GMC Sierra 2500 HD Classic Crankshaft Harmonic Balancer Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Crankshaft Harmonic Balancer Replacement Service

How much does a Crankshaft Harmonic Balancer Replacement cost?

On average, the cost for a GMC Sierra 2500 HD Classic Crankshaft Harmonic Balancer Replacement is $413 with $119 for parts and $294 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 2500 HD ClassicV8-8.1LService typeCrankshaft Harmonic Balancer ReplacementEstimate$563.50Shop/Dealer Price$630.56 - $814.73
2007 GMC Sierra 2500 HD ClassicV8-6.6L Turbo DieselService typeCrankshaft Harmonic Balancer ReplacementEstimate$544.58Shop/Dealer Price$607.93 - $789.32
2007 GMC Sierra 2500 HD ClassicV8-6.0LService typeCrankshaft Harmonic Balancer ReplacementEstimate$544.58Shop/Dealer Price$607.98 - $789.41
Show example GMC Sierra 2500 HD Classic Crankshaft Harmonic Balancer Replacement prices

What is the Crankshaft Harmonic Balancer all about?

The harmonic balancer (also called “crank pulley damper”), connected to the crankshaft of an engine, reduces engine vibration and serves as a pulley for the drive belts. The balancer or “damper” is composed of two elements: a mass and an energy-dissipating element. The mass resists the acceleration of the vibration and the energy dissipating (rubber) element absorbs the vibrations. When the balancer fails, it is usually due to heat, salt, and or ozone deterioration of the rubber. General wear, tear, and stress on the rubber is also a factor.

Keep in mind:

Usually a problem with the harmonic balancer means that it needs to be replaced. However, sometimes the rubber insert that sits between the center and the outside of the pulley is all that is damaged. It is also possible for the bolt that holds the balancer in place to become loose, which can cause problems even if the pulley isn’t damaged.

How it's done:

  • Inspect the harmonic balancer.
  • Remove drive belts and balancer.
  • Inspect condition of crankshaft front seal.
  • Replace the harmonic balancer.
  • Reinstall drive belts.
  • Start car and check for proper operation.

Our recommendation:

Harmonic balancers aren’t a part of most standard inspections, so keep your eye out for warning signs. If you notice excess vibration or noise from the engine, then your balancer may be damaged, and you need to schedule an inspection.

What common symptoms indicate you may need to replace the Crankshaft Harmonic Balancer?

  • Vibration from engine.
  • Loud, abnormal engine noise, which increases with acceleration.

How important is this service?

The crankshaft harmonic balancer is connected to the crankshaft, and absorbs many of the vibrations that the engine creates. The engine creates a large amount of force that is delivered to the crankshaft, which transfers the power to the transmission. The harmonic balancer is responsible for absorbing some of the engine-created force so that the crankshaft doesn’t receive it all. When the harmonic balancer fails, the crankshaft receives all of the engine’s vibrations, and is susceptible to serious damage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Brandon

9 years of experience
133 reviews
Brandon
9 years of experience
GMC Sierra 2500 HD Classic V8-6.6L Turbo Diesel - Exterior Door Handle Replacement (Driver Side Front) - Gallatin, Tennessee
Very professional and done excellent work.

Scott

39 years of experience
607 reviews
Scott
39 years of experience
GMC Sierra 2500 HD Classic V8-6.6L Turbo Diesel - Thermostat - Denver, Colorado
Scott did an excellent job. Would highly recommend his services.

Rodney

37 years of experience
611 reviews
Rodney
37 years of experience
GMC Envoy L6-4.2L - Crankshaft Harmonic Balancer - Sacramento, California
Really great guy he's knowledgeable and super helpful i will definitely book with Rodney again

Harold

33 years of experience
52 reviews
Harold
33 years of experience
GMC Terrain L4-2.4L - Crankshaft Harmonic Balancer - Jacksonville, Florida
He was the only one who actually solved the issue rather than just continuing to put a bandaid on it, good job.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of GMC Crankshaft Harmonic Balancer Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Replace an AC Clutch Cycling Switch
An AC clutch cycling switch meters low side AC pressure. This switch helps the AC system maintain proper cabin and evaporator temperatures.
How to Wax Your Car
As As soon as your car leaves the showroom floor, its exterior finish is exposed to a vast array of harmful substances and circumstances. Acid rain, bird droppings, dust and sand, and even sunlight can cause your paint job to...
How to Buy a Good Quality Power Steering Fluid Reservoir
Your Your vehicle runs smoothly while you’re driving down the road due to the power steering fluid, making it important to assure that the fluid doesn’t leak. Check your power steering fluid reservoir regularly for cracks and chips and leakage...

Fuel Gauge stuck on empty

The fuel gauge sender in the fuel tank or the fuel gauge is defective. You will need to disconnect the fuel sender on the fuel tank and then turn on key to see if gauge moves. If not then you...

My truck won't shift to reverse

There are a few things that can cause this. Check the transmission fluid level to see if it is low. Sometimes low transmission fluid levels will prevent the transmission from shifting into gear. If you still have forward gears, but...

2004 mitsubishi endeavor overheating while driving, cools while idling or in traffic

Based on your description it sounds like the overheating is accompanied by a coolant leak (https://www.yourmechanic.com/services/coolant-is-leaking-inspection). Coolant leaks can be either a cause OR a consequence of overheating. Be sure not to drive the car if it is overheating because...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com