GMC Yukon XL Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(20)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(20)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a GMC Yukon XL Headlight Bulb Replacement is $155 with $15 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 GMC Yukon XLV8-5.3LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$185.60Shop/Dealer Price$196.85 - $222.50
2017 GMC Yukon XLV8-6.2LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$214.20 - $255.40
2015 GMC Yukon XLV8-6.2LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$208.67Shop/Dealer Price$226.20 - $274.60
2015 GMC Yukon XLV8-6.2LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$208.67Shop/Dealer Price$226.20 - $274.60
2016 GMC Yukon XLV8-6.2LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$208.67Shop/Dealer Price$227.67 - $277.18
2016 GMC Yukon XLV8-6.2LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$208.67Shop/Dealer Price$226.34 - $274.85
2018 GMC Yukon XLV8-5.3LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$214.24 - $255.47
2018 GMC Yukon XLV8-6.2LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$214.22 - $255.44
Show example GMC Yukon XL Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(20)

Rating Summary
19
0
0
0
1
19
0
0
0
1

Andrew

12 years of experience
962 reviews
Andrew
12 years of experience
GMC Yukon XL V8-6.2L - Strut Assembly Replacement (Front, Rear) - Kansas City, Missouri
Just as expected, smooth and easy.

Patrick

16 years of experience
406 reviews
Patrick
16 years of experience
GMC Yukon XL V8-5.3L - Brake Pads Replacement (Front) - San Clemente, California
Super fast and very friendly. Nice job, Patrick!!

Noe

37 years of experience
604 reviews
Noe
37 years of experience
GMC Yukon XL V8-5.3L - Oil Change - Auburn, Washington

Chris

17 years of experience
340 reviews
Chris
17 years of experience
GMC Yukon XL V8-6.2L - Tail Light Lens Replacement (Driver Side) - Coronado, California
It was a great experience. Very happy! Thanks Chris.

Excellent Rating

(20)

Rating Summary
19
0
0
0
1
19
0
0
0
1
Number of GMC Yukon XL services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Infiniti FX
There’s There’s just something unmistakable about the overall design and aesthetics of the 2012 Infiniti FX. With sleek lines and a classic feel, some might think this SUV is all about looks. However, it also packs exceptional performance and plenty...
How to Replace a Lost or Stolen Car Title in South Carolina
There There are a few different reasons you may find yourself needing to obtain a duplicate car title in your lifetime. Your car title is what proves you are the registered owner of your vehicle, and is important if you...
The Traveler’s Guide to Driving in Aruba
Aruba Aruba is probably best known for the beautiful weather and the stunning Caribbean beaches that beckon you to sit on the sand and let your worries melt away. However, the island has a number of other wonderful attractions and...

How do I open and close the fuel tank?

The fuel tank is accessed through the fuel door on the left side of your vehicle. To add more fuel, you have to unscrew the fuel cap. The fuel cap unscrews counter-clockwise, just like the lid of a jar. To...

My compressor went out. Will that cause my engine to not operate?

Hello. If you have an engine that is cranking but not starting, then you need to look on dashboard to see if the theft light is flashing first. If it is, then try a different key to see if that...

Hit a speed bump when driving and my car began stalling

When you hit the bump, it could be that the engine shifted enough to pull loose the connection at the Mass Air Flow meter. Look under the hood for a large rubber hose connected to the throttle body and be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com