Dodge Dart Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Dodge Dart Car Thermostat Replacement is $304 with $150 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Dodge DartL4-1.4L TurboService typeCar Thermostat ReplacementEstimate$634.10Shop/Dealer Price$753.96 - $1104.63
2015 Dodge DartL4-2.4LService typeCar Thermostat ReplacementEstimate$680.15Shop/Dealer Price$760.07 - $989.08
2013 Dodge DartL4-2.0LService typeCar Thermostat ReplacementEstimate$680.15Shop/Dealer Price$760.13 - $989.19
2013 Dodge DartL4-1.4L TurboService typeCar Thermostat ReplacementEstimate$465.77Shop/Dealer Price$544.11 - $774.52
2016 Dodge DartL4-2.4LService typeCar Thermostat ReplacementEstimate$680.15Shop/Dealer Price$763.96 - $995.89
2015 Dodge DartL4-2.0LService typeCar Thermostat ReplacementEstimate$680.15Shop/Dealer Price$760.49 - $989.83
2014 Dodge DartL4-1.4L TurboService typeCar Thermostat ReplacementEstimate$465.77Shop/Dealer Price$544.12 - $774.56
2014 Dodge DartL4-2.4LService typeCar Thermostat ReplacementEstimate$680.15Shop/Dealer Price$760.13 - $989.19
Show example Dodge Dart Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Dodge Dart Car Thermostat Replacement services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Door Lock Relay
If the power door locks function intermittently or do not work at all, you may need to replace the door lock relay.
Industry News for Automotive Techs: October 1-7
Wireless electric car charging, VW diesel scandal payouts, 3D-printed car technology, new Cardone car parts, and high September auto sales.
B1949 OBD-II Trouble Code: Climate Control Water Temperature Sensor Circuit Failure
B1949 means there is a failure in the circuit for the climate control water temperature sensor, likely due to an electrical problem somewhere.

Key on, no start and no dash lights. 1996 Ford Explorer

Hello. This is likely a loose terminal or corroded battery connection. Make sure the cables and terminals are clean (https://www.yourmechanic.com/article/how-to-clean-battery-terminal-connections-on-a-car). Also check the ground in the engine compartment. It sounds simple, but something like this can easily cut all power...

I just had my sparks plugged changed and the wires on my 2009 c6 corvette. The engining is still knocking and shaking. The light i

Given the relatively high mileage you might want to first test the engine compression in case low compression, perhaps due to valve and/or piston ring wear, is an underlying issue. If compression is good, any stored diagnostic trouble codes should...

I get a vibration in my 2006 chevy trailblazer when I accelerate

If you are getting a front end vibration during acceleration it is possible that you could have loose suspension parts. Suspension parts such as ball joints, tie rod ends, and sway bar links often develop free play after being worn...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com