Dodge Omni Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(52)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(52)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Dodge Omni Intake Manifold Gaskets Replacement is $279 with $69 for parts and $210 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Dodge OmniL4-2.2LService typeIntake Manifold Gaskets ReplacementEstimate$1123.00Shop/Dealer Price$1189.34 - $1338.93
Show example Dodge Omni Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(52)

Rating Summary
50
1
1
0
0
50
1
1
0
0

Harish

28 years of experience
588 reviews
Harish
28 years of experience
Dodge Grand Caravan V6-3.3L - Intake Manifold Gaskets - Concord, North Carolina
Great guy with good customer service!!

Colin

28 years of experience
117 reviews
Colin
28 years of experience
Dodge Charger V6-3.5L - Intake Manifold Gaskets - Lakeland, Florida
Colins knows his cars very polite and very professional

Daniel

21 years of experience
52 reviews
Daniel
21 years of experience
Dodge Avenger V6-3.6L - Intake Manifold Gaskets - San Diego, California
Very knowledgeable and professional. Did a GREAT JOB!

Andrew

15 years of experience
141 reviews
Andrew
15 years of experience
Dodge Grand Caravan V6-3.8L - Intake Manifold Gaskets Replacement - Tacoma, Washington
Good

Excellent Rating

(52)

Rating Summary
50
1
1
0
0
50
1
1
0
0
Number of Dodge Intake Manifold Gaskets Replacement services completed
572+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Live in Your Car for a Short Time
So So you’ve just moved to a new city and your apartment won’t be ready for a month. Or maybe it’s summer break and you just haven’t been able to find a place. Or you want to see what it’s...
Rules of the Road For Alabama Drivers
While While many of the rules of the road are common sense or rely on a driver’s knowledge of how to read signs, there are other rules that may differ from state to state. The following are some of the...
The Guide to Colored Curb Zones in Alaska
Alaska Alaska parking laws: understanding the basics Many of the cities in Alaska will have their own specific parking laws that apply to that town or municipality only. However, there are a number of regulations and laws that tend to...

Why does my car accelerate slow?

There are many factors we must take into account before making this type of diagnosis. The concern can be electrical or even mechanical. A seized brake caliper (https://www.yourmechanic.com/services/brake-caliper-replacement) can hinder performance. A poorly tuned engine can also suffer performance issues...

I don't have any clue what happened!!!

Hello. The squeaky drive belt was the cause of the problem. It has likely failed. The water pump, which is driven by the drive belt, is responsible for the flow of coolant through the cooling system and the heater core....

How much to do a tune up on a 2008 Scion I just bought and I am moving to Kansas in the next to days?

Hi there. Tune-up is an outdated phrase that has no true meaning for today's vehicles. Today's vehicles have maintenance schedules that list what needs to be performed at time and mileage intervals. There are many resources available online that may...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com