GMC Envoy Throttle/Accelerator Pedal Position Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(279)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(279)

Throttle/Accelerator Pedal Position Sensor Replacement Service

How much does a Throttle/Accelerator Pedal Position Sensor Replacement cost?

On average, the cost for a GMC Envoy Throttle/Accelerator Pedal Position Sensor Replacement is $345 with $250 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 GMC EnvoyL6-4.2LService typeThrottle/Accelerator Pedal Position Sensor ReplacementEstimate$615.95Shop/Dealer Price$751.19 - $1134.41
Show example GMC Envoy Throttle/Accelerator Pedal Position Sensor Replacement prices

What is the Throttle/Accelerator Pedal Position Sensor all about?

On older vehicle designs, a simple throttle cable connects the accelerator pedal to the engine and controls the amount of fuel delivered to the engine. However, with fuel injected systems, that has changed. Newer engines now use electronics to control the amount of fuel sent to the engine based on accelerator pedal movement. This is the job of the accelerator pedal position sensor. It’s mounted to the gas pedal, and essentially translates the movement of the pedal (speed and position) into voltage, which tells the car’s computer how much fuel to supply for engine acceleration.

Keep in mind:

  • It’s impossible to check the operation of the accelerator pedal position sensor visually as it requires a voltmeter and an understanding of the proper voltage output range.
  • It’s possible for an accelerator pedal position sensor to operate intermittently.
  • A discrepancy in voltage will put the computer into “limp” mode, which provides significantly reduced power to prevent damage.

How it's done:

  • The throttle pedal position sensor is verified that it needs to be replaced. The throttle trim cover is then removed to access the sensor .
  • The defective throttle pedal position sensor is disconnected and removed.

  • The new throttle pedal position sensor is installed onto the firewall and reconnected.

  • The engine is started and the throttle pedal position sensor is tested for operation. The trim panel is then reinstalled.

  • The vehicle is road tested to ensure proper operation of the throttle pedal position sensor.

Our recommendation:

There is no set service or replacement period for your accelerator pedal position sensor. If you suspect a problem with your accelerator pedal position sensor, have one of our expert mechanics diagnose the system.

What common symptoms indicate you may need to replace the Throttle/Accelerator Pedal Position Sensor?

  • Lagging or intermittent acceleration
  • No acceleration
  • Limited power (limp mode)
  • No throttle response in Park or Neutral

How important is this service?

Because the accelerator pedal position sensor tells the car’s computer how quickly you’re depressing the accelerator pedal and controls the supply of fuel to the engine, replacement is very important. While your car will continue to operate even if there is a problem with the sensor, it will do so with limited capacity. Our experienced mechanics will use a voltmeter to determine sensor operation and diagnose the problem accurately. Have a faulty accelerator pedal position sensor replaced immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(279)

Rating Summary
261
10
2
0
6
261
10
2
0
6

Jonathan

25 years of experience
42 reviews
Jonathan
25 years of experience
Envoy 2002 - Check Engine Light is on - Atlanta, GA
Jonathan was amazing !!!! Incredibly friendly and extremely knowledgeable! I am very satisfied! Thank you Jonathan for making such a frustrating car situation feel like I have options now !

Ronnie

28 years of experience
65 reviews
Ronnie
28 years of experience
Envoy 2004 - Oil Change - Nashville, TN
Top of the line mechanic for certain , my only complaint was a lack of communication ...

Ronnie

28 years of experience
65 reviews
Ronnie
28 years of experience
Envoy 2004 - Control Arm Assembly - Nashville, TN
Top of the line mechanic for certain , my only complaint was a lack of communication ...

Ronnie

28 years of experience
65 reviews
Ronnie
28 years of experience
Envoy 2004 - Ball Joint Front - Nashville, TN
Top of the line mechanic for certain , my only complaint was a lack of communication ...

Excellent Rating

(279)

Rating Summary
261
10
2
0
6
261
10
2
0
6
Number of GMC Envoy services completed
3069+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How Long Does an Ambient Temperature Sensor (Switch) Last?
In In many late-model vehicles, the need to manually adjust heat and air conditioning has been eliminated. You can actually set your car’s computer to regulate the cooling and heating process based on the temperature at which you feel most...
How Long Does an Injector Control Pressure Sensor Last?
A A diesel engine is a very sensitive and complicated piece of machinery. Getting a diesel to crank will require a number of parts to work together. Among the most vital systems on a diesel engine is the fuel injection....
How to Replace a Steering Angle Sensor
A steering angle sensor fails if the Traction Control Light illuminates, the steering wheel feels loose, or the vehicle drives differently.

The car won't start, but I think it is the crank sensor, not the starter.

It is possible that your crank sensor may be at fault for your vehicle not starting. If the crank sensor goes bad (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) the engine can not fire the spark plugs or the fuel injectors. This is a pretty common...

Do I need a new alternator?

I would recommend having your alternator (https://www.yourmechanic.com/services/alternator-replacement) tested for proper function with a digital multimeter by a qualified technician. This test will determine if the alternator is charging the battery at the proper levels. If the alternator is not charging...

2010 Ford Fusion SE with I4 Engine - Throttle Position (TP) and Accelerator Pedal Position (APP) sensors

Since the code reads Throttle Body, the sensor on the throttle body under the hood may be the best place to start. The throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement) measures the angle of the throttle plate and tries to match the effort...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com