GMC G2500 Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(22)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(22)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a GMC G2500 Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1980 GMC G2500V8-5.7LService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1981 GMC G2500V8-5.7LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1981 GMC G2500V8-5.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1992 GMC G2500V8-5.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1985 GMC G2500V8-5.7LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1991 GMC G2500V8-6.2L DieselService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 GMC G2500V8-5.7LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1982 GMC G2500V8-5.0LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC G2500 Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(22)

Rating Summary
22
0
0
0
0
22
0
0
0
0

John

19 years of experience
86 reviews
John
19 years of experience
GMC G2500 V8-5.7L - Coolant is leaking - Memphis, Tennessee
Very knowledgeable, excellent work ethic, on time, and pleasant.

Jose

17 years of experience
154 reviews
Jose
17 years of experience
GMC G2500 V8-5.7L - Crankshaft Harmonic Balancer - Henderson, Nevada
I sure wish I had found the YOUR MECHANIC site two months ago. I know that I would have saved quite a lot of money using your services on my vehicles. Jose was EXCEPTIONAL in ALL aspects and got the job completed in the estimated time, even though the original Harmonic Balancer was quite difficult to remove from my Van. He also checked numerous things about my van to make sure all was okay and that impressed me. Thank you, Jose. I have already recommended you and YOUR MECHANIC to several friends and family.

Jeffrey

27 years of experience
870 reviews
Jeffrey
27 years of experience
GMC G2500 V8-5.7L - Starter - Charlotte, North Carolina
Jeffrey was on time and did a great job as usual.Thanks Jeffrey!

Trevor

22 years of experience
185 reviews
Trevor
22 years of experience
GMC G2500 V8-5.7L - Ball Joint Front Replacement (Upper Left) - Carlsbad, California
Trevor was awesome!! Arrived on time, and got the job done! Great job!!

Excellent Rating

(22)

Rating Summary
22
0
0
0
0
22
0
0
0
0
Number of GMC G2500 services completed
242+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P2018 OBD-II Trouble Code: Intake Manifold Runner Position Sensor/Switch Circuit Intermittent Bank 1
P2018 P2018 trouble code definition Intake Manifold Runner Position Sensor/Switch Circuit Intermittent Bank 1 What the P2018 code means P2018 is an OBD-II generic code for the engine control module (ECM) detecting a an intermittent failure in the intake manifold...
How to Replace a Car Door Panel
You You may have that annoying rattle coming from your door as you drive, your window may no longer work,our door locks or handles may not function properly, or you may even have a problem with the switches on the...
How Far Can You Drive on Empty in the UK?
Know how many miles you can drive on an empty gas tank to prevent a breakdown. Citroen C4 Picassos can go the farthest when the low fuel light is on.

Car makes squeaking noise while driving.

Hello and thanks for the question, it sounds like you are describing a problem with your accessory drive belt. Your engine uses one belt to run all of its accessories such as water pump, air conditioner, alternator. This belt over...

My 08 scion xb vibrates at 55 mph

You did not specify the transmission you have but the problem sounds like an issue with the constant velocity inner joint. When these joints start to have problems with vibration they are known to exhibit problems under a load and...

Ford Edge Powertrain Warning Light

Hello and thank you for contacting Your Mechanic. The issue could be the wiring inside the transmission or the harness to the transmission. Check the harness to the transmission for any debris, corrosion, or broken / bent wires. Use a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com