GMC Yukon Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(483)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(483)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a GMC Yukon Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2019 GMC YukonV8-6.2LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1996 GMC YukonV8-5.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 GMC YukonV8-6.2LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 GMC YukonV8-5.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2009 GMC YukonV8-5.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2003 GMC YukonV8-6.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1999 GMC YukonV8-5.7LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2002 GMC YukonV8-4.8LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC Yukon Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(483)

Rating Summary
460
11
3
1
8
460
11
3
1
8

Jim

33 years of experience
187 reviews
Jim
33 years of experience
GMC Yukon V8-5.7L - Valve Cover Gasket - Dublin, California
Excellent work as expected.

Jimmy

29 years of experience
186 reviews
Jimmy
29 years of experience
GMC Yukon V8-5.3L - Oil Change - Charlotte, North Carolina
Jimmy was very professional and I will definitely use him again.

Whitney

39 years of experience
783 reviews
Whitney
39 years of experience
GMC Yukon V8-5.3L - Brake System Flush - San Jose, California
Whitney is awesome! He shows up on time and is very friendly and professional. I highly recommend him.

Edmar

22 years of experience
246 reviews
Edmar
22 years of experience
GMC Yukon V8-5.3L - inspection door lock actuator (driver side rear) - Frisco, Texas
Very knowledgeable and professional, knew exactly what to do and no surprises. Thank you Edmar!

Excellent Rating

(483)

Rating Summary
460
11
3
1
8
460
11
3
1
8
Number of GMC Yukon services completed
5313+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Top 10 Scenic Drives in Southern California
Southern California has some of the most diverse landscape and terrain in the world, and this makes it an ideal region to explore by way of a scenic drive. Over the course of an hour, afternoon, or even a weekend,...
Child Seat Safety Laws in Utah
In In the State of Utah, and indeed in all other states, there are laws in place to protect young passengers from death or injury. The laws in every state are founded in common sense, but may vary somewhat from...
What Does the Service Required Warning Light Mean?
The service required warning light reminds you when it's time to perform some maintenance for your car, usually an oil and filter change.

Bad noise coming from transmission.

Depending on whether you have a manual or an automatic transmission will determine what the issue is. Also, a description of the noise would help. Most of the time if you have an issue with the manual transmission that causes...

Car is jerking forward when car is stopped with brake applied.

What you are describing is a real safety concern. You should have your Mustang's brakes checked out right away before you drive it anymore. It sounds like there may also be an idle control issue that is causing RPM's to...

My water pump pulley won't spin, making the serpentine belt squeak & start smoking. Do I replace the water pump or just the pulley?

Hi. Usually there is nothing wrong with the actual pulley when this happens. In most cases, the water pump is binding up, causing the pulley to stop spinning. Replacement of the water pump will fix your problem. The pulley will...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com