Dodge Magnum Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(153)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(153)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Dodge Magnum Car Battery Replacement is $300 with $160 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Dodge MagnumV8-6.1LService typeCar Battery ReplacementEstimate$554.74Shop/Dealer Price$658.28 - $960.78
2008 Dodge MagnumV8-5.7LService typeCar Battery ReplacementEstimate$545.73Shop/Dealer Price$647.50 - $948.68
2006 Dodge MagnumV6-2.7LService typeCar Battery ReplacementEstimate$545.73Shop/Dealer Price$647.52 - $948.72
2005 Dodge MagnumV6-3.5LService typeCar Battery ReplacementEstimate$545.73Shop/Dealer Price$647.52 - $948.72
2005 Dodge MagnumV6-2.7LService typeCar Battery ReplacementEstimate$545.73Shop/Dealer Price$649.00 - $951.30
2005 Dodge MagnumV8-5.7LService typeCar Battery ReplacementEstimate$545.73Shop/Dealer Price$647.66 - $948.97
2008 Dodge MagnumV6-2.7LService typeCar Battery ReplacementEstimate$545.73Shop/Dealer Price$647.54 - $948.75
2007 Dodge MagnumV8-5.7LService typeCar Battery ReplacementEstimate$545.73Shop/Dealer Price$647.52 - $948.72
Show example Dodge Magnum Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(153)

Rating Summary
143
7
0
1
2
143
7
0
1
2

Jason

0 years of experience
417 reviews
Jason
0 years of experience
Magnum 2005 - AC is not working - Phoenix, AZ
Great experience! Timely, professional, and knowledgeable.

Augustine

10 years of experience
110 reviews
Augustine
10 years of experience
Magnum 2005 - Battery will not hold a charge - Albuquerque, NM
He was very pleasant and was honest. He saved me a lot of money by running down the problem.

Peter

10 years of experience
117 reviews
Peter
10 years of experience
Magnum 2006 - Transmission Fluid Service - Brentwood, CA
Peter Was very professional got right to work showed up on time did a excellent job I would highly recommend Peter to work on your vehicle

Robert

18 years of experience
191 reviews
Robert
18 years of experience
Magnum 2006 - Oil Pressure Sensor - Fort Worth, TX
Amazing mechanic. On time and very pleased with his work. Will definitely be coming back. 10 stars but only could give 5

Excellent Rating

(153)

Rating Summary
143
7
0
1
2
143
7
0
1
2
Number of Dodge Magnum services completed
1683+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Maintain Automotive Hand Tools
Automotive technicians take good care of automotive hand tools to stay safe and save money. Keep parts clean and in working order to maintain tools.
What are the Car Pool Lane Rules in Massachusetts?
Massachusetts Massachusetts is one of the prettiest states in the nation, and its roads are better known for being scenic, relaxing, and rural (https://www.yourmechanic.com/article/top-10-scenic-drives-in-massachusetts), rather than busy and crowded. But, as in most states, a number of drivers rely on...
P2635 OBD-II Trouble Code: Fuel Pump ‘A’ Low Flow / Performance
P2635 P2635 Code Definition A P2635 code is a generic powertrain code related to computer output circuit issues. It means that the fuel pump 'A’ is registering a low flow, or one not within the preset parameters. Codes related to...

Vibration from front tire.

Greetings. Out of balance tires can cause some pretty terrible vibrations. Wheel mounting, the steering system, and front suspension should all be inspected (https://www.yourmechanic.com/services/brakes-steering-and-suspension-inspection) over by a certified mechanic for any looseness or weak components. A trained technician, like the...

Brakes no longer working.

If you step on the brake pedal and it feels soft or drops to the vehicle floor, air has entered the system. However, if the brake pedal is hard and difficult to depress, the power brake booster may be at...

Brake rotors keep getting warped - 2010 Land Rover LR4

Brake rotor warpage (https://www.yourmechanic.com/article/why-do-brake-rotors-warp) occurs when there is too much heat created during braking operations and then the heat is not dissipated quickly enough. Heat is generally removed from the brakes via ductwork directing air over the brakes, slots in...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com