GMC R2500 Suburban Oil Pan Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Oil Pan Gasket Replacement Service

How much does a Oil Pan Gasket Replacement cost?

On average, the cost for a GMC R2500 Suburban Oil Pan Gasket Replacement is $373 with $58 for parts and $315 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
Show example GMC R2500 Suburban Oil Pan Gasket Replacement prices

What is the Oil Pan Gasket all about?

An oil pan is a metal container that contains the engine oil. The oil pan gasket seals the oil pan to the bottom of the engine. The engine has a lot of moving parts that need to be kept lubricated by the engine oil, without which the parts will damage each other. The oil pan and the gaskets are located under the car and are attached to the bottom of the engine. It is common for the gaskets to wear out and start leaking oil. You will see oil on the ground beneath your car. If the oil is leaking, you may see an engine oil warning light in the dashboard. If you continue to drive your car without the proper amount of oil, you will risk severe damage to the engine.

When replacing an oil pan gasket keep in mind:

  • If road debris has caused damage in your oil pan gasket, then your oil pan may be damaged as well.
  • Oil pan gaskets can collect grease from many leaking parts. It’s important for a mechanic to verify that the gasket is leaking directly from the oil pan, and not just collecting oil from a different leak.
  • Oil pan gaskets can be made out of many different materials.

Steps for changing an oil pan gasket

  • Check oil pan for leaks and damage.
  • Remove engine oil pan and gasket.
  • Remove oil and filter.
  • Clean oil pan.
  • Install new gasket.
  • Add new engine oil and filter.
  • Run engine to operating temperature and check for any oil leaks.

When to replace an oil pan gasket

Any time your vehicle is serviced or inspected, you should have the oil checked. Even if a mechanic doesn’t look at your oil pan gasket directly, simply checking the oil will usually indicate if there’s a problem. If your Oil Low warning light becomes illuminated or you notice that your vehicle is leaking oil, schedule an inspection immediately.

What common symptoms indicate you may need to replace the Oil Pan Gasket?

  • Consistent oil leak in the same spot under your car.
  • Smoke from engine compartment due to oil leaking on hot exhaust pipes.

How important is replacing an oil pan gasket?

Your engine needs oil to function properly and safely. The oil in your car is collected and stored in the oil pan. The oil pan gasket acts as a seal for the oil pan. When the gaskets are damaged, oil will leak out of the oil pan, past the gaskets, and out of your engine. As a result, your engine will lose oil, which can result in catastrophic engine damage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(9)

Rating Summary
8
1
0
0
0
8
1
0
0
0

Jose

11 years of experience
285 reviews
Jose
11 years of experience
GMC Envoy V8-5.3L - Oil Pan Gasket - Brandon, Florida
Jose is a sincere hard working young man. He did a 14 hour job in 7 hours! Awesome! Highly recommend him for your next vehicle repair.

Rodney

37 years of experience
611 reviews
Rodney
37 years of experience
GMC Yukon XL 1500 V8-5.3L - Oil Pan Gasket - Rocklin, California
Rodney did a great job today and was finished in roughly 3.5 hours. He would have finished earlier if I didn't interrupt him with so many questions throughout the morning! Thanks for a job well done!

Raymond

38 years of experience
613 reviews
Raymond
38 years of experience
GMC Sierra 1500 V8-5.3L - Oil Pan Gasket - Henderson, Nevada
Got the job done, showed up on time and did the needed work.

Emanuel

19 years of experience
81 reviews
Emanuel
19 years of experience
GMC Yukon XL 1500 V8-6.2L - Oil Pan Gasket - Katy, Texas
Great job. timely and professional. Exactly as planned.

Excellent Rating

(9)

Rating Summary
8
1
0
0
0
8
1
0
0
0
Number of GMC Oil Pan Gasket Replacement services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Brake Booster Vacuum Sensor
A failing brake booster vacuum sensor will cause the brake pedal to be stiff or turn on the Check Engine Light.
How to Replace a Door Latch
A car lock involves the door lock assembly, which includes a car door latch. Replacing this is similar for both electronic and mechanical door locks.
P0212 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 12
P0212 P0212 code definition Injector Circuit Malfunction - Cylinder 12 What the P212 code means P0212 is telling us the Engine Control Module (ECM) has detected a fault within the cylinder 12 fuel injector circuit. This code is specifically set...

Clunking car when I go over bumps

Basically, any bolted on or "jointed" moving part or bushing could account for noise in the front end. Not included in your list are rack and pinion mounts/bushings, strut bearings, tie rod ends, even brake parts (caliper torque plate), loose...

My seat won’t recline forward 2007 Nissan altima

If you have a non-powered seat, the cause could be mechanical in nature and involve levers and/or the seat track. If you have a powered seat, depending on exactly what you mean by "recline" the problem could be electrical and/or...

Transmission fluid keeps leaking

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com