GMC Sierra 1500 HD Classic Oil level is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(3,002)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(3,002)

Oil level is low Inspection Service

How much does a Oil level is low Inspection cost?

On average, the cost for a GMC Sierra 1500 HD Classic Oil level is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 1500 HD ClassicV8-6.0LService typeOil level is low InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example GMC Sierra 1500 HD Classic Oil level is low Inspection prices

A vehicle needs oil to run and without it, or too little of it, severe damage can happen to the engine. Engine oil lubricates all of the major moving parts of the engine, which cuts down on wear and tear and dissipates the heat the engine generates. Not having enough oil in a vehicle can be deadly to the car’s engine.

Engine oil operates in a closed loop system so if the engine is losing oil at a significant rate, there is a problem somewhere, most likely a leak.

How this system works:

Engine oil is stored in the oil pan, which holds 4 to 6 quarts of oil depending on the vehicle. When the vehicle engine is started, the oil pump sucks oil from the oil pan through a part called the pickup tube. The oil is then pumped into the oil filter, which removes the dirt and debris that has accumulated in the oil. The engine oil then circulates throughout the engine via spurt holes before heading back to the oil pan where the process starts all over again.

Common reasons for this to happen:

  • Oil Light Comes On: The Low Oil Engine Warning light will illuminate when the oil level gets lower than it should in the oil pan. This warning light varies on vehicles but in most it looks like an oilcan with a droplet coming out of the spout. If this light illuminates for more than a couple of seconds at start-up the car should be inspected immediately as the oil level is too low in the car. This can lead to damage to critical engine components and expensive repairs.

  • Oil Leak: An oil leak can occur in just about any of the oil system components. Common problems are leaking or failing oil pan gaskets. As gaskets and seals age they tend to shrink and fail letting oil escape the system. A leaking gasket can quickly turn into an expensive repair if not addressed, as critical components will not have the lubrication they need to operate safely.

  • Worn Piston Rings: Piston rings help control the oil pressure in the vehicle. If they are worn or damaged the oil levels in the car will drop. Look for white or gray exhaust smoke, slow acceleration and excessive oil consumption. This problem can quickly damage critical and expensive engine components such as the pistons themselves and should be repaired quickly.

  • Faulty Worn Valve Guides: Valve guides are a cylindrical piece of metal that is pressed or cast into the cylinder head. They help to conduct heat away from the combustion process and into the cylinder head where it may be taken up by the cooling system. If valve guide seals are worn, cracked or broken the engine will suck oil down the guides and dump it into the cylinder, which will pull oil from the lubrication system. Oil levels will drop. This problem should be addressed as soon as possible.

  • Incorrect Oil Type: Engines can be filled with low viscosity synthetic oil, which reduces friction and increase fuel efficiency. A lower viscosity oil is thinner and can leak past rings and the seals on valve guides resulting in a loss of oil. Synthetic oil should not be used for the engine break-in period.

  • Assembly Mistakes: Piston rings that are not seated or sealed properly can cause oil to leak out of the engine. This problem can result in significant oil loss. The engine must be rebuilt to correct this problem.

What to expect:

Oil will become black and a bit gritty over time, this is normal and does not indicate that the oil needs to be changed. Most modern oils, especially the synthetics can last between 7,000 and 10,000 miles before they need to be changed.

How it's done:

A mechanic will inspect your car for oil leaks, the oil type and check to see if the oil level warning light is operating as it should. The mechanic will also inspect some related engine components. This will include valve guides, piston rings and more.

How important is this service?

Loss of engine oil is almost always a sign of a more serious problem. Engine oil is literally the lifeblood of the car and if the levels get too low it can damage critical components of the engine. Oil loss or high oil consumption should be investigated as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(3,002)

Rating Summary
2,842
79
21
10
50
2,842
79
21
10
50

Brian

23 years of experience
695 reviews
Brian
23 years of experience
GMC Sierra 1500 V8-5.3L - Brake Master Cylinder Replacement - Jacksonville, Florida
This is the best thing since sliced breed quick and easy.

Tony

15 years of experience
280 reviews
Tony
15 years of experience
GMC Envoy XL V8-5.3L - Car is making a noise - Fairburn, Georgia
Excellent as before.

Paul

25 years of experience
271 reviews
Paul
25 years of experience
GMC Terrain L4-2.4L - Serpentine/Drive Belt - Las Vegas, Nevada
Paul did a great job! I'd use him again.

Duane

25 years of experience
525 reviews
Duane
25 years of experience
GMC Yukon V8-5.7L - Smoke from engine or exhaust - Oceanside, California
The man came and diagnosed my truck in matter of seconds. Was phenomenally knowledgeable in what he was looking for and gave me answers to my questions about my truck. Would recommend this man to fix my truck in the future.

Excellent Rating

(3,002)

Rating Summary
2,842
79
21
10
50
2,842
79
21
10
50
Number of GMC services completed
33022+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

All About Car Battery Chargers
Everyone Everyone has experienced a dead car battery from time to time. It’s common occurance, especially in winter, when batteries have to work even harder to get you to where you want to go. Fortunately, there’s a solution. A portable...
P0062 OBD-II Trouble Code: HO2S Heater Control Circuit (Bank 2 Sensor 3)
P0062 P0062 trouble code definition Trouble code P0062 indicates that the heater circuit used to warm up an oxygen sensor has malfunctioned. A voltage ranging from 12.0-13.5 and a ground connection is required to operate the oxygen sensor. The cause...
P2065 OBD-II Trouble Code: Fuel Level Sensor B Circuit
P2065 means there was an irregular voltage signal from one of the fuel level sensors due to wiring issues, a damaged fuel tank or a faulty cluster.

How do I use the automatic dimming rearview mirror?

The rearview mirror can be dimmed for increased visibility at night. When it is dark outside, the brightness of headlights in the rearview mirror can make it hard for you to see, so you should always dim your rearview mirror...

Engine doesn't start but lights power on - 1986 Ford LTD Crown Victoria

You're thinking in the rigt direction! Something in the electrical power path to the starter motor is malfunctioning: starter solenoid or starter motor itself, ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement), or wiring to either of these components. A professional mechanic, like YourMechanic, can...

I need the routing diagram for a 2008 BMW X5 3.0 that bypasses the ac pump

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com