Hyundai Elantra Coupe Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(25)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(25)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Hyundai Elantra Coupe Fuel Injector Replacement is $672 with $532 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Hyundai Elantra CoupeL4-1.8LService typeFuel Injector ReplacementEstimate$1515.88Shop/Dealer Price$1859.70 - $2883.06
2014 Hyundai Elantra CoupeL4-2.0LService typeFuel Injector ReplacementEstimate$1210.93Shop/Dealer Price$1479.00 - $2279.08
Show example Hyundai Elantra Coupe Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(25)

Rating Summary
23
1
0
1
0
23
1
0
1
0

Deward

18 years of experience
156 reviews
Deward
18 years of experience
Hyundai Elantra Coupe L4-2.0L - Car is not starting - Greensboro, North Carolina
Deward was professional and honest. I appreciate him taking the time out to explain things to me bc I am not well versed in cars.

Rodrigo

16 years of experience
133 reviews
Rodrigo
16 years of experience
Hyundai Elantra Coupe L4-1.8L - Valve Cover Gasket - Henderson, Nevada
Thank you Rodrigo, He just serviced my hyundai elantra coupe; this work order included spark plugs and valve cover gasket. I couldn’t be happier. Service was completed in a professional and efficient manner. Rodrigo was polite and courteous. He has just become my mechanic. Awesome

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
Hyundai Elantra Coupe L4-1.8L - Brake Pads Replacement (Front) - Denver, Colorado
Robert was awesome! He changed out my rotors and brake pads in less than an hour and fixed the horrible grinding noise. He was very informative and let me know what he was doing and why each step of the way.

Lucas

11 years of experience
33 reviews
Lucas
11 years of experience
Hyundai Elantra Coupe L4-1.8L - Brake Rotor/Disc Replacement (Rear) - Olney, Maryland
Lucas was great. Super nice, and did a great job with my brakes. He even took a look at my boyfriend's car while he was here.

Excellent Rating

(25)

Rating Summary
23
1
0
1
0
23
1
0
1
0
Number of Hyundai Elantra Coupe services completed
275+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Check Spark Plug Wires
Car engines that have a distributor or remote coil pack have spark plug wires that transfer the spark from the coil to the spark plug.
P2302 OBD-II Trouble Code: Ignition Coil "A" Secondary Circuit
P2302 trouble code code definition P2302 is a general OBD2 diagnostic trouble code indicating a fault within the ignition coil A secondary...
P2703 OBD-II Trouble Code: Transmission Friction Element D Apply Time Range/Performance
P2703 P2703 code definition A P2703 trouble code means that the Powertrain Control Module (PCM) has detected a malfunction in the transmission friction element D application. In addition to the storage of a trouble code and the illumination of the...

Flashing check engine light, service stabilitrak, traction control light, only while idling

Hello. If you are getting a code on cylinder 4, then that means there is an issue with that cylinder. Most of the time, with so few miles, the issue is not related to dirty fuel injectors but is caused...

Steering shakes and makes horrible noise at low speed 2011 GMC Acadia

Hi and thanks for contacting YourMechanic. From what you said and what was displayed on the video your power steering pump (https://www.yourmechanic.com/services/power-steering-pump-replacement) is making the humming noise as if the pump is lacking of oil, but the shaking of vehicle...

No warning lights, no smoke even when under load, turbo working, intercooler ok, injectors cleaned, no power, all filters clean.

Some possibilities are low engine compression, defective throttle position sensor, a timing advance malfunction, fuel pressure problem, vacuum leak, malfunctioning oxygen sensors and so forth. Of course, it's possible that you could have a combination of faults. Please note that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com