Ford Explorer Sport Trac Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Ford Explorer Sport Trac Car Thermostat Replacement is $166 with $71 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Ford Explorer Sport TracV8-4.6LService typeCar Thermostat ReplacementEstimate$257.25Shop/Dealer Price$302.82 - $417.01
2005 Ford Explorer Sport TracV6-4.0LService typeCar Thermostat ReplacementEstimate$257.75Shop/Dealer Price$308.46 - $438.04
2007 Ford Explorer Sport TracV8-4.6LService typeCar Thermostat ReplacementEstimate$237.25Shop/Dealer Price$282.83 - $397.04
2008 Ford Explorer Sport TracV6-4.0LService typeCar Thermostat ReplacementEstimate$266.47Shop/Dealer Price$319.34 - $455.44
2001 Ford Explorer Sport TracV6-4.0LService typeCar Thermostat ReplacementEstimate$257.75Shop/Dealer Price$308.47 - $438.07
2010 Ford Explorer Sport TracV6-4.0LService typeCar Thermostat ReplacementEstimate$266.47Shop/Dealer Price$319.36 - $455.48
2009 Ford Explorer Sport TracV8-4.6LService typeCar Thermostat ReplacementEstimate$242.25Shop/Dealer Price$287.70 - $401.80
2004 Ford Explorer Sport TracV6-4.0LService typeCar Thermostat ReplacementEstimate$271.47Shop/Dealer Price$324.59 - $460.90
Show example Ford Explorer Sport Trac Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of Ford Explorer Sport Trac Car Thermostat Replacement services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

2012 Ford Mustang vs. 2012 Dodge Charger: Which One Should I Buy?
Technically these two vehicles have wildly different classifications: compact for the Ford Mustang and large car for the Dodge Charger. However, who would consider either one anything other than a muscle car? These cars are meant for speed, fun, and...
P0321 OBD-II Trouble Code: Ignition/Distributor Engine Speed Input Circuit Range/Performance
P0321 P0321 code definition Ignition/Distributor Engine Speed Input Circuit Range/Performance What the P0321 code means P0321 is an OBD-II generic code that the engine control module (ECM) detected the engine speed input sensor circuit out of range or its performance...
How to Budget to Buy a New Car
Saving money for a new car or a used car (https://www.yourmechanic.com/article/what-are-the-pros-and-cons-of-buying-a-new-or-a-used-vehicle) that’s new to you doesn’t have to be a source of stress. With the proper planning, you can simplify the process without making a huge financial sacrifice all at...

Brake lights staying on

The brake light switch has a small rubber bumper that pushes in on it to keep the light off. The rubber bumper falls apart with age and then the brake lights stay on. The bumper on the brake pedal linkage...

Stalling at stop lights

Hello there, a few different faults could be causing your 2000 Plymouth Breeze to stall. The most common would be the fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement), MAP sensor (https://www.yourmechanic.com/services/manifold-absolute-pressure-sensor-map-sensor-replacement), fuel filter (https://www.yourmechanic.com/services/fuel-filter-replacement), battery (https://www.yourmechanic.com/services/battery-replacement), alternator (https://www.yourmechanic.com/services/alternator-replacement), battery cable (https://www.yourmechanic.com/services/battery-cable-replacement), or a wiring...

Hi.I have a 2006 Dodge Magnum. My ESP light came on and my car won't go over 35 mph.

Hi there. The Electronic Stability Program light is on for the one or more of the wheel speed sensors are picking up a wheel that is spinning too fast. If the rear wheels spun out, then the system will become...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com