Dodge Intrepid Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(91)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(91)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Dodge Intrepid Front Crankshaft Seal Replacement is $170 with $16 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Dodge IntrepidV6-2.7LService typeFront Crankshaft Seal ReplacementEstimate$296.64Shop/Dealer Price$311.05 - $340.49
1995 Dodge IntrepidV6-3.3LService typeFront Crankshaft Seal ReplacementEstimate$251.11Shop/Dealer Price$261.89 - $288.04
2000 Dodge IntrepidV6-3.5LService typeFront Crankshaft Seal ReplacementEstimate$1159.41Shop/Dealer Price$1355.74 - $1933.44
2003 Dodge IntrepidV6-3.5LService typeFront Crankshaft Seal ReplacementEstimate$1340.85Shop/Dealer Price$1582.54 - $2296.31
2000 Dodge IntrepidV6-2.7LService typeFront Crankshaft Seal ReplacementEstimate$281.32Shop/Dealer Price$295.27 - $324.37
2001 Dodge IntrepidV6-2.7LService typeFront Crankshaft Seal ReplacementEstimate$281.32Shop/Dealer Price$293.01 - $320.41
1998 Dodge IntrepidV6-3.2LService typeFront Crankshaft Seal ReplacementEstimate$1112.69Shop/Dealer Price$1297.38 - $1840.07
2004 Dodge IntrepidV6-3.5LService typeFront Crankshaft Seal ReplacementEstimate$1340.85Shop/Dealer Price$1582.54 - $2296.31
Show example Dodge Intrepid Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(91)

Rating Summary
81
2
3
0
5
81
2
3
0
5

Jeffrey

28 years of experience
870 reviews
Jeffrey
28 years of experience
Dodge Intrepid V6-3.3L - Power Steering Pressure Hose - Charlotte, North Carolina
Jeffrey is a Godsend for me and my vehicle. I have used him for 3 repair services and he has been able to be thorough throughout all of the repairs and make all of the recommendations that is necessary. When the actual auto shops were not even able to diagnose the problems or recommend me junking the vehicle, Jeffrey has been able to counter that and them some. he has even been able to solve the check engine light problem. Very convenient service and I am glad that it serves in Charlotte and he is a part of the team!!!

Jeff

34 years of experience
441 reviews
Jeff
34 years of experience
Dodge Intrepid V6-3.2L - Oil Change - Rancho Cordova, California
On time, very friendly, took the time to explain everything

J.

17 years of experience
24 reviews
J.
17 years of experience
Dodge Intrepid V6-3.3L - Car will not turn over - Kansas City, Missouri
J C was the best i will be requesting him for in the future

Robert

38 years of experience
237 reviews
Robert
38 years of experience
Dodge Intrepid V6-2.7L - Starter - Fayetteville, Georgia
Was helpful being that I'm not from where I live and it helped to have a mechanic come to where my car was stranded

Excellent Rating

(91)

Rating Summary
81
2
3
0
5
81
2
3
0
5
Number of Dodge Intrepid services completed
1001+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

Utah Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Utah. Speed limits in Utah Utah has one of the highest posted speed limits in the United States,...
3 Essential Things to Know About Your Car’s Gas Tank
The The gas tank of the vehicle holds the fuel, which makes the car run. The fuel is propelled by the fuel pump. The gas tank can be made out of plastic high-density polyethylene, which can be made into complex...
How to Buy a Good Quality Back Up Camera System
Back Back up cameras have become standard equipment on many vehicles today, but if you’re driving a model that didn’t ship with one from the automaker, you can have an aftermarket system installed. Of course, you need to consider several...

Cooling fans

This can be caused by a number of things such as low coolant levels (https://www.yourmechanic.com/services/top-off-coolant), a faulty thermostat (https://www.yourmechanic.com/services/thermostat-replacement), or a failing coolant fan switch. As you may know the coolant fan switch helps to maintain the proper coolant temperature...

No throttle response until warm, then not very good.

Hi there. The EBPV (exhaust back pressure valve) is sticking or the EBP (exhaust back pressure) sensor tube is wet which freezes in the cold preventing the EBP sensor from seeing the increase in EBP as you attempt to throttle...

Car is shaking really bad

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com