Dodge Daytona Car starts and then dies Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Car starts and then dies Inspection Service

How much does a Car starts and then dies Inspection cost?

On average, the cost for a Dodge Daytona Car starts and then dies Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Dodge DaytonaV6-3.0LService typeCar starts and then dies InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1989 Dodge DaytonaL4-2.2L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 Dodge DaytonaL4-2.5LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 Dodge DaytonaL4-2.2L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1987 Dodge DaytonaL4-2.2L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1987 Dodge DaytonaL4-2.5LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1993 Dodge DaytonaL4-2.5LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1992 Dodge DaytonaV6-3.0LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Dodge Daytona Car starts and then dies Inspection prices

Starting a vehicle only to have it quit immediately after can be confusing and annoying for many drivers especially if their vehicle has not experienced this type of issue before. Typically, a vehicle will start and then quit because of an issue with the fuel or electrical system. It is important to monitor fuel levels as well as warning lights which can signal to the driver that a vehicle may quit unexpectedly.

How this system works:

To start a vehicle, the electrical system, composed of the battery and starter, turns the engine over. Once running, the engine requires a constant flow of gasoline and good spark to keep that fuel igniting. If gasoline is not readily available, or if there is not enough spark, the engine will quit. More modern vehicles with sophisticated computers may affect the way the vehicle runs. These computers help the car run efficiently but can also shut a car down if the fuel/air mixture is not correct. While an older vehicle may be less sophisticated and easier to diagnose, the computers on modern cars can provide more specific information when connected to a code scanner/reader.

Common reasons for this to happen:

  • Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so that the right amount of fuel can be delivered from the fuel injectors. When a sensor begins to fail, the vehicle’s computer may generate an error code to indicate that something has gone wrong. An issue with the mass airflow sensor may manifest itself when a car starts and then stalls soon after starting.

  • Fuel Pump Relay: The fuel pump relay functions much like a fuse for an electric fuel pump. The fuel pump relay engages as the vehicle is started and starts the fuel pump. While the vehicle is running, the fuel pump relay turns off and the fuel pump is powered by the oil pressure sending unit. If the vehicle’s computer is unable to keep the fuel pump relay running throughout the starting process, the vehicle may start and quit immediately after starting.

  • Ignition Coil: Your vehicle’s ignition coil takes the low voltage of the battery and provides the thousands of volts needed to create a spark in the spark plugs. When an ignition coil begins to fail, it may struggle to provide consistent spark to the plugs, causing the engine to stall after starting.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why the vehicle starts and then dies. The mechanic will then provide a detailed inspection report outlining why the vehicle quit and the cost of any repairs that need to be made.

How it's done:

A mechanic will begin diagnosing your vehicle’s issue by plugging a code reader/scanner into the vehicle’s computer. The mechanic should be able to get more information from your vehicle’s computer on what component has failed. Using this information, the mechanic can begin necessary repairs.

If your vehicle has a bad or failing mass airflow sensor, the mechanic will begin by finding the sensor in the engine bay and checking for any signs of failure. The mechanic should check the wire harness connected to the sensor to ensure that all of wires are properly connected. After removing the sensor, the mechanic should be able to discover the nature of the failure and replace the sensor.

If the mechanic suspects an issue with the fuel pump relay, he or she should check the vehicle’s computer for a problem. If the vehicle’s computer is having difficulty providing consistent power to the fuel pump relay, the computer may need to be reprogrammed or replaced. If the vehicle’s computer is functioning normally, the mechanic may need to replace the fuel pump relay.

If the mechanic suspects that the ignition coil may be faulty, he or she should first disconnect the battery before beginning work. The mechanic should then begin the process of disconnecting wires from the ignition coil and removing it from the engine bay. The mechanic will then install the new ignition coil and ensure that it is connected properly. The mechanic should then reconnect the battery and test the new coil.

With all repairs, the mechanic will ensure the newly installed parts work properly. The mechanic can then turn off and warning lights that may have come on while the vehicle was not running properly.

How important is this service?

If your vehicle is starting but dying soon after starting, you should have it checked out by a mechanic. Issues involving the fuel management and electrical systems will become worse if not dealt with. Diligence and paying attention to warning lights may help prevent further damage to critical engine component and may save money in repairs. A vehicle that quits after starting can be inconvenient and having a mobile mechanic inspect and repair you vehicle will ensure that you and your vehicle are back on the road soon.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

James

31 years of experience
690 reviews
James
31 years of experience
Dodge Daytona V6-3.0L - Oil Change - Anaheim, California
Good job James....

Ricardo

23 years of experience
199 reviews
Ricardo
23 years of experience
Dodge Daytona L4-2.5L - Car idle is rough - Homestead, Florida
Great service he was very sharp and experienced. Did a thorough inspection of my vehicle and explained all the things in a clear and concise way.

Jason

23 years of experience
190 reviews
Jason
23 years of experience
Dodge Daytona L4-2.5L - Engine or Transmission Mount Replacement - Hendersonville, Tennessee
Jason goes way above and beyond to provide great service. I have an older car that is hard to find parts for and he took care of everything. I will definitely be scheduling any future service I need with him! I give him 10 stars out of five!!

Jason

23 years of experience
190 reviews
Jason
23 years of experience
Dodge Daytona L4-2.5L - Spark Plugs - Hendersonville, Tennessee
Jason is fantastic! I could not be happier to have found him and YourMechanic! I have a 1990 Dodge Daytona which was and still is my "dream car." Special ordered it brand new and always said I would drive it until the wheels fall off! I feel completely confident that Jason will be my "go to" special mechanic from now on! He is extremely knowledgeable and such a super nice guy. I highly recommend him!!!

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Dodge Daytona services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Hand Wash a Car
Washing your car by hand has many benefits. It makes your car look great, and it also helps make your car paint last longer.
Windshield Laws in Texas
Those Those who drive on the roadways in Texas know that they must follow a variety of traffic laws to keep themselves and others safe. While the rules of the road are important, so too are the rules for the...
P0608 OBD-II Trouble Code: Control Module VSS Output "A" Malfunction
P0608 means there is an malfunction in the vehicle speed sensor A control module often due too faulty speed sensor or shorted electrical wiring.

Car not starting up.

If your car is cranking but doesn't start, that points toward a spark or fuel delivery problem because there is only three basic requirements to run spark, fuel and compression. Have a certified mechanic inspect (https://www.yourmechanic.com/services/car-is-not-starting-inspection) for fuel pressure spark...

Code P0335. Crank position circuit code

Hello. Your crankshaft position sensor has failed. Most engines support a fall-back mode where engine timing is then determined by the cam position sensor. It is less precise than when the crank position sensor is used, but allows the engine...

I was driving and noticed smoke coming from my car then my car cut off and then started back up I then pulled over and popped the hood and noticed a oil leak from somewhere what do u think it could be

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com