Ford Expedition Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Ford Expedition Wheel Bearings Replacement is $121 with $26 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Ford ExpeditionV8-5.4LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$802.45Shop/Dealer Price$984.32 - $1507.41
2010 Ford ExpeditionV8-5.4LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$638.59Shop/Dealer Price$784.51 - $1199.72
1999 Ford ExpeditionV8-4.6LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$247.33Shop/Dealer Price$291.31 - $393.96
2007 Ford ExpeditionV8-5.4LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$682.95Shop/Dealer Price$839.94 - $1288.40
1998 Ford ExpeditionV8-4.6LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$247.33Shop/Dealer Price$291.33 - $393.99
2005 Ford ExpeditionV8-5.4LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$807.45Shop/Dealer Price$995.58 - $1537.44
1998 Ford ExpeditionV8-4.6LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$152.41Shop/Dealer Price$175.40 - $222.12
2001 Ford ExpeditionV8-4.6LService typeWheel Bearings - Driver Side Front ReplacementEstimate$152.41Shop/Dealer Price$175.77 - $222.78
Show example Ford Expedition Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Walter

43 years of experience
238 reviews
Walter
43 years of experience
Expedition 2005 - Wheel Bearings - Owasso, OK
Walter was great and worked with us!

Nezar

22 years of experience
15 reviews
Nezar
22 years of experience
Expedition 2014 - Brake Pads - Fort Lauderdale, FL
Nezarwas early worked fast did a great job highly recomend him

Juan

10 years of experience
47 reviews
Juan
10 years of experience
Expedition 2004 - Cabin Air Filter - Fairfield, CA
very knowledgeable and professional.

Juan

10 years of experience
47 reviews
Juan
10 years of experience
Expedition 2004 - Tune-up - Fairfield, CA
very knowledgeable and professional.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Ford Expedition Wheel Bearings Replacement services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How Long Does a Headlight Closure Relay Last?
With With all of the different relays that are on a car, it can feel like a full-time job keeping up with them all. One of the most important safety features that a car has is properly working headlights. In...
The Guide to Legal Car Modifications in Massachusetts
ARENA Creative / Shutterstock.com Whether you live Massachusetts or are moving to the area, you need to know about the vehicle modification laws to make sure your car or truck is street legal. From sounds to classic...
Rules of the Road For Kentucky Drivers
If If you drive, you are probably very familiar with the laws that you must follow in your own state. However, different states have varying road rules, and that means you need to be familiar with them if you plan...

I cannot move my car in reverse when on a hill, nothing happens when I press the gas pedal

The Nissan Rogue is equipped with a Continuously Variable Transmission. They are known to experience issues such as not moving in any gear when the gas pedal is applied, even floored. It may be slipping due to internal issues with...

I was driving and all of a sudden car had no response from gas pedal, then kicked back on for a second then no response. I was only going as fast as putting car in drive and car moving forward at a crawl speed for about 1/2 mile. I kept stepping on pedal then car worked fine until I got home. No check engine light came on.

Hi only the drivers window is working. The 3 passenger widows are not. I have checked all the fuses

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com