GMC G1500 Engine is sputtering Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,942)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,942)

Engine is sputtering Inspection Service

How much does a Engine is sputtering Inspection cost?

On average, the cost for a GMC G1500 Engine is sputtering Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1983 GMC G1500V8-5.7LService typeEngine is sputtering InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1979 GMC G1500L6-4.1LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1992 GMC G1500V6-4.3LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1986 GMC G1500V8-5.0LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1981 GMC G1500L6-4.1LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1993 GMC G1500V8-5.0LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1994 GMC G1500V8-5.0LService typeEngine is sputtering InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1982 GMC G1500L6-4.1LService typeEngine is sputtering InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example GMC G1500 Engine is sputtering Inspection prices

In almost all cases, a sputtering engine is trying to tell you that there is a deeper problem that requires immediate attention. An engine running out of gas will definitely sputter but if the gas gauge indicates full, the problem lies deeper inside the engine compartment.

An incomplete combustion in the engine will cause a sputter as can the ignition system. The fuel system, such as a blocked fuel injector may also cause the vehicle to sputter. While a sputtering engine may not seem like a major issue, it is a symptom of a bigger problem that will not self-correct and will eventually result in a much more expensive repair. The source of the sputter should be investigated and repaired as soon as possible.

How this system works:

A sputtering engine can have its root cause located in a number of different systems. Here are two of the more common ones, the exhaust and fuel system.

The exhaust system collects exhaust gases from the cylinder head via the exhaust manifold, which acts as a funnel diverting exhaust gases away from the cylinders. The gases are then released through the front pipe where they travel to the catalytic converter. The catalytic converter removes the harmful elements of the gases such as carbon monoxide and hydrogen monoxide, converting them into inert gases.

The gases exit the catalytic converter into the muffler, which reduces the noise levels of the engine, and finally the exhaust fumes exit the vehicle at the tail pipe.

The fuel system is responsible for storing and supplying fuel to the car to drive the engine. Fuel is mixed with air, atomized and vaporized. This happens in the engine intake system. This mixture is then compressed in the engine cylinder and then ignited which produces the energy which moves the pistons.

Common reasons for this to happen:

  • Leak in Exhaust Manifold: A leak in the exhaust manifold, which collects exhaust gases, can cause the engine to sputter or run unevenly. This condition can also cause the Check Engine light to trigger as well as present increased engine noise and poor performance from the engine. A cracked or leaking exhaust manifold can create dangerous driving condition as the escaping hot gases can melt nearby plastic components. It can also lead to exhaust fumes making their way into the car cabin.

  • Worn Seals or Gaskets: There are a number of gaskets and seals in the exhaust system and if any of them are failing it can create a rough or sputtering engine. Gaskets and seals wear down over time and will eventually have to be replaced. Failing to do this in a timely manner can damage the exhaust manifold which is a much more expensive repair.

  • Failing Catalytic Converter: If the engine is sputtering, running rough and has a smell of rotten eggs it is probably due to a failing catalytic converter. In most cases, the Check Engine light will trigger as well. When a converter starts to fail, it isn’t able to burn off the hydrocarbons in the exhaust, and is no longer breaking down the sulfur created by the engine. This leads to the strong rotten egg smell. Eventually the car will not start at all as the catalytic converter becomes totally blocked.

  • Malfunctioning Oxygen Sensors: Oxygen sensors measure how rich or lean the exhaust gases are when they leave the vehicles combustion chamber. The vehicle computer uses this information to adjust the amount of fuel entering the engine. A dirty or failing sensor puts too much or too little fuel into the engine causing it to run rough or sputter. Oxygen sensors must be replaced on a regular basis.

  • Dirty Fuel Injectors: Fuel injectors spray fuel into the cylinders. It is then mixed with air and ignited. Fuel injector nozzles can become clogged over time, which can lead to a sputtering engine, slow acceleration and the car not having enough power. Fuel injectors can be cleaned if the problem is caught early, but as the conditions worsens, the injectors may have to be replaced.

  • Bad or Dirty Spark Plugs: Spark plugs are responsible for igniting the fuel in the combustion chamber. If they are not working correctly or are dirty they don’t ignite the fuel cleanly and the car can misfire or sputter. The plugs will need to be replaced or cleaned.

  • Dirty Mass Airflow Sensor: The mass airflow sensor measures the amount of air that is entering the fuel injection system. It sends that information to the vehicle computer, which then delivers the proper amount of fuel to the combustion chamber. A dirty mass airflow sensor will send the wrong information the computer resulting in a rough running or sputtering engine.

  • Vacuum Leak: A leak in the vacuum system can lead to a sputtering or rough running engine. As the problem progresses the vehicle can hesitate or stall when accelerating.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the engine is sputtering issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

A mechanic will inspect your car's exhaust system and other important components of your vehicle. This includes the exhaust manifold, exhaust seals and gaskets, oxygen sensors, airflow sensors and more. It may be necessary for the mechanic to crank up your car to diagnose your engine's sputtering.

How important is this service?

In almost all cases, a sputter engine is a symptom of a more serious issue lurking below the surface. If the problem is not diagnosed and repaired in a timely manner the vehicle will likely start to stall, become hard to start and eventually stop running altogether.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(2,942)

Rating Summary
2,783
79
21
9
50
2,783
79
21
9
50

Jeff

13 years of experience
46 reviews
Jeff
13 years of experience
GMC Envoy L6-4.2L - Engine is sputtering Inspection - Gaithersburg, Maryland
Very informative

Joel

21 years of experience
987 reviews
Joel
21 years of experience
GMC Yukon V8-5.3L - Window is not working - Ponte Vedra Beach, Florida
Joel was genuinely nice, very professional and seems to be very experienced. I trust his knowledge and trust him to work on my auto.

Luis

18 years of experience
321 reviews
Luis
18 years of experience
GMC Envoy L6-4.2L - Oil Change - Nutley, New Jersey
He was on time. Friendly and explain the problem with the cars.

Robert

20 years of experience
1092 reviews
Robert
20 years of experience
GMC Terrain V6-3.0L - Power Steering Pump Replacement - Thornton, Colorado
Robert was able to replace my powering steering pump. He was on time, came to my house. He was able to complete his work in the blistering summer sun mid-day! I have no issues with the car and I'm going on a little over two weeks. I followed up with a phone call about my check engine light coming on, right after he left- we worked through how to fix it with a battery reset. I was very pleased with the overall service and parts utilized. I think getting a quote and standing by the quote based on the final fix required is a great way to run a business. He was able to complete the work by more than half the time quoted by another company. I was only down the vehicle for a couple of hours. I would use Robert again as well as Yourmechanic.com.

Excellent Rating

(2,942)

Rating Summary
2,783
79
21
9
50
2,783
79
21
9
50
Number of GMC services completed
32362+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P2126 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch E Circuit Range/Performance
Diagnostic Diagnostic Trouble Code (DTC): P2126 P2126 code definition Throttle/Pedal Position Sensor/Switch E Circuit Range/Performance Related Trouble Codes: P2120: Throttle/Pedal Position Sensor/Switch D Circuit P2121: Throttle/Pedal Position Sensor/Switch D Circuit Range/Performance P2122: Throttle/Pedal Position Sensor/Switch D Circuit Low Input P2123:...
What are the Car Pool Rules in North Carolina?
North North Carolina is a state known more for its rural, scenic regions (https://www.yourmechanic.com/article/top-10-scenic-drives-in-north-carolina) than its large cities. But with tech companies booming in the Research Triangle, North Carolina has become a hotspot with a large number of workers. Many...
How to Replace an Interior Car Door Handle
The inside handles on car doors fail when the handles come loose or when the doors are either hard to open or will not open at all.

Need help from a Mechanic: EVAP Purge Valve bill

The part is only about $35, so then that leaves about $200 in labor. This labor should be better-explained to you so you know what was done. The labor to replace the purge valve on the engine is only 0.6...

What's the difference between the ECM and PCM?

The engine control module (ECM) controls all the engine functions to keep it running correctly monitoring all the sensors of the engine. The power train control module (PCM) will include multiple control modules in one case called a PCM. The...

I have a 2002 Ford Expedition, lost the key last year and instead of paying all the money and getting a new key with chip recoding my husband put a new brain in doesn't affect whether or not I have a key with chip. Now I've lost the key again and I think the used to the fuel pump is blown. My question is do you know what amp fuse it is so that I can be prepared when I go down to where the truck is at to put it in

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com