Ford E-150 Club Wagon Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Ford E-150 Club Wagon Power Steering Pressure Hose Replacement is $250 with $68 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Ford E-150 Club WagonV8-5.4LService typePower Steering Pressure Hose ReplacementEstimate$338.28Shop/Dealer Price$377.16 - $483.25
2005 Ford E-150 Club WagonV8-4.6LService typePower Steering Pressure Hose ReplacementEstimate$326.57Shop/Dealer Price$363.15 - $467.52
2003 Ford E-150 Club WagonV8-5.4LService typePower Steering Pressure Hose ReplacementEstimate$326.57Shop/Dealer Price$363.18 - $467.58
2005 Ford E-150 Club WagonV8-5.4LService typePower Steering Pressure Hose ReplacementEstimate$326.57Shop/Dealer Price$363.18 - $467.57
2004 Ford E-150 Club WagonV8-4.6LService typePower Steering Pressure Hose ReplacementEstimate$326.57Shop/Dealer Price$365.09 - $470.93
2003 Ford E-150 Club WagonV6-4.2LService typePower Steering Pressure Hose ReplacementEstimate$326.57Shop/Dealer Price$363.36 - $467.89
2003 Ford E-150 Club WagonV8-4.6LService typePower Steering Pressure Hose ReplacementEstimate$326.57Shop/Dealer Price$363.20 - $467.61
Show example Ford E-150 Club Wagon Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(9)

Rating Summary
7
1
1
0
0
7
1
1
0
0

Abdoulie

5 years of experience
29 reviews
Abdoulie
5 years of experience
Ford E-150 Club Wagon V8-5.4L - Alternator - Southfield, Michigan
Abdoulie did a great job while he was repairing my vehicle, despite the fact that the company which sent him, did not provide him with the correct part. He was very capable and personable, two admirable qualities in a worker.

Latora

15 years of experience
9 reviews
Latora
15 years of experience
Ford E-150 Club Wagon V8-5.4L - Brake light is not working Inspection - Houston, Texas
he was totally awesome i will recommend him to everyone

Andrew

12 years of experience
962 reviews
Andrew
12 years of experience
Ford E-150 Club Wagon V8-5.4L - Car Battery Terminal Ends Replacement - Kansas City, Missouri
Andrew arrived as scheduled and completed the work very efficiently.

Chris

17 years of experience
47 reviews
Chris
17 years of experience
Ford E-150 Club Wagon V8-5.4L - Spark Plugs - San Leandro, California
Very little communication

Excellent Rating

(9)

Rating Summary
7
1
1
0
0
7
1
1
0
0
Number of Ford E-150 Club Wagon services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

How to Register a Car in Florida
All All vehicles must be registered through Florida’s Department of Highway Safety and Motor Vehicles (DHSMV) or through eTags, which is an online registration system approved by the state. If you are new to Florida, you have 10 days to...
P0311 OBD-II Trouble Code: Cylinder 11 Misfire Detected
P0311 means that the powertrain control module (PCM) detects a misfire in cylinder 11, often due to a faulty spark plug or clogged fuel injector.
P0570 OBD-II Trouble Code: Cruise Control Accel Malfunction
P0570 code means that the PCM has identified a malfunction with your vehicle’s cruise control often due to defective cruise control or blown fuses.

Having squeaks when driving over bumps and pot holes

There are a lot of different suspension components that can make the noise you are hearing and here is some of them to check: front and rear sway bar bushings and link arms. Shocks and shock bushings, front track bar...

Speedometer stopped working, how do I repair it? 2003 Audi A6

Hello - most likely the speedometer sensor (https://www.yourmechanic.com/article/how-long-does-a-speedometer-sensor-last) has failed, or the wiring to it has become disconnected. Check that first. It's also possible that the speedometer sensor drive gear has failed (small plastic gear), or the instrument panel speedo...

The headlights flicker.

The most likely cause for lights flickering would be a bad or loose ground. Make sure battery terminals are tight. Make sure the battery and other engine grounds are tight. Check the connector and harness at each headlight to be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com