Honda Fit Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(43)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(43)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Honda Fit Brake Pad Replacement is $198 with $58 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Honda FitL4-1.5LService typeBrake Pads - Rear ReplacementEstimate$526.88Shop/Dealer Price$595.33 - $786.10
2016 Honda FitL4-1.5LService typeBrake Pads - Rear ReplacementEstimate$434.70Shop/Dealer Price$480.98 - $612.40
2019 Honda FitL4-1.5LService typeBrake Pads - Front ReplacementEstimate$317.13Shop/Dealer Price$361.77 - $491.52
2018 Honda FitL4-1.5LService typeBrake Pads - Front ReplacementEstimate$317.13Shop/Dealer Price$361.77 - $491.52
2013 Honda FitElectricService typeBrake Pads - Rear ReplacementEstimate$329.63Shop/Dealer Price$368.92 - $477.05
2014 Honda FitL4-1.5LService typeBrake Pads - Rear ReplacementEstimate$379.22Shop/Dealer Price$411.93 - $501.96
2007 Honda FitL4-1.5LService typeBrake Pads - Front ReplacementEstimate$307.11Shop/Dealer Price$349.26 - $471.51
2013 Honda FitL4-1.5LService typeBrake Pads - Rear ReplacementEstimate$361.71Shop/Dealer Price$407.10 - $537.85
Show example Honda Fit Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(43)

Rating Summary
41
1
1
0
0
41
1
1
0
0

Robert

15 years of experience
1061 reviews
Robert
15 years of experience
Fit 2011 - Brake Pads - Wheat Ridge, CO
Robert was great. He communicated the issues to me and he fixed my car so that I can get to work tomorrow. It was amazing to have my car fixed while I was at home!

Alex

4 years of experience
82 reviews
Alex
4 years of experience
Fit 2015 - Brake Pads - Oakland, CA
Alex was extremely knowledgeable, fair and honest. He did excellent work and was very thorough (and patient!) with all my questions. Highly recommend!

Peter

22 years of experience
479 reviews
Peter
22 years of experience
Fit 2015 - Brake Pads - Burbank, CA
From the day I stumbled on this site to time Peter was finished, it's been the best way for me to get my car fixed, Pete was smart, honest, and seemed he liked his profession, he was a trust worthy mech. Hard to find. Professional thru and thru. I can't wait to tell people about this!

Bryan

2 years of experience
6 reviews
Bryan
2 years of experience
Fit 2008 - Brake Light Switch - Fort Lauderdale, FL
Great job Bryan. Prompt, courteous. Thanks.

Excellent Rating

(43)

Rating Summary
41
1
1
0
0
41
1
1
0
0
Number of Honda Fit Brake Pad Replacement services completed
473+
services done by our mechanics
TOTAL NUMBER OF EXPERT Honda MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Parking Brake Release Cable
If the parking brake won't engage or disengage, or the car feels sluggish and dragging, you may need to replace the parking brake release cable.
P0176 OBD-II Trouble Code: Fuel Composition Sensor Circuit
P0176 P0176 code definition? Fuel Composition Sensor Circuit Malfunction What the P0176 code means Trouble code P0176 is triggered by the Engine Control Module (ECM) when it receives an abnormal signal from the flex fuel sensor. The flex fuel sensor...
A Buyer’s Guide to the 2012 Mercedes-Benz CL-Class
Think Think of the 2012 Mercedes-Benz CL-Class as the two-door cousin of the S-Class lineup. Each vehicle in this class is a stylish, sexy coupe. What’s more – they all manage to combine incredible performance with svelte styling. They might...

Advice on which type of gas to use

If you look at your fuel gage, it will say "premium fuel only". The vehicle was designed to only run on this fuel. If you try and run the lower grade fuels, you will run the risk of damaging the...

Jeep has mph and gas gauge broken, has a death wobble, and is stuck on 2nd just want to see how much that would cost me

Hi Ricky. Thanks for contacting us tonight. I've forwarded your question to our sales and service department to see if they can put together an estimate for you. There are several possible reasons why the speedometer and fuel tank isn't...

Car jerk when at 1 RPM while stopping

If the engine RPM doesn't change during this jerk, or "transition", it is more likely that the cause is rough or abrupt downshifting. Engine RPM can be logged using a scan tool and your car may be new enough that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com