GMC Envoy Throttle Body Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a GMC Envoy Throttle Body Replacement is $457 with $317 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2007 GMC EnvoyL6-4.2L	Service typeThrottle Body Replacement	Estimate$1288.82	Shop/Dealer Price$1575.88 - $2428.94
2005 GMC EnvoyL6-4.2L	Service typeThrottle Body Replacement	Estimate$1279.81	Shop/Dealer Price$1565.10 - $2416.84
2007 GMC EnvoyV8-5.3L	Service typeThrottle Body Replacement	Estimate$813.29	Shop/Dealer Price$981.97 - $1483.84
2008 GMC EnvoyV8-5.3L	Service typeThrottle Body Replacement	Estimate$813.29	Shop/Dealer Price$981.97 - $1483.84
2009 GMC EnvoyL6-4.2L	Service typeThrottle Body Replacement	Estimate$779.55	Shop/Dealer Price$941.27 - $1418.94
2008 GMC EnvoyL6-4.2L	Service typeThrottle Body Replacement	Estimate$779.55	Shop/Dealer Price$939.94 - $1416.61
2006 GMC EnvoyL6-4.2L	Service typeThrottle Body Replacement	Estimate$1279.81	Shop/Dealer Price$1565.14 - $2416.91
2003 GMC EnvoyL6-4.2L	Service typeThrottle Body Replacement	Estimate$1279.81	Shop/Dealer Price$1565.12 - $2416.88

Show example GMC Envoy Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

The engine cover is removed, if necessary.
The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
The electrical connections to the throttle body are removed.
If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
All cables and electrical connections are restored. The intake air snorkel is reconnected.
If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(279)

Rating Summary

261

10

2

0

6

261

10

2

0

6

SEE REVIEWS NEAR ME

Jonathan

25 years of experience

42 reviews

Request Jonathan

Jonathan

25 years of experience

Request Jonathan

by Kimberly Brown

Envoy 2002 - Check Engine Light is on - Atlanta, GA

Jonathan was amazing !!!! Incredibly friendly and extremely knowledgeable! I am very satisfied! Thank you Jonathan for making such a frustrating car situation feel like I have options now !

Ronnie

28 years of experience

65 reviews

Ronnie

28 years of experience

by Alison Starpoli

Envoy 2004 - Oil Change - Nashville, TN

Top of the line mechanic for certain , my only complaint was a lack of communication ...

Ronnie

28 years of experience

65 reviews

Ronnie

28 years of experience

by Alison Starpoli

Envoy 2004 - Control Arm Assembly - Nashville, TN

Top of the line mechanic for certain , my only complaint was a lack of communication ...

Ronnie

28 years of experience

65 reviews

Ronnie

28 years of experience

by Alison Starpoli

Envoy 2004 - Ball Joint Front - Nashville, TN

Top of the line mechanic for certain , my only complaint was a lack of communication ...

Excellent Rating

(279)

Rating Summary

261

10

2

0

6

261

10

2

0

6

SEE REVIEWS NEAR ME

Recent articles & questions

P0390 OBD-II Trouble Code: Camshaft Position Sensor “B” Circuit (Bank 2)

Trouble code P0390 means the PCM does not detect the camshaft position sensor B signal and is very similar to trouble code P0345.

How to Transfer a Car Title in North Carolina

In In the state of North Carolina, vehicle ownership is shown by the name on the car’s title. When ownership changes, the title needs to be transferred from the previous owner to the new owner. This happens when a vehicle...

How Often Do I Need to Replace the Transmission Fluid?

The basic definition of a transmission is the part of a vehicle that transfers the power from the engine to the wheels. How...

Brake lights don't work after replacing brake pedal switch

I can personally understand how frustrating it can be to try to get your brake lights working properly, and it looks like you have already put in a lot of effort to have it fixed! Having the information about your...

Front tires screeching when turning

Hi, it sounds like the wheel bearing is starting to wear out on the right side. When you turn left all of the weight of the car is shifted to the opposite side which is extra stress then on the...

my alternator as failed twice and i think due to oil leaking into it. i had the valve cover gaskets changed and i'm still getting

Hi there. It is possible for oil to soak into electrical components of an alternator and cause it to fail prematurely. If the oil leak still exists after completing the recent valve cover gasket changed, it's possible that the source...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com