Ford Explorer Sport Trac Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Ford Explorer Sport Trac Valve Cover Gasket Replacement is $485 with $149 for parts and $336 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Ford Explorer Sport TracV6-4.0LService typeValve Cover Gasket ReplacementEstimate$772.48Shop/Dealer Price$860.15 - $1098.86
2008 Ford Explorer Sport TracV6-4.0LService typeValve Cover Gasket ReplacementEstimate$891.44Shop/Dealer Price$975.64 - $1211.76
2009 Ford Explorer Sport TracV8-4.6LService typeValve Cover Gasket ReplacementEstimate$688.44Shop/Dealer Price$777.41 - $1034.30
2001 Ford Explorer Sport TracV6-4.0LService typeValve Cover Gasket ReplacementEstimate$722.31Shop/Dealer Price$802.43 - $1030.68
2007 Ford Explorer Sport TracV8-4.6LService typeValve Cover Gasket ReplacementEstimate$688.44Shop/Dealer Price$780.95 - $1040.49
2002 Ford Explorer Sport TracV6-4.0LService typeValve Cover Gasket ReplacementEstimate$745.45Shop/Dealer Price$828.32 - $1063.42
2008 Ford Explorer Sport TracV8-4.6LService typeValve Cover Gasket ReplacementEstimate$688.44Shop/Dealer Price$777.45 - $1034.37
2007 Ford Explorer Sport TracV6-4.0LService typeValve Cover Gasket ReplacementEstimate$891.44Shop/Dealer Price$975.74 - $1211.92
Show example Ford Explorer Sport Trac Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0

James

25 years of experience
835 reviews
James
25 years of experience
Explorer Sport Trac 2007 - Valve Cover Gasket - Winter Garden, FL
James was professional, friendly, courteous and approachable. He is not only technically astute but also personable. I will choose James again.

Chris

13 years of experience
490 reviews
Chris
13 years of experience
Explorer Sport Trac 2010 - Valve Cover Gasket - Richmond, TX
Very impressed at the quality and speed Chris was able to repair my vehicle. I plan to request Chris next time I need service.

Michael

35 years of experience
28 reviews
Michael
35 years of experience
Explorer Sport Trac 2003 - Control Arm Assembly - San Antonio, TX
Really great, will schedule with him again.

Corey

15 years of experience
184 reviews
Corey
15 years of experience
Explorer Sport Trac 2003 - Thermostat Housing - Charlotte, NC
Corey came out and changed my thermostat housing in no time at all. I am very pleased with his work, professionalism, honesty and attention to detail.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0
Number of Ford Explorer Sport Trac Valve Cover Gasket Replacement services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

P0571 OBD-II Trouble Code: Cruise Control/Brake Switch A Circuit Malfunction
P0571 means there is a problem with the switch that that deactivates the cruise control system which causes the cruise control to not function.
How to Get Paint Off Your Car
Removing car paint is necessary when repainting or restoring an older car. If you’re asking a professional to repaint or restore your car, then you won’t need to worry about doing it yourself (https://www.yourmechanic.com/article/how-to-paint-a-car-yourself). However, if you’re working on your...
How to Put Sheepskin Covers on Your Seats
Sometimes Sometimes the seats in your car just aren’t quite comfortable. In the winter (https://www.yourmechanic.com/article/how-do-i-prepare-my-car-for-winter), the seats can be too cold, causing you to feel a chill right through your winter clothing. In the summer (https://www.yourmechanic.com/article/how-do-i-prepare-my-car-for-summer), the seat surface can...

Car making clunking, grinding noise 2006 Scion xB

Hi there - your symptoms suggest a problem with the transmission since they only appear when the vehicle is in gear (https://www.yourmechanic.com/article/how-to-troubleshoot-a-car-that-makes-a-whining-noise-when-in-gear-by-john-hege). First task is to check the transmission fluid - you are looking for "clear" red fluid and no...

Why is my car not accelerating Normal

The metallic noise could arise from a variety of sources; anything from the brakes to the engine. The origin could definitely be pinpointed by a certified mechanic during a vehicle noise diagnostic (https://www.yourmechanic.com/services/car-is-making-a-noise-inspection). Slow acceleration (https://www.yourmechanic.com/services/car-is-slow-to-accelerate-inspection) has a variety of...

My car ran fine yesterday. I tried to start it today and lights came on but nothing. About 20 mins later it started right up. I have a 2003 chevy impala. I have a new starter and battery is about 3 years old. What do I need to do so I don't have this problem anymore

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com