Dodge Stratus Fuel Injector Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Dodge Stratus Fuel Injector Replacement is $318 with $223 for parts and $95 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2005 Dodge StratusV6-2.7L	Service typeFuel Injector Replacement	Estimate$1102.51	Shop/Dealer Price$1351.89 - $2068.53
2004 Dodge StratusV6-3.0L	Service typeFuel Injector Replacement	Estimate$4068.07	Shop/Dealer Price$5048.02 - $7927.01
2000 Dodge StratusV6-2.5L	Service typeFuel Injector Replacement	Estimate$3103.40	Shop/Dealer Price$3855.91 - $6075.13
1996 Dodge StratusL4-2.0L	Service typeFuel Injector Replacement	Estimate$1713.27	Shop/Dealer Price$2127.84 - $3349.04
2004 Dodge StratusV6-2.7L	Service typeFuel Injector Replacement	Estimate$1074.51	Shop/Dealer Price$1323.93 - $2040.61
1997 Dodge StratusL4-2.0L	Service typeFuel Injector Replacement	Estimate$1775.27	Shop/Dealer Price$2205.36 - $3473.08
1996 Dodge StratusV6-2.5L	Service typeFuel Injector Replacement	Estimate$3111.90	Shop/Dealer Price$3864.18 - $6083.22
1997 Dodge StratusV6-2.5L	Service typeFuel Injector Replacement	Estimate$3111.90	Shop/Dealer Price$3864.82 - $6084.33

Show example Dodge Stratus Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(207)

Rating Summary

187

14

2

0

4

187

14

2

0

4

SEE REVIEWS NEAR ME

Jesse

15 years of experience

14 reviews

Jesse

15 years of experience

by Isiah Tapley

Stratus 2005 - Check Engine Light is on - Daytona Beach, FL

Great mechanic, on time, did a thoroiugh car check, explained his findings, offered service recommendations and price quote.

Michael

14 years of experience

11 reviews

Request Michael

Michael

14 years of experience

Request Michael

by Andres Benavidez

Stratus 2005 - Battery - Albuquerque, NM

N/A

Levi

8 years of experience

53 reviews

Levi

8 years of experience

by Dawn Tullis

Stratus 2002 - Axle / CV Shaft Assembly - Norman, OK

Very personable and knew what he was doing.

Levi

8 years of experience

53 reviews

Levi

8 years of experience

by Dawn Tullis

Stratus 2002 - Control Arm Assembly - Norman, OK

Very personable and knew what he was doing.

Excellent Rating

(207)

Rating Summary

187

14

2

0

4

187

14

2

0

4

SEE REVIEWS NEAR ME

Recent articles & questions

P2000 OBD-II Trouble Code: NOx Trap Efficiency Below Threshold Bank 1

P2000 code definition NOx Trap Efficiency Below Threshold Bank 1 What the P2000 code means P2000 is a general OBD2 diagnostic trouble...

B2107 OBD-II Trouble Code: Front Wiper Motor Relay Circuit Short to Vbatt

B2107 trouble code means there's a circuit error in the front wiper motor relay, caused by a damaged relay, or damaged electrical components.

What is the Most Expensive State for Car Owners?

U.S. States with the highest auto repair, insurance & gas prices.

Loss of power, no check engine light.

Hi, thanks for your question. I'd be happy to help. The clogged converter may or may not give a code. If it gives a code, it would be for an O2 sensor code. I recommend checking the fuel pressure and...

Car cranks but won't start - 2001 Pontiac Firebird

Simply put, the engine only requires three things to start (https://www.yourmechanic.com/services/car-will-not-turn-over-inspection): fuel, air, and gas. The car is likely not receiving one of these in the right amount or at the right time. You can do some simple tests to...

Will a bad crankshaft position sensor cause my car to turn off while at a stop light?

Hi there. The issue could be one of the following. Check The fuel pressure could be low or dropping when the engine is stalling out - possible fuel pump failure The crankshaft position sensor could be shorting out or loosing...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com