Dodge Ramcharger Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Dodge Ramcharger Power Steering Pressure Hose Replacement is $133 with $38 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1980 Dodge RamchargerV8-5.9LService typePower Steering Pressure Hose ReplacementEstimate$325.77Shop/Dealer Price$388.47 - $554.05
1978 Dodge RamchargerV8-5.2LService typePower Steering Pressure Hose ReplacementEstimate$305.73Shop/Dealer Price$368.43 - $534.00
1991 Dodge RamchargerV8-5.2LService typePower Steering Pressure Hose ReplacementEstimate$170.11Shop/Dealer Price$198.91 - $262.76
1993 Dodge RamchargerV8-5.9LService typePower Steering Pressure Hose ReplacementEstimate$170.11Shop/Dealer Price$198.89 - $262.72
1975 Dodge RamchargerV8-5.2LService typePower Steering Pressure Hose ReplacementEstimate$305.73Shop/Dealer Price$368.45 - $534.03
1982 Dodge RamchargerV8-5.2LService typePower Steering Pressure Hose ReplacementEstimate$305.73Shop/Dealer Price$368.43 - $534.00
1976 Dodge RamchargerV8-5.9LService typePower Steering Pressure Hose ReplacementEstimate$310.77Shop/Dealer Price$373.35 - $538.84
1974 Dodge RamchargerV8-5.9LService typePower Steering Pressure Hose ReplacementEstimate$310.77Shop/Dealer Price$373.72 - $539.50
Show example Dodge Ramcharger Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Benji

22 years of experience
277 reviews
Benji
22 years of experience
Dodge Ramcharger V8-5.2L - Car is not starting - Phoenix, Arizona
Absolutely the best! Benji came out and diagnosed my truck. Couldn't have done a better job. Couldn't have asked for a better mechanic. Will absolutely use Benji in the future!

Alexander

20 years of experience
113 reviews
Alexander
20 years of experience
Dodge Ramcharger V8-5.9L - Distributor - Orlando, Florida
Alex is the best! Helped me pinpoint what I need to get my truck running tip top. Would highly recommend!

Nicholas

11 years of experience
585 reviews
Nicholas
11 years of experience
Dodge Ramcharger V8-5.9L - Starter - Wake Forest, North Carolina
A-1 Service and A-1 expedience. I would definitely recommend Nick again!! As a matter of fact, I would like to make another appointment for my truck, and I Definitely want to request Nick to do the work!! Thank you for putting the good starter in my truck!!

Diego

21 years of experience
564 reviews
Diego
21 years of experience
Dodge Ramcharger V8-5.2L - Fuel Pump - Phoenix, Arizona
Simply amazing. Couldn't have asked for a better mechanic. Helped me with all my problems that came forthright. Very knowledgeable.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Dodge Ramcharger services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Bumper
The The bumper acts as a guard between other objects and your front end. While it doesn’t provide much in the way of passenger safety, it does absorb some impact and put a barrier between the object you hit (or...
P0135 OBD-II Trouble Code: O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 1)
P0135 code definition O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 1) What the P0135 code means P0135 is the OBD-II generic...
How to Become a Drag Racer
For For auto enthusiasts, few things are as glorified as drag racing. From movies to video games to ESPN showcases, drag racing is seen as a symbol of fast cars and a love of driving. While it may seem like...

What is the cost to replace oxygen sensors P0139, PO159

Hi there. In general, there are two O2 sensors on your Toyota, an upstream sensor (located near the exhaust manifold) and downstream (located after the catalytic converter). Based on the error codes you listed however, it's not 100% certain that...

Truck won't start, but lights come on and flicker

What you are describing sounds like a faulty starter solenoid. A faulty starter solenoid (https://www.yourmechanic.com/services/starter-replacement) will generally produce a clicking sound when turning the key. The starter solenoid is located on the starter and has internal electrical contacts that transmit...

I replaced the electronic throttle body On my 2014 Nissan Sentra. It is a barely used part. Does the relearn procedure need to be done?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com