Ford F-250 HD Crankshaft Harmonic Balancer Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Crankshaft Harmonic Balancer Replacement Service

How much does a Crankshaft Harmonic Balancer Replacement cost?

On average, the cost for a Ford F-250 HD Crankshaft Harmonic Balancer Replacement is $363 with $230 for parts and $133 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Ford F-250 HDV8-7.5LService typeCrankshaft Harmonic Balancer ReplacementEstimate$621.73Shop/Dealer Price$750.91 - $1106.97
1997 Ford F-250 HDV8-5.8LService typeCrankshaft Harmonic Balancer ReplacementEstimate$593.73Shop/Dealer Price$722.94 - $1079.01
1997 Ford F-250 HDV8-7.3L Turbo DieselService typeCrankshaft Harmonic Balancer ReplacementEstimate$593.73Shop/Dealer Price$722.94 - $1079.01
Show example Ford F-250 HD Crankshaft Harmonic Balancer Replacement prices

What is the Crankshaft Harmonic Balancer all about?

The harmonic balancer (also called “crank pulley damper”), connected to the crankshaft of an engine, reduces engine vibration and serves as a pulley for the drive belts. The balancer or “damper” is composed of two elements: a mass and an energy-dissipating element. The mass resists the acceleration of the vibration and the energy dissipating (rubber) element absorbs the vibrations. When the balancer fails, it is usually due to heat, salt, and or ozone deterioration of the rubber. General wear, tear, and stress on the rubber is also a factor.

Keep in mind:

Usually a problem with the harmonic balancer means that it needs to be replaced. However, sometimes the rubber insert that sits between the center and the outside of the pulley is all that is damaged. It is also possible for the bolt that holds the balancer in place to become loose, which can cause problems even if the pulley isn’t damaged.

How it's done:

  • Inspect the harmonic balancer.
  • Remove drive belts and balancer.
  • Inspect condition of crankshaft front seal.
  • Replace the harmonic balancer.
  • Reinstall drive belts.
  • Start car and check for proper operation.

Our recommendation:

Harmonic balancers aren’t a part of most standard inspections, so keep your eye out for warning signs. If you notice excess vibration or noise from the engine, then your balancer may be damaged, and you need to schedule an inspection.

What common symptoms indicate you may need to replace the Crankshaft Harmonic Balancer?

  • Vibration from engine.
  • Loud, abnormal engine noise, which increases with acceleration.

How important is this service?

The crankshaft harmonic balancer is connected to the crankshaft, and absorbs many of the vibrations that the engine creates. The engine creates a large amount of force that is delivered to the crankshaft, which transfers the power to the transmission. The harmonic balancer is responsible for absorbing some of the engine-created force so that the crankshaft doesn’t receive it all. When the harmonic balancer fails, the crankshaft receives all of the engine’s vibrations, and is susceptible to serious damage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(12)

Rating Summary
10
1
0
0
1
10
1
0
0
1

Patrick

11 years of experience
159 reviews
Patrick
11 years of experience
Ford F-250 HD V8-7.3L Turbo Diesel - Starter - Mesa, Arizona
Patrick seemed very knowledgeable, and was very friendly.

Chris

22 years of experience
2223 reviews
Chris
22 years of experience
Ford F-250 HD V8-7.3L Turbo Diesel - Car is making a noise - Costa Mesa, California
Super knowledgeable, quick, fixed my problem right on the spot!

Robert

20 years of experience
1089 reviews
Robert
20 years of experience
Ford F-250 HD V8-7.3L Turbo Diesel - Bleed Brakes - Denver, Colorado
After he left,I took truck for a drive, still felt a little squishy on the peddle, took his advise went to a parking lot and did some break adjusting, I did notice a trail of break fluid for about 20 to 30 feet, I plan on a road test in the morning.

Cesar

9 years of experience
292 reviews
Cesar
9 years of experience
Ford F-250 HD V8-7.5L - Battery - Monroe, Washington
Thank you

Excellent Rating

(12)

Rating Summary
10
1
0
0
1
10
1
0
0
1
Number of Ford F-250 HD services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Chevrolet Tahoe
The The Chevy Tahoe has always been one of the most popular SUVs on the market, and this trend continued in 2012. As always, the vehicle proved to be reliable and powerful, with plenty of space and features that people...
How to Quickly and Accurately Find the Source of an Oil Leak
When it comes down to car fluid leaks, oil leaks are among the most common. Degreaser and U/V leak detector kits can help you find the source.
How to Replace a Car Air Conditioning (AC) Low Pressure Hose
Car air conditioning (AC) low pressure hoses carry refrigerant back into the compressor to keep providing cold air in a closed loop system.

How do I activate the immobilizer system?

The immobilizer system keeps your vehicle from being turned on with an invalid key. When the immobilizer system is activated, only a valid key can be used with the car. The system will automatically active when the ignition is turned...

Problems or issues with the porche panamera

As you know, with any car the life expectancy of it depends largely on the maintenance schedule the owner has maintained, the driving conditions it is subjected to, the driving habits of the owner and many other factors. Often times...

Knocking noise/rattle underneath my car when I accelerate about 2000rpm-3000rpm and stops after the trans shifts

It sounds like you may possibly have a broken motor mount. As you may know, motor mounts (https://www.yourmechanic.com/services/engine-mount-replacement) are steel mounted brackets that secure the motor and transmission to the chassis of the vehicle. They have rubber internals in them...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com