
5 years of experience
Hyundai Entourage V6-3.8L - Alternator - Greenfield, Indiana
Michael was on time and explained what was going on with my minivan that needed repaired so I could understand.

Excellent Rating

(58)

Rating Summary
53
2
0
1
2
53
2
0
1
2
Number of Hyundai Entourage services completed
638+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

Insurance Requirements for Car Registration in South Dakota
All All drivers in South Dakota are required to prove financial responsibility in order to legally operate and register a vehicle. The most common way that drivers do this is to purchase an insurance policy; however, drivers may also deposit...
How to Change Front Brake Pads
Brake pads are failing when the brakes are noisy, the brake pedal pulsates when pressed, or there is poor brake response when the pedal is pressed.
P0249 OBD-II Trouble Code: Turbocharger Wastegate Solenoid B Low
P0249 P0249 code definition The P0249 code indicates that the PCM is detecting an abnormal reading coming from the turbocharger wastegate solenoid “B” circuit. What the P0249 code means Circuit B is a specific wastegate solenoid wherein multiple solenoids are...

O2 sensor not coming off

I will assume you are trying to remove the sensor yourself. The location of the oxygen sensor beneath the car allows rust to take over much of the exposed metal binding some parts together. It becomes very difficult to remove...

What would cause the battery to drain. car does not start when it's warm.

Hello. There are many things that can cause a battery to drain even when the car is off. If any live wire on the vehicle, there are many, short to ground then they can complete a circuit that will place...

2011 Ford Fusion won't shift gears.

The first thing to check would be the transmission fluid level. If the fluid level is low from a leak, this may cause the transmission to slip and when revved to higher rpm it may jerk when the line pressure...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com