Ford Bronco II Car Fuse Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(25)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(25)

Car Fuse Replacement Service

How much does a Car Fuse Replacement cost?

On average, the cost for a Ford Bronco II Car Fuse Replacement is $99 with $4 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1985 Ford Bronco IIL4-2.3L Turbo DieselService typeCar Fuse ReplacementEstimate$124.55Shop/Dealer Price$136.94 - $151.61
1987 Ford Bronco IIV6-2.9LService typeCar Fuse ReplacementEstimate$103.87Shop/Dealer Price$116.11 - $130.28
1986 Ford Bronco IIL4-2.3L Turbo DieselService typeCar Fuse ReplacementEstimate$104.55Shop/Dealer Price$116.96 - $131.64
1990 Ford Bronco IIV6-2.9LService typeCar Fuse ReplacementEstimate$103.83Shop/Dealer Price$116.04 - $130.16
1984 Ford Bronco IIV6-2.8LService typeCar Fuse ReplacementEstimate$103.87Shop/Dealer Price$116.12 - $130.31
1986 Ford Bronco IIV6-2.9LService typeCar Fuse ReplacementEstimate$103.87Shop/Dealer Price$116.11 - $130.28
1989 Ford Bronco IIV6-2.9LService typeCar Fuse ReplacementEstimate$108.83Shop/Dealer Price$120.92 - $134.96
1988 Ford Bronco IIV6-2.9LService typeCar Fuse ReplacementEstimate$108.87Shop/Dealer Price$121.34 - $135.70
Show example Ford Bronco II Car Fuse Replacement prices

What is the Fuse all about?

Fuses, found in the fuse box, are low-resistance resistor devices that protect the circuits in the car from excessive current. Fuses are made to blow if the circuit gets more current than it is supposed to, protecting the circuit from the high current flow. There can be multiple fuses in multiple locations. The fuses should always be replaced with the specified fuse. All fuses come with the “AMP” value written on top of it. The fuse box will specify the correct value of fuse required.

Fuses-MATROX-1

Keep in mind:

If a fuse blows, is replaced, and then blows again, it indicates a problem with the electrical system. Something is causing the overload. Be sure to have the car inspected.

How it's done:

  • Test fuses using a test lamp.
  • Remove and replace the faulty fuse.
  • Inspect fuse block for corrosion or melted holders.

Our recommendation:

Any time an electrical component of your vehicle stops working, you should schedule an inspection. There’s no way to perform regular maintenance on fuses, but they’re a straightforward and affordable repair when you notice that one is blown.

What common symptoms indicate you may need to replace the Fuse?

  • One or more electrical components are not working (lights, radio, etc.)

How important is this service?

Fuses are resistors that send power to the electrical components of your car. Fuses receive a large amount of current, and lessen that amount of current before it is sent to each electrical part, so that the electrical components aren’t damaged by excessive power. When a fuse blows, electrical power will be not flow through it, and certain parts of your car will stop working. A blown fuse is unlikely to cause any damage to your vehicle, but the electrical components that rely on that fuse won’t resume working until the fuse is replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(25)

Rating Summary
22
2
0
0
1
22
2
0
0
1

Christopher

12 years of experience
142 reviews
Christopher
12 years of experience
Ford Bronco II V6-2.9L - Battery is dead - Charlotte, North Carolina
Arrived early, very friendly & helpful. Was unable to determine cause of battery drain due to battery being completely dead (my fault), however; he was able to tell me what steps to take moving forwards in order to determine the problem.

Ramon

20 years of experience
166 reviews
Ramon
20 years of experience
Ford Bronco II V6-2.9L - Steering Rack/Gearbox - Tucson, Arizona
Great job, good info and knowledgeable. Knows his business.

Ramon

20 years of experience
166 reviews
Ramon
20 years of experience
Ford Bronco II V6-2.9L - Brakes, Steering and Suspension Inspection - Tucson, Arizona
Great info, very experienced. Good job

Scott

34 years of experience
548 reviews
Scott
34 years of experience
Ford Bronco II V6-2.9L - Starter - Denver, Colorado
Scott did a great job I’d recommend him to anyone.

Excellent Rating

(25)

Rating Summary
22
2
0
0
1
22
2
0
0
1
Number of Ford Bronco II services completed
275+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Bumper Protector
Whether Whether you call it a bumper protector or a bumper guard, these automotive accessories offer important protection for your vehicle’s bumpers. They help prevent dings and bumps while you’re parked in a parking lot, while other designs are made...
P3444 OB2-11 Trouble Code: Cylinder 6 Deactivation/Intake Valve Control Circuit High
What What the P3444 code means This code indicates that there is a problem with your intake valve on cylinder number 6. Your vehicle’s control module identifies that the measured values from the manifold absolute pressure (MAP) sensor, the throttle...
B1326 OBD-II Trouble Code: Door Ajar Lamp Circuit Short to Ground
B1326 means there is a circuit error with the door ajar lamp, likely due to a defective door ajar switch, defective door switch, or short circuit.

Truck is not getting fuel until holding the ignition in for a few seconds.

You may very well be on the right track with this and you should check the control module to be sure. You may also want to check the fuel pressure regulator (https://www.yourmechanic.com/services/fuel-pressure-regulator-replacement) as well to be sure you are getting...

Jerking reaction when accelerating

If your car is producing a jerking reaction as you press the gas pedal when accelerating, you may have a dirty of faulty mass air flow sensor. The mass air flow sensor is a unit in the intake system that...

Rear shock creaks when turning steering wheel.

If the shock has worn out bushings or the U bracket was overtightened it may be hitting metal to metal and U bracket is rubbing metal of shock. Check bracket and shock bushings.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com