Ford E-150 Club Wagon Oxygen Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Oxygen Sensor Replacement Service

How much does a Oxygen Sensor Replacement cost?

On average, the cost for a Ford E-150 Club Wagon Oxygen Sensor Replacement is $191 with $96 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Ford E-150 Club WagonV8-5.4LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$306.11Shop/Dealer Price$363.89 - $514.73
2003 Ford E-150 Club WagonV8-4.6LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$343.59Shop/Dealer Price$410.26 - $578.73
2005 Ford E-150 Club WagonV8-5.4LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$449.79Shop/Dealer Price$543.01 - $791.13
2004 Ford E-150 Club WagonV8-4.6LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$286.11Shop/Dealer Price$343.89 - $494.72
2004 Ford E-150 Club WagonV8-4.6LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$343.59Shop/Dealer Price$410.28 - $578.77
2005 Ford E-150 Club WagonV8-4.6LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$449.79Shop/Dealer Price$543.01 - $791.13
2005 Ford E-150 Club WagonV8-5.4LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$291.11Shop/Dealer Price$348.77 - $499.52
2003 Ford E-150 Club WagonV6-4.2LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$342.91Shop/Dealer Price$413.89 - $603.78
Show example Ford E-150 Club Wagon Oxygen Sensor Replacement prices

What is the Oxygen Sensor all about?

With each new model year, manufacturers are adding more oxygen sensors to better manage engine operation. Some high performance engines have an oxygen sensor for each cylinder as well as one for the rear of each catalytic convertor. The sensors are located either underneath the hood or underneath the car. The oxygen sensors are connected (screwed) to the exhaust pipe, either in front or back of the catalytic converter. The front (upstream) sensors measure the amount of oxygen in the exhaust system. The purpose of the front oxygen sensor(s) is to measure how rich or lean the gases are as the gases exit the combustion chamber. Depending upon whether the exhaust gas is lean (high in oxygen content) or rich (low in oxygen content), the amount of fuel entering the engine is adjusted by the engine management computer to try and maintain an ideal mixture that produces the lowest emissions output from the catalytic convertor.

Rear (downstream) sensors are located behind the catalytic converter. The purpose of the rear oxygen sensor(s) is to monitor the oxygen content of the exhaust gases leaving the catalytic convertor.

If one or more of the oxygen sensors are faulty, your car may not pass the emissions test. If you drive your car with a faulty oxygen sensor, you may get poor gas mileage and it can damage the catalytic converter.

Oxygen Sensor-MATROX-1

When replacing the oxygen sensor remember:

  • Many oxygen sensors are damaged by leaking oil or coolant. If that is the case, the cause of that leak needs to be identified and repaired, or else the replacement oxygen sensor will be damaged as well.
  • New vehicles require specific oxygen sensors, and not the universal sensors that were common prior to 1996.

How it's done:

  • Scan the computer in the car for codes.
  • Inspect for vacuum leaks and holes in the exhaust system.
  • Remove and replace the oxygen sensor if it is bad.
  • Check electrical connections.
  • Check for proper operation of oxygen sensors.
  • Clear diagnostic codes.
  • Test drive car.

Our recommendation:

Keep up with the tune-ups. If check engine light is on, don't drive the car too long without getting it inspected. If check engine light is flashing, pull over and get the car towed to avoid costly repairs. Ask the mechanic to inspect the vacuum hoses and leaks in the exhaust system. If the vacuum hose or exhaust system is leaking, it will display an oxygen sensor fault code. Replacing an oxygen sensor may not fix the problem.

What common symptoms indicate you may need to replace the Oxygen Sensor?

  • Check Engine light is on.
  • Car is getting poor gas mileage.
  • Emission test fails.

How important is replacing the oxygen sensor?

Your vehicle has multiple oxygen sensors, and they all help the car run optimally. The front sensors measure how much oxygen is in the exhaust stream to measure how rich or lean the gases leaving the gas chamber are. The rear sensors measure the oxygen content of the gases as they leave the catalytic converter. The oxygen sensors then relay this information to your vehicle’s electronic control unit, so that it can adjust as necessary. Because cars depend on an ideal fuel-to-air ratio to function optimally, the oxygen sensors are leaned on for engine performance. When your oxygen sensors fail your car will run less smoothly, get worse mileage, and have worse emissions.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(9)

Rating Summary
7
1
1
0
0
7
1
1
0
0

Andrew

11 years of experience
841 reviews
Andrew
11 years of experience
Ford E-150 Club Wagon V8-5.4L - Oil Change - Kansas City, Missouri
Andy completed the work very efficiently and is very very personable.

Rocco

22 years of experience
302 reviews
Rocco
22 years of experience
Ford E-150 Club Wagon V8-5.4L - Inertia Switch - Riverside, California

Chris

16 years of experience
47 reviews
Chris
16 years of experience
Ford E-150 Club Wagon V8-5.4L - Spark Plugs - San Leandro, California
Very little communication

Latora

14 years of experience
9 reviews
Latora
14 years of experience
Ford E-150 Club Wagon V8-5.4L - Brake light is not working Inspection - Houston, Texas
he was totally awesome i will recommend him to everyone

Excellent Rating

(9)

Rating Summary
7
1
1
0
0
7
1
1
0
0
Number of Ford E-150 Club Wagon services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Low Oil Level Sensor
Common signs include inaccurate oil readings, the Oil Light coming on for no reason, the car not starting, and the Check Engine Light coming on.
How Long Does a Camshaft Position Sensor Last?
Most Most people get in their car and crank it without ever thinking about what it takes to make this process happen. A variety of different sensors and ignition parts will have to work in conjunction in order for a...
How to Replace an Air Cleaner Temperature Sensor
The air cleaner temperature sensor allows the computer to adjust engine timing and air/fuel ratio. A rough idle or "engine lag" are signs of failure.

Transmission slipping.

There are a multitude of reasons why and automatic transmission will slip. It is possible that a bad speed sensor (https://www.yourmechanic.com/services/transmission-speed-sensor-replacement) could cause the transmission to slip. However, it is also possible that a slipping transmission can cause sensor codes...

No spark on cylinder 1 and 4

Before considering the replacement of the PCM, return the coil pack to the parts store and ask for it to be tested. It is not uncommon to receive a faulted new part. Spark has to travel from the coil (https://www.yourmechanic.com/services/ignition-coil-replacement),...

P0300, P0303, P1313, and P1314 codes are read on the scanner.

Hi there. The codes p0300 (https://www.yourmechanic.com/article/p0300-obd-ii-trouble-code-random-multiple-cylinder-misfire-detected-by-jamahl-walker) and p0303 (https://www.yourmechanic.com/article/p0303-obd-ii-trouble-code-cylinder-3-misfire-detected-by-spencer-clayton_2) are for the engine having a misfire. P0300 is for a random misfire where p0303 says that cylinder 3 had a misfire all the time. The code p1314 (http://obdii.pro/en/code/P1313) means that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com