GMC Sierra 1500 HD Classic Windshield Washer Tubes Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,948)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,948)

Windshield Washer Tubes Replacement Service

How much does a Windshield Washer Tubes Replacement cost?

On average, the cost for a GMC Sierra 1500 HD Classic Windshield Washer Tubes Replacement is $118 with $23 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeWindshield Washer Tubes ReplacementEstimate$160.55Shop/Dealer Price$181.94 - $223.61
Show example GMC Sierra 1500 HD Classic Windshield Washer Tubes Replacement prices

What are the Windshield Washer Tubes all about?

It’s really about safety. Especially for those of you who live in cold and snowy climates, the windshield washer tubes allow you to remove much of the slushy snow and ice that accumulates on your windshield., In other climates, the washer tubes allow you to quickly remove mud and other impediments that would normally get stuck on your windshield.

Some of the symptoms that may make you think that the windshield washer tubes are defective may actually be due to the other components of your windshield washer system such as jets that are either clogged up or broken, or a reservoir that accumulated dirt or other contaminants that clog up the system. Your washer tubes are only one small part of a much larger set of items that guarantee a clean windshield.

Keep in mind:

The tubes and hoses that clean your windshield are a safety item first and foremost. On most vehicles, these tubes are made out of rubber or plastic hoses that easily clasp onto the windshield washer reservoir along with the jets that spray your windshield cleaning solution.

Due to their fragile composition, windshield washer tubes can split or crack over time. Also, using pure water when it’s below freezing can quickly result in their failure. Only keep windshield washer fluid in your reservoir if you live in a cold climate.

Our recommendation:

If you can’t see well out of your windshield and the washer fluid is nowhere to be found, have one of our expert mechanics inspect the entire cleaning system for your windshield. This way you can have the source of the system quickly identified and repaired. For most cars, the cost of replacing your washer tubes and other related parts is very reasonable.

What common symptoms indicate you may need to replace the Windshield Washer Tubes?

  • A lack of windshield washer spray on your windshield
  • Cracks and splits on the windshield washer tubes
  • Windshield washer tubes that are completely detached from their clasps and connections.

How important is this service?

Vision is one thing you should not compromise on when it comes to your daily driving. In the case of windshield washer tubes, you’re replacing a part that isn’t costly and can make a world of difference when it comes to safety. If you find that the washer fluid is just not making it to where it needs to go, then invest in a proper inspection.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(2,948)

Rating Summary
2,788
79
21
10
50
2,788
79
21
10
50

Roberto

9 years of experience
46 reviews
Roberto
9 years of experience
GMC Sierra 3500 HD V8-6.6L Turbo Diesel - Windshield Washer Tubes - Mesa, Arizona
Prompt and obviously knew what he was doing. Very satisfied with service.

TJ

22 years of experience
34 reviews
TJ
22 years of experience
GMC Yukon V8-5.3L - Oil Change - Gwynn Oak, Maryland
Great and will be call for another appt.

John

27 years of experience
1019 reviews
John
27 years of experience
GMC Yukon XL 1500 V8-5.3L - AC Compressor - Pearland, Texas
Thanks for the good job especially since you needed parts that you were not provided...

Michael

16 years of experience
606 reviews
Michael
16 years of experience
GMC Acadia V6-3.6L - Brake Pads Replacement (Front) - Woodstock, Georgia
He was great and I hope to use him again when I need maintenance or repair.

Excellent Rating

(2,948)

Rating Summary
2,788
79
21
10
50
2,788
79
21
10
50
Number of GMC services completed
32428+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How Long Does a Ball Joint Front Last?
Ball joints are an essential part of your car’s suspension. They connect your steering to your control arms, allowing you...
P0225 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch C Circuit Malfunction
P0225 P0225 code definition Throttle/Pedal Position Sensor/Switch C Circuit Malfunction What the P0225 code means P0225 is a generic OBD-II code which indicates that the throttle/pedal position sensor/switch C circuit has an internal failure. The sensor went out of range,...
How to Replace an Air Conditioning Belt
Replacing an AC belt can be challenging, as you have to locate specific parts in the car in order to do so, and use proper tools to complete the task.

Noise like brake pads over 35 or 40 no noise under 35

It sounds like you may have a weak ABS wheel sensor and a loose wheel bearing. When you hit the brakes, the sensor losing signal may be causing the ABS to activate. You would need to have the ABS diagnosed...

Car vibrating when its 40 miles and check engine light is on

The only real solution is to have diagnostics run to find out why the Check Engine Light is on. There are dozens of sensors between the engine, transmission, traction and anti-lock system that could be causing the poor performance (https://www.yourmechanic.com/services/loss-of-power-inspection)....

2001 Chevy Blazer distributor install.. it is at top dead center and the rotor lines up with the 6 but is not seated all the way.

If you are using the marks on the harmonic balancer to find TDC, occasionally the balancer will have shifted (the rubber bond breaks) causing the timing mark to be some degrees off. Consequently, the crankshaft is not really at TDC...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com