GMC Sierra 2500 HD Classic Loud screeching noise when I start the car Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2)

Loud screeching noise when I start the car Inspection Service

How much does a Loud screeching noise when I start the car Inspection cost?

On average, the cost for a GMC Sierra 2500 HD Classic Loud screeching noise when I start the car Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 2500 HD ClassicV8-8.1LService typeLoud screeching noise when I start the car InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2007 GMC Sierra 2500 HD ClassicV8-6.6L Turbo DieselService typeLoud screeching noise when I start the car InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 GMC Sierra 2500 HD ClassicV8-6.0LService typeLoud screeching noise when I start the car InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example GMC Sierra 2500 HD Classic Loud screeching noise when I start the car Inspection prices

A car that screeches should always get immediate attention. Although the situation isn’t necessarily dire, belts, pulleys, and tensioners are what keep your engine and other components running properly, and damage to one of them is likely the culprit here.

Common reasons for this to happen:

Drive or auxiliary belts are worn

The most frequent cause of a car making screeching sounds is that the drive belts or auxiliary belts are old and need to be replaced. When your belts start to wear out and fray, the oils within them will come out and encourage all forms of screeching and slapping sounds.

Tensioners and pulleys are worn

The pulleys and belt tensioners that keep your belt in place can also wear out over the course of time. The tensioner helps keep the belt in place and under the right alignment, while the rubber inside your pulley helps absorb the vibrations that are generated from your engine. If this rubber part wears out, your belt may also begin to have wear issues.

Wrong torque, alignment or belt size

If the torque and alignment on the belt tensioner and pulley are incorrect, your belt may not have the proper pressure on it. Also, there are times when the wrong size belt has been installed. Different engines require different belts. If a belt is too big, it will start making sounds as well.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the screeching noise, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect the belts to see whether they are cracked, worn, or frayed. From there, the tensioners and pulleys may be looked at as well to make sure they are up to spec. Minimal wear and a good fit make all the difference with a screeching belt.

How important is this service?

Belt, pulleys, and tensioners make the difference between a quiet, perfectly running car, and a noisy one that may later result in a long list of repairs. Belts can snap due to age or improper installation, and big things like your engine can break, so it's advisable to get this issue diagnosed as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(2)

Rating Summary
2
0
0
0
0
2
0
0
0
0

Scott

34 years of experience
548 reviews
Scott
34 years of experience
GMC Sierra 2500 HD Classic V8-6.6L Turbo Diesel - Thermostat - Denver, Colorado
Scott did an excellent job. Would highly recommend his services.

Brandon

5 years of experience
36 reviews
Brandon
5 years of experience
GMC Sierra 2500 HD Classic V8-6.6L Turbo Diesel - Exterior Door Handle Replacement (Driver Side Front) - Gallatin, Tennessee
Very professional and done excellent work.

Luis

4 years of experience
130 reviews
Luis
4 years of experience
GMC Yukon V8-6.0L - Loud screeching noise when I start the car - Colonial Heights, Virginia
Very nice, professional and knowledgeable.

Arturo

27 years of experience
303 reviews
Arturo
27 years of experience
GMC Envoy L6-4.2L - Loud screeching noise when I start the car - Imperial Beach, California
Mr. Lopez was very knowledgeable, friendly, and arrived early. He diagnosed the issues quickly, showed them to me and provided the next steps.

Excellent Rating

(2)

Rating Summary
2
0
0
0
0
2
0
0
0
0
Number of GMC Loud screeching noise when I start the car Inspection services completed
22+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How All Wheel Drive Works
What What is All-Wheel Drive? All-Wheel Drive (AWD) vehicles send power to all four of the wheels. This can be done in a number of ways but the end goal is improved traction and performance for the vehicle. While All-Wheel...
P0531 OBD-II Trouble Code: A/C Refrigerant Pressure Sensor Circuit Performance
P0531 code means that there is too much or too little A/C refrigerant, high system pressure, faulty wiring, connectors, or cooling fans.
P2529 OBD-II Trouble Code: Vacuum Reservoir Press Sensor Circuit Intermmittent
P2529 code means the vacuum reservoir pressure sensor is not sending an input signal due to a defective vacuum sensor, pump, hose, valve, or a leak.

Fuel pump not getting power

The only quick fix I can think of is to check the inertia switch on the left side of your truck. It is a switched designed to shut off the fuel pump in the event of a crash. As they...

My car wont start, doesn't click and will not start with a jump either.

It sounds like your starter (https://www.yourmechanic.com/services/starter-replacement) has failed. There is also a slight possibility that the alternator (https://www.yourmechanic.com/services/alternator-replacement) is bad but I would say starter first. I would start with a charging system test and figure out what is causing...

Clicking when letting off the gas pedal.

The differential inside the transmission may be worn or have an issue with the bearings that is causing the clicking noise when loaded on the opposing side to the load applied when driving. Try to see if the noise occurs...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com