Ford 300 Clean and Repack Wheel Bearing at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Clean and Repack Wheel Bearing Service

How much does a Clean and Repack Wheel Bearing cost?

On average, the cost for a Ford 300 Clean and Repack Wheel Bearing is $152 with $0 for parts and $152 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1963 Ford 300L6-3.6LService typeClean and Repack Wheel BearingEstimate$183.98Shop/Dealer Price$199.99 - $211.99
1963 Ford 300V8-4.7LService typeClean and Repack Wheel BearingEstimate$151.98Shop/Dealer Price$168.01 - $180.04
1963 Ford 300V8-4.3LService typeClean and Repack Wheel BearingEstimate$151.98Shop/Dealer Price$168.01 - $180.03
1963 Ford 300V8-6.4LService typeClean and Repack Wheel BearingEstimate$151.98Shop/Dealer Price$167.98 - $179.97
1963 Ford 300V8-6.6LService typeClean and Repack Wheel BearingEstimate$151.98Shop/Dealer Price$168.04 - $180.08
1963 Ford 300V8-7.0LService typeClean and Repack Wheel BearingEstimate$151.98Shop/Dealer Price$168.01 - $180.03
1963 Ford 300V8-5.8LService typeClean and Repack Wheel BearingEstimate$159.98Shop/Dealer Price$175.79 - $187.65
1963 Ford 300L6-3.3LService typeClean and Repack Wheel BearingEstimate$159.98Shop/Dealer Price$176.39 - $188.70
Show example Ford 300 Clean and Repack Wheel Bearing prices

What is cleaning and repacking the wheel bearings all about?

A car’s wheels rotate on tapered-roller bearings which fit between the stationary axle spindle and the rotating wheel’s hub/brake mechanism. There are bearings on the inner and outer side of the hub to properly support the wheel. These are greased when installed, but the grease can, and does, break down over time, allowing dry contact between the various elements. When left unattended, this will lead to wear and, ultimately, to bearing failure.

Keep in mind:

  • Since noise is the first symptom of metal-to-metal contact, it’s likely that damage has already occurred, and that bearing replacement may be necessary.
  • The job will require the removal of the wheel and brake assembly, so it might be advisable to inspect the brake pads, steering tie rods and suspension pieces in the process.
  • If you’re going to do one wheel, it’s only logical that you should also do the other side.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The front or rear wheels, brakes and hubs are removed from the vehicle
  • The front or rear wheel hubs, bearings are cleaned and greased then install a new grease seal in hub
  • The front or rear wheels, brakes and hubs are installed back on the vehicle
  • The vehicle is lowered off of the jack stands

Our recommendation:

Consider having this job done when your vehicle reaches high mileage, particularly if it has been operated with heavy loads or on unusually bumpy roads.

What is a common symptom indicating you need to clean and repack the wheel bearings?

  • Any noise noticeable from the wheels. It can start as a squeal, and then develop into a growl or even a grinding sound.

How important is this service?

A catastrophic wheel bearing failure can lead to the wheel coming off the car. Obviously, that could cause an accident or, at the very least, serious damage to the vehicle. It’s certainly worth discussing with one of our mechanics.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Genaro

13 years of experience
287 reviews
Genaro
13 years of experience
Ford Explorer Sport Trac V6-4.0L - Clean and Repack Wheel Bearing - Pearland, Texas
Thorough and good service

Jay

37 years of experience
965 reviews
Jay
37 years of experience
Ford Ranchero L6-2.4L - Clean and Repack Wheel Bearing - Fontana, California
On time. Professional. Curtious. Excellent work. Highly recommend

James

31 years of experience
705 reviews
James
31 years of experience
Ford Aerostar V6-4.0L - Clean and Repack Wheel Bearing - Anaheim, California
Professional and all around great human!

Nicholas

11 years of experience
592 reviews
Nicholas
11 years of experience
Ford F-150 V8-5.4L - Clean and Repack Wheel Bearing - Cary, North Carolina
Thanks! Great work!

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Ford Clean and Repack Wheel Bearing services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Chevrolet Silverado
While While the Ford F-150 is still the best-selling pickup truck in the US, the 2012 Chevrolet Silverado is one of the finest half-ton pickups available today. In fact, the Silverado and the GMC Sierra are actually the same vehicle...
P2544 OBD-II Trouble Code: Torque Management Request Input Signal A
P2544 code means an input signal malfunction has been detected in a powertrain-related control module due to problems with electrical input signals
What Do the Direction Indicator Warning Lights Mean?
The direction indicator lights signal when your car is turning left or right. If the lights flash quicker than normal, a bulb may be burnt out.

What temperature should my AC being blowing out at the vents?

One thing you must realize is that, as advanced as these systems are, you may only get a 15 to 25 degree reduction in the ambient temperature. When using the re-circulation option, air from inside the cabin is run back...

Replaced the 02 sensor on my E46 and cel came on again with p1189 code again

Hi there. The problem with BMW-specific OBD-II codes is that they are unbelievably vague, In this case, the P1189 code indicates a fuel control fault detected from Bank 2 sensor 1. This does not automatically mean the O2 sensor is...

Can I just remove the Passlock 2 system

Hi Becca. Thanks for the question. The Passlock system is a safety and security device, so it's not supposed to be removed based on manufacturer recommendations. While it's possible to remove these systems manually, we can't provide tips or suggest...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com