Best Prices for Car pulls in one direction Inspection

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(16)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(16)


Car pulls in one direction Inspection Service

Driving a car that pulls to one side is not only inconvenient, but it is also very dangerous. Maintaining constant pressure on the steering wheel to keep the car going straight is tiring and can pull your focus off the road. Plus, it can be very hard on your tires.

A pull to one side can be caused by a wide variety of issues -- everything from an underinflated tire to failed suspension parts.

Common reasons for this to happen:

Uneven Tire Pressure

Uneven tire pressure is a very common reason for a car to pull to one side. Lower pressure on one side changes the height of the tire, which causes the alignment to change. This is especially true if you have an underinflated rear tire. If the tire is underinflated, it will have increased rolling resistance which will make the pull to one side much more noticeable.

Over inflated tires are just as bad. This condition will also cause the alignment to change. An overinflated tire will cause the vehicle to push away from that tire, also creating abnormal tire wear.

You can see this in two ways:

  • An underinflated tire will show wear on the outer edges.
  • An overinflated tire will show wear down the center of the tire.

This is an easy fix: head to the local gas station and inflate all tires to their proper pressure. Tire pressure stipulations can usually be found on the driver’s side door jam. The optimal pressure is on a sticker. After you have inflated the tires back to their specifications, drive the vehicle to verify the pull is now gone.

Wheel Alignment

Another common cause of a car pulling to the side is a wheel that is out of alignment. Another symptom of misaligned wheels is uneven tread wear. Out-of-alignment wheels will quickly wear down and can lead to more serious issues if not addressed. You should have your vehicle aligned as soon as possible if this is the root cause of the pulling.

Alignment is not an adjustment of the wheels or tires, but of the suspension. A mechanic will adjust the suspension so that the angle of the tires is optimized and the tires make contact with the road according to the manufacturer specifications.

Brake Issues: Stuck Caliper, Collapsed Brake Hose, Unlubricated Slide Pins

Issues with the brake system can cause a vehicle to pull to one side. One of the most common brake issues is a stuck caliper. Brake calipers are powered by the hydraulic brake system and apply pressure to the brake pads to bring the car to a stop. If one of the calipers is stuck, the car will pull to that side.

Other brake issues that cause a car to pull include a collapsed brake hose, or slide pins that are in need of lubrication. Brake issues should be dealt with by a professional, as the braking system is a critical safety component of your car.

Bad Wheel Bearing

If you have a bad wheel bearing, there will probably be more serious symptoms present, but pulling to one side is also a warning sign.

Wheel bearings allow the friction-free rotation of the wheel hub assembly, providing smooth wheel rotation.

There are four wheel bearings on a vehicle, one at each wheel. When a wheel bearing wears out you will hear a grinding noise from the tire area, the steering wheel will sometimes shake, and the car will possibly pull to one side if it is starting to seize. This latter symptom often occurs long after you start hearing the grinding noise.

You should not drive your vehicle in this condition. Contact a mechanic immediately. Replacing a wheel bearing is a complicated repair and should be done by a professional.

Worn Suspension Components

At some point in your vehicle’s lifetime, most of the suspension will need replacing. Whether it is shocks or struts, ball joints, control arms or bushings, all the components wear out over time. As they become worn, they will often shift or lean to one side, especially during braking, which causes the car to pull to that side.

For example, a worn-out control arm bushing will shift when the brakes are applied, causing the vehicle to pull sharply to that side. Suspension parts tend to wear out slowly, so it is possible that you may not notice until they actually break.

The suspension is a key component of your car’s safety system and you should not drive it with broken or worn parts. An annual inspection of your suspension can help avoid surprises.

Worn Steering Linkage

A weak tie rod end will cause the steering wheel to shift to one side or the other while turning. If it gets extremely bad, the steering wheel could shake violently from side to side. Newer vehicles use a rack-and-pinion system that can sometimes be serviced. Older vehicles use a steering box and linkage system that is serviceable.

A broken or severely damaged steering linkage is extremely dangerous, as it could result in loss of control of the steering wheel. If you suspect any of these symptoms, have your car checked by a mechanic.

Torque Steer

Torque steer is when the car pulls to one side as the car initially accelerates. There can be several causes of this condition. Sometimes, loose steering components are the culprit. Other times, a broken motor mount is the cause. Too much slack in a tie rod, a failing lower control-arm bushing, or a ball joint with excess movement can all cause this problem.

You can test for this problem by putting your car in neutral and coasting it down the street. If the pull does not happen when coasting, your alignment is probably not the problem and torque steer could be the source of the issue.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the cause and source of the pulling issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A car is not safe to operate under conditions where it is pulling to one side. Regardless of whether it is a brake issue, suspension issue, or a bad wheel bearing, these repairs require the expertise of a professional. Book a mechanic to perform a thorough inspection as soon as possible.


Recent Car pulls in one direction Inspection reviews

Excellent Rating

(16)

Rating Summary
14
1
0
0
1
14
1
0
0
1

Joseph

21 years of experience
718 reviews
Joseph
21 years of experience
Honda Pilot V6-3.5L - Car pulls in one direction - Sandy, Utah
Knows what he’s doing and always honest. Never lies or tries to over-charge with a bunch off nonsense. He’s awesome!

Paul

24 years of experience
361 reviews
Paul
24 years of experience
Honda Accord L4-2.4L - Car pulls in one direction - Concord, North Carolina
Paul was on time and very knowledgeable! The appointment was quick and easy and I would definitely use them again.

Johnny

34 years of experience
392 reviews
Johnny
34 years of experience
Chevrolet HHR L4-2.2L - Car pulls in one direction - Citrus Heights, California
Johnny had the most amazing knowledge and I had the best experience with him. I would recommend him to everyone I know that needs help or has a car issue. Johnny was chill asked questions provided information and more. I couldn't have thanked him enough.

John

33 years of experience
1126 reviews
John
33 years of experience
Nissan Altima L4-2.5L - Car pulls in one direction - Webster, Texas
As always John takes exceptional care of my vehicle I will never use another mechanic he’s very thorough and honest and I appreciate that

Recent articles & questions

Top 10 Scenic Drives in Rhode Island
Although Rhode Island is the smallest U.S. state, there is far more to explore than the uninitiated may suspect. About 14% of its area abuts saltwater, earning its nickname of the “Ocean State,” and those meetings of land and sea...
The Guide to Legal Car Modifications in Kentucky
ARENA Creative / Shutterstock.com Whether you live in Kentucky or are moving to the area, you need to know what vehicle modifications are permitted so that your car or truck is street legal. The information below will...
How to Use a Ratchet on a Car
Ratchets are hand-held mechanic tools used with sockets to remove or tighten bolts or lug nuts. Ratchets use leverage in a free-spinning motion.

04 maxima will not start, motor turns but does not start

Hi there. The VIAS (variable intake air system) is not likely to create a no start condition. Spraying starting fluid with no result leads me to believe there is no spark. Assuming the engine is properly turning over, diagnosis needs...

Car won't go into gear or it will slowly go into gear but hesitates to pull.

Whether you have a manual transmission or an automatic transmission, if the rpm's are going up and the vehicle is not moving, then the clutch on the manual or the clutches in the automatic are slipping causing the vehicle to...

Could the evap system cause the vehicle to run lean and have hard start up ? I have evap code and lean in both banks

When you are getting lean codes and codes to all the O2 sensors then this is caused by either a MAF sensor or the intake has vacuum leaks in the tube between MAF and throttle body or in PCV system....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

+1 (855) 347-2779 · hi@yourmechanic.com