Ford Escort Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Ford Escort Valve Cover Gasket Replacement is $166 with $26 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Ford EscortL4-1.9LService typeValve Cover Gasket ReplacementEstimate$270.28Shop/Dealer Price$302.70 - $391.86
1994 Ford EscortL4-1.9LService typeValve Cover Gasket ReplacementEstimate$261.27Shop/Dealer Price$291.92 - $379.76
1998 Ford EscortL4-2.0LService typeValve Cover Gasket ReplacementEstimate$268.15Shop/Dealer Price$300.55 - $393.56
1996 Ford EscortL4-1.8LService typeValve Cover Gasket ReplacementEstimate$252.05Shop/Dealer Price$280.42 - $361.36
2003 Ford EscortL4-2.0LService typeValve Cover Gasket ReplacementEstimate$268.15Shop/Dealer Price$302.02 - $396.14
1991 Ford EscortL4-1.9LService typeValve Cover Gasket ReplacementEstimate$261.27Shop/Dealer Price$292.09 - $380.05
1990 Ford EscortL4-1.9LService typeValve Cover Gasket ReplacementEstimate$229.01Shop/Dealer Price$251.64 - $315.31
1996 Ford EscortL4-1.9LService typeValve Cover Gasket ReplacementEstimate$261.27Shop/Dealer Price$291.95 - $379.80
Show example Ford Escort Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Ford Escort Valve Cover Gasket Replacement services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

P2627 OBD-II Trouble Code: O2 Sensor Pumping Current Trim Circuit Low Bank 1 Sensor 1
P2627 means there is a problem with the oxygen sensor for bank 1 due to malfunctioning sensor, faulty wiring, blown fuse, or leaking exhaust.
P2266 OBD-II Trouble Code: Low Voltage in Water in Fuel Sensor
P2266 P2266 code definition The P2266 code is set when low voltage is detected in the WIF (Water in Fuel) Sensor circuit at the Engine Control Module (ECM). Other fuel system codes may set along with P2266. What the P2266...
How Long Does a Clutch Cable Last?
The The clutch cable is an essential part of your vehicle’s clutch system. The clutch is a device that engages and disengages the power transmission, and allows you to shift gears while you are driving. Manual transmission vehicles have a...

How do I check the oil?

Checking the oil is easy, and should be done with regularity, so that you’re never driving with unsafe levels of motor oil. Here’s how to check your oil. Wait about five minutes after driving your vehicle. You want the oil...

My car today was pulling back when I was putting gas, what can be the cause? I recently got a new altantor and belt on Thursday.

If you had the battery disconnected it may take a few days of driving for the computer to reset and may have different running issues until it will drive normal again. If you get any kind of check engine light...

Should i change my cooler water each year ?

If it's the engine coolant that you are asking about, every other year should be quite sufficient. When you decide to have that done contact Your Mechanic. They can send a technician to your home or office to replace your...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com