Ford Taurus Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(51)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(51)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Ford Taurus Brake Pad Replacement is $186 with $46 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Ford TaurusV6-3.8LService typeBrake Pads - Rear ReplacementEstimate$482.72Shop/Dealer Price$533.10 - $668.04
1995 Ford TaurusV6-3.2LService typeBrake Pads - Rear ReplacementEstimate$365.51Shop/Dealer Price$408.35 - $531.12
2016 Ford TaurusL4-2.0L TurboService typeBrake Pads - Front ReplacementEstimate$307.11Shop/Dealer Price$349.25 - $471.48
2016 Ford TaurusV6-3.5L TurboService typeBrake Pads - Front ReplacementEstimate$307.11Shop/Dealer Price$349.25 - $471.48
2009 Ford TaurusV6-3.5LService typeBrake Pads - Rear ReplacementEstimate$307.11Shop/Dealer Price$350.72 - $474.06
2015 Ford TaurusL4-2.0L TurboService typeBrake Pads - Front ReplacementEstimate$307.11Shop/Dealer Price$349.39 - $471.73
1993 Ford TaurusV6-3.8LService typeBrake Pads - Rear ReplacementEstimate$365.51Shop/Dealer Price$408.41 - $531.22
1990 Ford TaurusL4-2.5LService typeBrake Pads - Front ReplacementEstimate$336.31Shop/Dealer Price$378.82 - $501.33
Show example Ford Taurus Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(51)

Rating Summary
49
2
0
0
0
49
2
0
0
0

Pardeep

16 years of experience
1060 reviews
Pardeep
16 years of experience
Taurus 1997 - Brake Pads - Campbell, CA
Pardeep always does a good job, timely and we'll see if he can keep my 1997 Taurus on the road for a few more years.

Charles

26 years of experience
21 reviews
Charles
26 years of experience
Taurus 2003 - Fuel is leaking from gas tank - Altadena, CA
Charles arrived exactly on time, and was very courteous and knowledgeable. He quickly identified the source of my fuel leak, and suggested a course of action. I will be following up on his suggestion. I highly recommend Charles, and the "Your Mechanic" service to everyone.

William

14 years of experience
95 reviews
William
14 years of experience
Taurus 2000 - Air Pump - Denver, CO
Will arrived early, was informative and completed the requested repair in the time frame estimated. He also provided an assessment of other items which should be addressed.

William

14 years of experience
95 reviews
William
14 years of experience
Taurus 2007 - Fuel Pump - Denver, CO
William showed up on time. Very knowledgeable, courteous, pleasant to talk to. He explained what he was doing. Asked him what SUV he would recommend. He said any of the mechanics could even go and do a 125 point inspection on a vehicle I may be thinking of buying in the future which I thought was great. He is fantastic. Will definitely use William again for any car repairs.

Excellent Rating

(51)

Rating Summary
49
2
0
0
0
49
2
0
0
0
Number of Ford Taurus Brake Pad Replacement services completed
561+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

P0826 OBD-II Trouble Code: Up and Down Switch Input Circuit
P0826 means there is an issue with a circuit for the up and down switch, usually due to a disabled manual shifter or TCM placed in Limo-in mode.
5 Essential Things to Know About Remote Starters
Remote Remote starters are great for those frigid mornings when you want to slide into a nice and toasty vehicle for the drive to work. However, before you rush out and purchase one, there are a few things you need...
Is YourMechanic in My City?
Like Like many successful companies with modest beginnings, YourMechanic started with just one mechanic in one city in California in 2012. Since then, we’ve expanded to over 700 U.S. cities, with top-rated mechanics in every one - and we’re growing...

Windshield wiper linkage

Hello, thank you for writing in. It is likely they were not installed correctly. It may be that they were left loose, or any number of other installation issues. Typically installing wiper blades is straight forward and easy. The best...

is it normal for an engine light that's been reset after service to come back on?

Any given diagnostic trouble code will typically have multiple faults listed as potential causes of "the" code setting. It is possible for one fault (in your case an oxygen sensor that might not be putting out the expected waveform) to...

I have code p0300 and p0301 how do I fix this or where do I start

It sounds like you may have a problem with one or more cylinders misfiring. Engine misfires (https://www.yourmechanic.com/services/engine-is-misfiring-inspection) can be caused by many different problems and are generally caused by either a spark or fuel issue or in some cases, a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com