GMC Sierra 3500 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(37)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(37)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a GMC Sierra 3500 Power Steering Pump Replacement is $399 with $119 for parts and $280 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 GMC Sierra 3500V8-6.6L Turbo DieselService typePower Steering Pump ReplacementEstimate$548.64Shop/Dealer Price$615.50 - $799.88
2006 GMC Sierra 3500V8-6.0LService typePower Steering Pump ReplacementEstimate$530.62Shop/Dealer Price$593.95 - $775.68
2002 GMC Sierra 3500V8-6.6L Turbo DieselService typePower Steering Pump ReplacementEstimate$530.62Shop/Dealer Price$594.00 - $775.77
2005 GMC Sierra 3500V8-6.0LService typePower Steering Pump ReplacementEstimate$530.62Shop/Dealer Price$594.00 - $775.76
2004 GMC Sierra 3500V8-6.0LService typePower Steering Pump ReplacementEstimate$530.62Shop/Dealer Price$596.94 - $780.92
2003 GMC Sierra 3500V8-6.0LService typePower Steering Pump ReplacementEstimate$530.62Shop/Dealer Price$594.28 - $776.25
2001 GMC Sierra 3500V8-8.1LService typePower Steering Pump ReplacementEstimate$530.62Shop/Dealer Price$594.03 - $775.82
2001 GMC Sierra 3500V8-6.0LService typePower Steering Pump ReplacementEstimate$530.62Shop/Dealer Price$594.00 - $775.76
Show example GMC Sierra 3500 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(37)

Rating Summary
35
1
0
1
0
35
1
0
1
0

Robert

43 years of experience
232 reviews
Robert
43 years of experience
GMC Sierra 3500 V8-8.1L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Houston, Texas
Best I have had yet with My Machanic

Peter

29 years of experience
592 reviews
Peter
29 years of experience
GMC Sierra 3500 V8-8.1L - Check Engine Light is on - Sylmar, California
I will definitely be requesting Peter for future work. He was very knowledgeable and explained things thoroughly. Thank you!

Martin

30 years of experience
166 reviews
Martin
30 years of experience
GMC Yukon V8-5.3L - Power Steering Pump - Nashville, Tennessee
Great guy. Great service.

Joseph

18 years of experience
107 reviews
Joseph
18 years of experience
GMC Sierra 2500 HD V8-6.0L - Power Steering Pump - Folly Beach, South Carolina
Joe is a rockstar! Super nice guy and great at what he does! Loved him!!!

Excellent Rating

(37)

Rating Summary
35
1
0
1
0
35
1
0
1
0
Number of GMC Power Steering Pump Replacement services completed
407+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Designing YourMechanic Advice
How How the project came to be When people first visit YourMechanic they mostly fall into two groups: “I know what I need - let’s book the service” or “my car is not working and I have no idea why -...
How to Maintain Automotive Hand Tools
Automotive technicians take good care of automotive hand tools to stay safe and save money. Keep parts clean and in working order to maintain tools.
2012 Honda Civic vs. 2012 Ford Focus: Which One Should I Buy?
One of the best ways to cope with pain at the gas pump is to look at downsizing your vehicle, and today’s compact cars are a great option that allow you to keep the space that you need to move...

Valve cover/gasket replaced car is now shuddering I shop liable

The labor to replace the valve cover gaskets should only be 3.0 hours. The list dealer list price for gaskets are only $50. It sounds like you were charged double of what you should of been charged. You most likely...

What does it mean when Brake light stays on

Your car probably has several brake warning lights on the dashboard. I'll presume that you are talking about the one that comes on when the parking brake is set. If that light stays on it may mean there is a...

Hey so my [engine](/topics-engine-chevy/) light turned on and while driving for an hour and a half i lost a quarter of a tank of gas (I usually only fill up once a week) which has never happened, usually i can drive an hour and a half and only use a quarter of that, so I don’t know what’s going on

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com