Dodge Ram 2500 Van Engine is misfiring Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(27)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(27)

Engine is misfiring Inspection Service

How much does a Engine is misfiring Inspection cost?

On average, the cost for a Dodge Ram 2500 Van Engine is misfiring Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Dodge Ram 2500 VanV8-5.9LService typeEngine is misfiring InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1999 Dodge Ram 2500 VanV8-5.9LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1999 Dodge Ram 2500 VanV8-5.2LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2000 Dodge Ram 2500 VanV8-5.9LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2002 Dodge Ram 2500 VanV8-5.9LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2003 Dodge Ram 2500 VanV8-5.2LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2002 Dodge Ram 2500 VanV8-5.2LService typeEngine is misfiring InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2000 Dodge Ram 2500 VanV8-5.2LService typeEngine is misfiring InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Dodge Ram 2500 Van Engine is misfiring Inspection prices

When an engines misfires, it’s usually readily apparent to the driver from the stuttering and jerking produced by the engine when one or more cylinders fails to fire properly, either because of ignition- or fuel-related issues. It is accompanied by a loss of power in direct proportion to the severity of the misfire.

It can be tricky for to track down the problem if the misfire only occurs under certain circumstances, for example, under load. Not all misfires occur across the operating spectrum.

For older vehicles:

On older, carbureted vehicles, the culprit will almost certainly be in the ignition system as older vehicles lack many of the sophisticated sensors that can cause a misfire. A vacuum leak or a faulty fuel pump can also cause this symptom as well. The first thing the mechanic will do is determine which cylinder or cylinders is misfiring, and the spark plug color is probably the best way to tell. The guilty plug will most likely be grayer than the others, which should tend toward brown coloring. If needed, the spark plug can be replaced.

The next step would be checking the wiring to that plug for cracks and deterioration, and replace as necessary.

For most modern vehicles:

In modern cars, misfiring will invariably be accompanied by a Check Engine light. In fact, checking for efficient combustion was the primary reason the U.S. government introduced the rules for OBD-II (on-board diagnostics, second generation). It was part of the push toward cleaner exhaust emissions.

A code reader will tell you which cylinder is to blame, but it may not say whether it is a problem relating to the injector serving that cylinder or the systems delivering the ignition spark. As with older vehicles, a look at the wires and spark plugs is a good idea. Checking them in the dark will sometimes reveal errant spark tracking, as will spraying them with a fine water mist.

One way mechanics check which spark plug is failing to hold its own is by running the engine at an idle speed high enough to produce the misfire, then removing leads from the coilpack (the unit that looks like the distributor we are used to seeing in older vehicles ) one by one. Most removals will cause a profound change in idling performance, but a defective wire will not. That will suggest that it’s either the spark plug or the coil serving that cylinder at fault. If a new spark plug at that cylinder does not remove the stumble, the mechanic may need to replace the coil pack or the wires as a set.

If it isn’t an ignition issue, then the injectors will need to be checked. A mechanic uses a multimeter to check the resistance value at each injector. It may be a bit difficult to reach them, sometimes requiring the removal of an engine cover and the intake manifold. The mechanic disconnects the injector, then touches the multimeter probes to the two connector prongs to read the value, in Ohms. If any of the injectors read outside of the specified values, they will need to be replaced.

Along the same lines, a fuel pump starting to go bad can also cause misfires or similar issues and can be diagnosed with a fuel pressure check of the entire system with the appropriate equipment. This should only be done by a qualified mechanic as the fuel system is highly pressurized and of course, fuel is flammable.

Common reasons for this to happen:

  • Faulty spark plugs or wires
  • Faulty ignition coil
  • Broken piston rings
  • Burnt or bent valves
  • Broken valve springs
  • Camshaft worn out
  • Fuel injector is not working

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the misfiring engine, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A misfiring engine is accompanied by a loss of power, which makes this issue a critical one to correct promptly. Book a mechanic to perform a thorough inspection as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(27)

Rating Summary
24
1
1
0
1
24
1
1
0
1

Joe

43 years of experience
821 reviews
Joe
43 years of experience
Dodge Ram 2500 Van V8-5.9L - When I slow down and stop the car, engine shuts off - Saint Petersburg, Florida
Joe is an AMAZING mechanic and person. He was very thorough and walked me through everything he was doing and why. I 100% trust him, which is the best thing you can look for in a mechanic.

Ira

36 years of experience
259 reviews
Ira
36 years of experience
Dodge Ram 2500 Van V8-5.2L - Car is not starting - Tampa, Florida
Ira was very professional he took his time to diagnose the problems I was having with my vehicle.I was very pleased with him and his work. I would reccomend him and your company to anyone who need his services.

Chris

20 years of experience
448 reviews
Chris
20 years of experience
Dodge Ram 2500 Van V8-5.9L - Starter - Portland, Oregon
Friendly and messaged back quickly. Good experience.

Michael

16 years of experience
606 reviews
Michael
16 years of experience
Dodge Ram 2500 Van V8-5.2L - Coolant is leaking - Marietta, Georgia
Excellent

Excellent Rating

(27)

Rating Summary
24
1
1
0
1
24
1
1
0
1
Number of Dodge Ram 2500 Van services completed
297+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

2014 Jeep Cherokee vs. 2014 Jeep Wrangler: Which One Should I Buy?
SUVs are a crowded market, but Jeep has long been a name to remember. SUVs are generally built on the chassis of a truck and provide the overall handling of a truck instead of feeling more like a car that...
Is it Safe to Drive with a Leaking Axle Seal?
An An axle seal is the part of the vehicle that connects the axle to the rear differential, or the transmission. The purpose of the axle seal is to keep transmission fluid from leaking. Depending on the size of the...
How to Prepare for the Missouri Driver’s Written Test
Before Before you can drive in the state of Missouri, you need to have your license, naturally. Before you can get your license though, you need to have your learner’s permit, and that means you need to pass the state’s...

How do I use the Digital Speedometer feature in the driver information center (DIC)?

The Digital Speedometer feature in the driver information center (DIC) allows the speedometer to be displayed in digital format through the DIC. To view the Digital Speedometer, press the MENU button until the DIC displays Trip/Fuel Information Menu, then use...

Temperature gauge fluctuates

Hi there, thanks for your question. Temperature gauge fluctuation could be due a faulty temperature gauge or a faulty thermostat (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-thermostat). If tested with a radar gun, this would be an external temperature source for testing the temperature, which would...

Why would the ABS light be on if the ABS module does not see a problem or set a code?

Hi there: If the ABS warning light (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-the-abs-light-on) comes on while you are driving, it means the ABS is not working properly. Your normal brakes will work, but the anti-lock brakes will not. If the light remains on, you need...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com