Ford F-150 Heritage Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(26)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(26)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Ford F-150 Heritage Power Steering Pressure Hose Replacement is $183 with $60 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Ford F-150 HeritageV6-4.2LService typePower Steering Pressure Hose ReplacementEstimate$269.19Shop/Dealer Price$312.11 - $411.64
2004 Ford F-150 HeritageV8-5.4L TurboService typePower Steering Pressure Hose ReplacementEstimate$363.09Shop/Dealer Price$436.01 - $625.48
2004 Ford F-150 HeritageV8-5.4LService typePower Steering Pressure Hose ReplacementEstimate$246.01Shop/Dealer Price$289.66 - $391.32
2004 Ford F-150 HeritageV8-4.6LService typePower Steering Pressure Hose ReplacementEstimate$246.01Shop/Dealer Price$289.63 - $391.27
Show example Ford F-150 Heritage Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(26)

Rating Summary
25
1
0
0
0
25
1
0
0
0

Jonathan

22 years of experience
304 reviews
Jonathan
22 years of experience
Ford F-150 Heritage V8-4.6L - Brake Rotor/Disc Replacement (Front) - Denver, Colorado
Jonathan was a great mechanic he did a really good job on my F-150 was way above my expectations I would recommend anybody who wants to get their car repaired this would be the company and the gentlemen to do it

Christopher

12 years of experience
36 reviews
Christopher
12 years of experience
Ford F-150 Heritage V6-4.2L - Fuel Pump - Longwood, Florida
Very pleasant guy, got the job done quickly! Would highly recommend~

Demond

17 years of experience
13 reviews
Demond
17 years of experience
Ford F-150 Heritage V6-4.2L - Oil Change - Grand Prairie, Texas
Demond arrived shortlly before the scheduled time which was great! He did a wonderful job!

Howard

30 years of experience
92 reviews
Howard
30 years of experience
Ford F-150 Heritage V8-4.6L - Starter - Lithonia, Georgia
Howard was very helpful

Excellent Rating

(26)

Rating Summary
25
1
0
0
0
25
1
0
0
0
Number of Ford F-150 Heritage services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Scion iQ
The The 2012 Scion iQ delivers the type of driving experience you would expect from a microcar. The higher fuel economy coupled with a tight turning radius provides an excellent vehicle for those who do a lot of city driving...
How to Tell if You Need Car Gap Insurance
Car gap insurance is also known as loan-lease payoff coverage, because it pays the difference between the value and outstanding balance of your car.
Ridesharing Vs. Renting a Car
Business trip or vacation, transportation is necessary. Should you choose rideshare services or rent a car?

How do you play a CD?

Your car’s audio system is able to play a wide range of discs, including CDs, CD-Rs and more. If you’re not sure how to load a disc or listen to it, here’s what you need to know: Turn on the...

Transmission cooling hose keeps blowing off of radiator

The retainer clip needs to be replaced. It is not able to secure the line under high temperature and pressures. Get the part from the dealer and have the line checked for any problems, and replace as needed. If the...

My van was missing and rough idling then I turned it off one day and the next day it starts then dies and some times it won't start

Hello, thanks for writing in about your 2001 Dodge Caravan. For certain, given your mileage and codes for these 2 components, replacing these 2 sensors is the minimum. Cleaning the idle air control valve, throttle body (https://www.yourmechanic.com/services/clean-throttle-body), and PCV valve...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com