Dodge Magnum Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(185)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(185)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Dodge Magnum Headlight Bulb Replacement is $155 with $15 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Dodge MagnumV6-3.5LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$185.60Shop/Dealer Price$196.85 - $222.50
2006 Dodge MagnumV8-5.7LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.07 - $210.40
2008 Dodge MagnumV6-2.7LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
2005 Dodge MagnumV8-5.7LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
2005 Dodge MagnumV6-2.7LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$187.57 - $213.02
2008 Dodge MagnumV6-2.7LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.24 - $210.69
2007 Dodge MagnumV6-3.5LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.11 - $210.47
2008 Dodge MagnumV8-6.1LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
Show example Dodge Magnum Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(185)

Rating Summary
174
8
0
1
2
174
8
0
1
2

Chris

7 years of experience
105 reviews
Chris
7 years of experience
Dodge Magnum V6-2.7L - When I slow down and stop the car, engine shuts off - McDonough, Georgia
Very professional. Very honest. His analysis was extremely helpful. Thank Chris!

Jonathan

12 years of experience
40 reviews
Jonathan
12 years of experience
Dodge Magnum V8-5.7L - Coolant is leaking - Chula Vista, California
Very helpful and professional.

Dario

10 years of experience
58 reviews
Dario
10 years of experience
Dodge Magnum V6-3.5L - Coolant is leaking - Lithonia, Georgia
Great

Breck

21 years of experience
681 reviews
Breck
21 years of experience
Dodge Magnum V6-2.7L - Car is not starting - Houston, Texas
He got our car started and gave us an estimate for the required repair

Excellent Rating

(185)

Rating Summary
174
8
0
1
2
174
8
0
1
2
Number of Dodge Magnum services completed
2035+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Replace a Trunk Lock Cylinder
A car trunk is secured by a trunk lock, which works via a trunk lock cylinder. Replacing a bad cylinder is imperative to your vehicle’s security.
P2774 OBD-II Trouble Code: 4WD Low Switch Circuit High
P2774 means a problem in the actuator switch circuit for 4WD. Problems may include faulty sensors, solenoids, switches and defective wiring harness.
How to Lubricate Doors
When When a door hinge or detent rod becomes dry, they will squeak. You may see grease (https://www.yourmechanic.com/article/how-to-get-rid-of-grease-stains-in-a-car-by-joyce-morse) on the door hinge and believe it is well greased, but the key to a properly lubricated door hinge is getting the...

Gears won't shift

If the gears are seizing, and the transmission will not shift, it is possible that there may be some sort of electrical or mechanical problem. I would recommend having a professional technician, such as one from YourMechanic, diagnose the vehicle's...

I have to park my car with hand break. Park doesn't work !

You will need to have the shift cable ends inspected for worn out bushings. The shifter is not putting the transmission all the way back into park. You may have to replace the shift cable or if the connectors are...

Truck is overheating and the heater is blowing cold air.

Hi there. There is a blockage in the engine preventing the engine from cycling the coolant. If there is a new water pump and a new thermostat, then the coolant should be cycling. Check the radiator for any blockages. Drain...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com