Honda S2000 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(39)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(39)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Honda S2000 Wheel Bearings Replacement is $273 with $91 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Honda S2000L4-2.2LService typeWheel Bearings - Driver Side Front ReplacementEstimate$382.62Shop/Dealer Price$432.58 - $571.93
2006 Honda S2000L4-2.2LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$370.91Shop/Dealer Price$418.57 - $556.20
2003 Honda S2000L4-2.0LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$414.70Shop/Dealer Price$462.96 - $601.03
2003 Honda S2000L4-2.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$370.91Shop/Dealer Price$418.60 - $556.25
2003 Honda S2000L4-2.0LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$414.70Shop/Dealer Price$465.31 - $605.15
2000 Honda S2000L4-2.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$370.91Shop/Dealer Price$418.78 - $556.57
2000 Honda S2000L4-2.0LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$414.70Shop/Dealer Price$462.98 - $601.07
2008 Honda S2000L4-2.2LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$370.91Shop/Dealer Price$418.60 - $556.25
Show example Honda S2000 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(39)

Rating Summary
33
2
1
2
1
33
2
1
2
1

Jeffrey

14 years of experience
83 reviews
Jeffrey
14 years of experience
S2000 2005 - Car is not starting - Clearwater, FL
Jeffrey was able to quickly replace a part that put my car back into running condition.

Justin

0 years of experience
105 reviews
Justin
0 years of experience
S2000 2000 - Electric Problems - Rocklin, CA
Very professional expert mechanic

Excellent Rating

(39)

Rating Summary
33
2
1
2
1
33
2
1
2
1
Number of Honda S2000 services completed
429+
services done by our mechanics
TOTAL NUMBER OF EXPERT Honda MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Dodge Durango
The The 2012 Dodge Durango is a more fuel efficient SUV yet still provides all of the room and power you need. The Durango can tow up to 7,400 pounds making it perfect for family outings and carrying lots of...
How to Reduce the Damage to a Flooded Car
Flood damage can greatly impact the function and value of your car. However, there are methods to preserve your car and minimize the amount of damage.
How Long Does a Brake Hose Last?
Vehicle Vehicle braking systems need brake fluid in order to function properly. There are a number of components on your car that help to supply the brake fluid needed when trying to bring a car to a top. The brake...

Electrical components don't work, service ESP system warning on

There should be a problem code associated with the ESP System warning. That will further direct the diagnosis for that problem. Check the fuse (https://www.yourmechanic.com/services/fuse-replacement) and brake light switch (https://www.yourmechanic.com/services/brake-light-switch-replacement) for the tail light issue. The door locking fuse issue...

My car has is leaking coolant and is also smoking from the hood

If you just have an external coolant leak and no overheating the leak will typically be in a hose, radiator, water pump, heater hose and so forth. Unless the leak is large and obvious, external leaks are typically found by...

Car was struck by lightning and won't start

Hello, thank you for writing in. Unfortunately, there is not a cut and dry answer for your problem. Lightning strikes are not created equal, nor is the damage they cause. You most likely have electrical issues, rather than something mechanically...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com