GMC Yukon Steering wheel feels loose Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(483)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(483)

Steering wheel feels loose Inspection Service

How much does a Steering wheel feels loose Inspection cost?

On average, the cost for a GMC Yukon Steering wheel feels loose Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 GMC YukonV8-5.3LService typeSteering wheel feels loose InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2010 GMC YukonV8-5.3LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2001 GMC YukonV8-5.3LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2012 GMC YukonV8-6.0L HybridService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2017 GMC YukonV8-5.3LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2010 GMC YukonV8-6.2LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2010 GMC YukonV8-6.0L HybridService typeSteering wheel feels loose InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2005 GMC YukonV8-5.3LService typeSteering wheel feels loose InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC Yukon Steering wheel feels loose Inspection prices

A steering wheel that feels loose or has “play” in it prevents the driver form getting an accurate interpretation of how the wheels are turned. Any steering setup where you can move the wheel more than one to one and a half inches without moving the wheels is too lose and may have an issue. When the steering wheel feels loose it can be difficult from drivers to accurately know the position of the front wheels. This lack of responsiveness can be dangerous for drivers, especially in heavy traffic or winding roads.

How this system works:

The majority of modern vehicles use two different kinds of steering setup to help control the movement of the car. Rack and pinion steering is typically used on cars, small trucks and SUVs, while recirculating-ball steering is used on large SUVs and trucks. The similarities and differences in the two systems begin to manifest themselves when components fail, causing the steering wheel to feel loose.

Common reasons for this to happen:

  • Worn Tie Rods: Tie rods serve as the driver’s connection between the steering unit and the tires. Tie rods are present in both rack and pinion and recirculating ball setups. If tie rod ends become worn, they may cause the steering wheel to feel loose. A vehicle with worn tie rods may also squeak as the steering wheel is turned and be out of alignment.

  • Worn Pitman Arm: A pitman arm is only present in vehicles with recirculating-ball steering. The pitman arm connects a gear attached to the steering wheel to the steering rack itself. When the pitman arm becomes worn or the teeth in the gear connecting the pitman arm begin to slip, it can cause the steering wheel to feel loose.

  • Worn Ball Joint: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. A ball joint that is worn may cause the steering to feel loose and may also create a banging sound, especially when going over bumps.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the loose-feeling steering. The mechanic will then provide a detailed inspection report outlining the reason for the loose steering and the cost of any repairs that need to be made.

How it's done:

When the mechanic arrives, he or she will first lift the vehicle and remove the wheels so that they can better access the suspension and steering components. From here, the mechanic will be able to assess the reason why the steering has become loose.

If the mechanic suspects that worn tie rods may be the issue, he or she will inspect the tie rod for superficial damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

If the mechanic believes that the pitman arm has become worn, he or she will remove the pitman arm from the track bar and replace it with a new pitman arm. The mechanic should ensure that the new part is properly tightened.

If the mechanic suspects worn ball joints, he or she will remove the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

In the case of all repairs the mechanic will make sure that all the new parts have been installed correctly and are properly lubricated. In order to ensure that the steering is working properly, the mechanic may test drive the vehicle to check for excess play.

How important is this service?

A steering wheel that feels loose may not be giving an accurate indication of the front wheel’s position. Loose-feeling steering may also indicate that a problem has occurred with the steering unit or suspension. If you notice that the steering does not seem to be as responsive, you should stop driving the vehicle and have it inspected by a mechanic.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(483)

Rating Summary
460
11
3
1
8
460
11
3
1
8

Derrick

20 years of experience
19 reviews
Derrick
20 years of experience
GMC Yukon V8-5.3L - Steering wheel feels loose Inspection - Norfolk, Virginia
Right on time. Very nice. Went thru everything and explained things. Helpful

Shaun

10 years of experience
542 reviews
Shaun
10 years of experience
GMC Yukon V8-5.3L - Serpentine/Drive Belt - Peoria, Arizona
Awesome! Will use Shaun again

Yoel

9 years of experience
212 reviews
Yoel
9 years of experience
GMC Yukon V8-6.0L - Pitman Arm - Philadelphia, Pennsylvania
Went above and beyond

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
GMC Yukon V8-6.2L - seat adjuster - Laveen, Arizona
He was great arrived early got the job done my wife and I were able to go on our trip as planned thank you Pete.

Excellent Rating

(483)

Rating Summary
460
11
3
1
8
460
11
3
1
8
Number of GMC Yukon services completed
5313+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Insurance Requirements for Car Registration in Michigan
The The state of Michigan requires that all drivers carry no-fault auto insurance, or “financial responsibility,” to help cover the cost of damages and injuries related to an auto accident. The minimum financial responsibility requirements for drivers in Michigan are...
P2159 OBD-II Trouble Code: Vehicle Speed Sensor B Range/Performance
Diagnostic Trouble Code (DTC): P2159 P2159 code definition Vehicle Speed Sensor B Range/Performance Related Trouble Codes: P2158: Vehicle Speed Sensor B P2160:...
P0285 OBD-II Trouble Code: Cylinder 9 Injector Circuit Low
P0285 P0285 code definition The P0285 code is logged when the PCM (Powertrain Control Module) experiences a low voltage situation that involves the number nine (in the firing order) cylinder’s fuel injector. What the P0285 code means The fuel injector...

My 2009 Chevy Aveo LT won't crank over until all the gauge needles jump on to their normal position. What is wrong?

Hi there. There are connectors in the back of the dash gauge cluster in the dashboard. One or all of the harness are loose and causing an issue with the gauges. Remove the dash panel and remove the dash gauge...

What number is the fuse for the reversing lights on a 2008 vectra c

The fuse for the back up lights is number 10 and is a 15amp fuse.

Multiple random cylinder misfires and -33 LTFT.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com