Dodge Nitro Oxygen Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Oxygen Sensor Replacement Service

How much does a Oxygen Sensor Replacement cost?

On average, the cost for a Dodge Nitro Oxygen Sensor Replacement is $250 with $110 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Dodge NitroV6-4.0LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$374.88Shop/Dealer Price$433.45 - $601.06
2010 Dodge NitroV6-4.0LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$365.87Shop/Dealer Price$422.67 - $588.96
2011 Dodge NitroV6-3.7LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$365.87Shop/Dealer Price$422.70 - $589.00
2007 Dodge NitroV6-4.0LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$365.87Shop/Dealer Price$422.70 - $589.00
2008 Dodge NitroV6-4.0LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$365.87Shop/Dealer Price$424.17 - $591.58
2009 Dodge NitroV6-4.0LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$365.87Shop/Dealer Price$422.84 - $589.25
2008 Dodge NitroV6-4.0LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$365.87Shop/Dealer Price$422.71 - $589.03
2010 Dodge NitroV6-3.7LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$365.87Shop/Dealer Price$422.70 - $589.00
Show example Dodge Nitro Oxygen Sensor Replacement prices

What is the Oxygen Sensor all about?

With each new model year, manufacturers are adding more oxygen sensors to better manage engine operation. Some high performance engines have an oxygen sensor for each cylinder as well as one for the rear of each catalytic convertor. The sensors are located either underneath the hood or underneath the car. The oxygen sensors are connected (screwed) to the exhaust pipe, either in front or back of the catalytic converter. The front (upstream) sensors measure the amount of oxygen in the exhaust system. The purpose of the front oxygen sensor(s) is to measure how rich or lean the gases are as the gases exit the combustion chamber. Depending upon whether the exhaust gas is lean (high in oxygen content) or rich (low in oxygen content), the amount of fuel entering the engine is adjusted by the engine management computer to try and maintain an ideal mixture that produces the lowest emissions output from the catalytic convertor.

Rear (downstream) sensors are located behind the catalytic converter. The purpose of the rear oxygen sensor(s) is to monitor the oxygen content of the exhaust gases leaving the catalytic convertor.

If one or more of the oxygen sensors are faulty, your car may not pass the emissions test. If you drive your car with a faulty oxygen sensor, you may get poor gas mileage and it can damage the catalytic converter.

Oxygen Sensor-MATROX-1

When replacing the oxygen sensor remember:

  • Many oxygen sensors are damaged by leaking oil or coolant. If that is the case, the cause of that leak needs to be identified and repaired, or else the replacement oxygen sensor will be damaged as well.
  • New vehicles require specific oxygen sensors, and not the universal sensors that were common prior to 1996.

How it's done:

  • Scan the computer in the car for codes.
  • Inspect for vacuum leaks and holes in the exhaust system.
  • Remove and replace the oxygen sensor if it is bad.
  • Check electrical connections.
  • Check for proper operation of oxygen sensors.
  • Clear diagnostic codes.
  • Test drive car.

Our recommendation:

Keep up with the tune-ups. If check engine light is on, don't drive the car too long without getting it inspected. If check engine light is flashing, pull over and get the car towed to avoid costly repairs. Ask the mechanic to inspect the vacuum hoses and leaks in the exhaust system. If the vacuum hose or exhaust system is leaking, it will display an oxygen sensor fault code. Replacing an oxygen sensor may not fix the problem.

What common symptoms indicate you may need to replace the Oxygen Sensor?

  • Check Engine light is on.
  • Car is getting poor gas mileage.
  • Emission test fails.

How important is replacing the oxygen sensor?

Your vehicle has multiple oxygen sensors, and they all help the car run optimally. The front sensors measure how much oxygen is in the exhaust stream to measure how rich or lean the gases leaving the gas chamber are. The rear sensors measure the oxygen content of the gases as they leave the catalytic converter. The oxygen sensors then relay this information to your vehicle’s electronic control unit, so that it can adjust as necessary. Because cars depend on an ideal fuel-to-air ratio to function optimally, the oxygen sensors are leaned on for engine performance. When your oxygen sensors fail your car will run less smoothly, get worse mileage, and have worse emissions.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Dodge Nitro Oxygen Sensor Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How Long Does an Evaporator Temperature Sensor (Switch) Last?
If If you have air conditioning in your vehicle, which pretty much all modern vehicles have, then you have an evaporator temperature sensor (switch). This switch plays an important role in making sure the correct temperature is attained, and that...
How Long Does a Speed Sensor Last?
Today’s Today’s cars are equipped with a very wide range of sensors. Yours has a mass airflow sensor, at least one oxygen sensor, and many others. The vehicle speed sensor (VSS) is usually located on the transmission’s output shaft (although...
How to Replace a Cylinder Head Coolant Temperature Sensor
Signs of coolant temperature sensor failures include sluggish acceleration, hard starting, and a Check Engine or Service Engine Soon Light.

Check Engine light comes on when cars RPMS go over 4000 error code P0344

Hi there. This code is for a bad camshaft sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement). It can be caused by a bad sensor or it can come from another issue. I usually check the sensor first and then I check the timing belt (https://www.yourmechanic.com/services/timing-belt-replacement)....

Sometimes my car accelerates very slowly but the RPM rises

Hello. I would recommend first checking the connections to the MAF sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) and cleaning it as sometimes they will get dirty and cause this kind of problem. If this does not work you may need to have it replaced....

Where is the camshaft position sensor located on a 2011 Kia Optima EX GDI

Hi there - the camshaft position sensor (https://www.yourmechanic.com/article/how-to-replace-a-camshaft-position-sensor-by-mia-bevacqua) is located on the drive-side end of the top of the engine on your vehicle. It is a round black plastic housing - golf-ball size - attached to the engine with one...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com