Ford Country Squire Oxygen Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(200)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(200)

Oxygen Sensor Replacement Service

How much does a Oxygen Sensor Replacement cost?

On average, the cost for a Ford Country Squire Oxygen Sensor Replacement is $209 with $69 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Ford Country SquireV8-5.0LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$293.56Shop/Dealer Price$331.80 - $438.42
1991 Ford Country SquireV8-5.0LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$284.55Shop/Dealer Price$321.02 - $426.32
1990 Ford Country SquireV8-5.0LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$284.55Shop/Dealer Price$321.05 - $426.36
1991 Ford Country SquireV8-5.0LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$284.55Shop/Dealer Price$321.05 - $426.36
Show example Ford Country Squire Oxygen Sensor Replacement prices

What is the Oxygen Sensor all about?

With each new model year, manufacturers are adding more oxygen sensors to better manage engine operation. Some high performance engines have an oxygen sensor for each cylinder as well as one for the rear of each catalytic convertor. The sensors are located either underneath the hood or underneath the car. The oxygen sensors are connected (screwed) to the exhaust pipe, either in front or back of the catalytic converter. The front (upstream) sensors measure the amount of oxygen in the exhaust system. The purpose of the front oxygen sensor(s) is to measure how rich or lean the gases are as the gases exit the combustion chamber. Depending upon whether the exhaust gas is lean (high in oxygen content) or rich (low in oxygen content), the amount of fuel entering the engine is adjusted by the engine management computer to try and maintain an ideal mixture that produces the lowest emissions output from the catalytic convertor.

Rear (downstream) sensors are located behind the catalytic converter. The purpose of the rear oxygen sensor(s) is to monitor the oxygen content of the exhaust gases leaving the catalytic convertor.

If one or more of the oxygen sensors are faulty, your car may not pass the emissions test. If you drive your car with a faulty oxygen sensor, you may get poor gas mileage and it can damage the catalytic converter.

Oxygen Sensor-MATROX-1

When replacing the oxygen sensor remember:

  • Many oxygen sensors are damaged by leaking oil or coolant. If that is the case, the cause of that leak needs to be identified and repaired, or else the replacement oxygen sensor will be damaged as well.
  • New vehicles require specific oxygen sensors, and not the universal sensors that were common prior to 1996.

How it's done:

  • Scan the computer in the car for codes.
  • Inspect for vacuum leaks and holes in the exhaust system.
  • Remove and replace the oxygen sensor if it is bad.
  • Check electrical connections.
  • Check for proper operation of oxygen sensors.
  • Clear diagnostic codes.
  • Test drive car.

Our recommendation:

Keep up with the tune-ups. If check engine light is on, don't drive the car too long without getting it inspected. If check engine light is flashing, pull over and get the car towed to avoid costly repairs. Ask the mechanic to inspect the vacuum hoses and leaks in the exhaust system. If the vacuum hose or exhaust system is leaking, it will display an oxygen sensor fault code. Replacing an oxygen sensor may not fix the problem.

What common symptoms indicate you may need to replace the Oxygen Sensor?

  • Check Engine light is on.
  • Car is getting poor gas mileage.
  • Emission test fails.

How important is replacing the oxygen sensor?

Your vehicle has multiple oxygen sensors, and they all help the car run optimally. The front sensors measure how much oxygen is in the exhaust stream to measure how rich or lean the gases leaving the gas chamber are. The rear sensors measure the oxygen content of the gases as they leave the catalytic converter. The oxygen sensors then relay this information to your vehicle’s electronic control unit, so that it can adjust as necessary. Because cars depend on an ideal fuel-to-air ratio to function optimally, the oxygen sensors are leaned on for engine performance. When your oxygen sensors fail your car will run less smoothly, get worse mileage, and have worse emissions.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(200)

Rating Summary
191
6
0
2
1
191
6
0
2
1

Dameron

18 years of experience
273 reviews
Dameron
18 years of experience
Ford Expedition V8-5.4L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Indianapolis, Indiana
He was patient and knowledgeable!

Paul

26 years of experience
280 reviews
Paul
26 years of experience
Ford Expedition V8-5.4L - Oxygen Sensor Replacement (Front/Upper/Upstream) - North Las Vegas, Nevada
He thought he might not be able to get it done and got it done.

Stacy

25 years of experience
511 reviews
Stacy
25 years of experience
Ford Fusion L4-2.5L - Oxygen Sensor Replacement (Front/Upper/Upstream, Rear/Lower/Downstream) - Jonesboro, Georgia
Stacy was great. When far and beyond to fix my car

Thomas

13 years of experience
227 reviews
Thomas
13 years of experience
Ford Explorer V6-4.0L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Crowley, Texas
Very friendly and knowledgable. Did a great job.

Excellent Rating

(200)

Rating Summary
191
6
0
2
1
191
6
0
2
1
Number of Ford Oxygen Sensor Replacement services completed
2200+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing EGR Pressure Feedback Sensor
Common signs include engine performance issues like rough idle and decrease in power, failing an emissions test, and the Check Engine Light coming on.
What Sensors Make the ABS Work?
When When we are discussing ABS systems it is good to note the year and make of your vehicle because ABS systems have evolved quite a bit over the years, but you also have to know how the ABS system...
How Long Does a Speed Sensor Last?
Today’s Today’s cars are equipped with a very wide range of sensors. Yours has a mass airflow sensor, at least one oxygen sensor, and many others. The vehicle speed sensor (VSS) is usually located on the transmission’s output shaft (although...

How can I test an abs sensor to make sure its good

Depending on the vehicle you can do an ohms test if you know the correct reading you should get (about 25 ohms on some vehicles). However, the best method for checking the ABS speed sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-abs-speed-sensor) is to use a...

My car's gas pedal goes out and the car won't drive anymore if my RPM reaches the number 3 on the gauge.

Hello, I would start by extracting the problem codes from engine management and the transmission as well. You don't mention it, but surely the Check Engine light is on at this point. These codes will help determine a strategy for...

06 mazda 3 car runs and idles but when I give it gas it will not accelerate

If you have a check engine light on and there is a major problem in the computer system or one of the major sensors then the computer will limit throttle opening. You should have the system scanned for codes and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com