Dodge Dakota Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(540)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(540)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Dodge Dakota Front Crankshaft Seal Replacement is $163 with $23 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Dodge DakotaL4-2.5LService typeFront Crankshaft Seal ReplacementEstimate$713.44Shop/Dealer Price$828.53 - $1159.22
1996 Dodge DakotaV8-5.2LService typeFront Crankshaft Seal ReplacementEstimate$264.59Shop/Dealer Price$278.74 - $315.00
2000 Dodge DakotaL4-2.5LService typeFront Crankshaft Seal ReplacementEstimate$208.25Shop/Dealer Price$225.67 - $273.76
1999 Dodge DakotaV6-3.9LService typeFront Crankshaft Seal ReplacementEstimate$241.93Shop/Dealer Price$257.38 - $298.29
1997 Dodge DakotaL4-2.5LService typeFront Crankshaft Seal ReplacementEstimate$201.67Shop/Dealer Price$218.92 - $263.18
2002 Dodge DakotaL4-2.5LService typeFront Crankshaft Seal ReplacementEstimate$208.25Shop/Dealer Price$225.81 - $274.01
1999 Dodge DakotaL4-2.5LService typeFront Crankshaft Seal ReplacementEstimate$208.25Shop/Dealer Price$225.69 - $273.79
2002 Dodge DakotaV8-5.9LService typeFront Crankshaft Seal ReplacementEstimate$271.13Shop/Dealer Price$286.95 - $328.14
Show example Dodge Dakota Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(540)

Rating Summary
503
23
4
3
7
503
23
4
3
7

Damian

12 years of experience
430 reviews
Damian
12 years of experience
Dodge Dakota V6-3.7L - Exterior Door Handle Replacement (Driver Side Rear, Passenger Side Rear) - Orlando, Florida
Promptly completed repairs and cleared area of debris and defective parts.

Russell

28 years of experience
271 reviews
Russell
28 years of experience
Dodge Dakota V6-3.9L - Oil/Fluid Leak - San Leandro, California
He explained everything to me and showed me the things that needed to be done now and in the future. I am happy he is my mechanic!

David

26 years of experience
180 reviews
David
26 years of experience
Dodge Dakota V6-3.9L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Summerfield, Florida
David was on time, friendly, polite...he was confident in his ability to do the repairs needed...he was willing to show me everything he was doing so I was aware. I am happy that I have found my new mechanic for all of my vehicle needs.

Melvin

15 years of experience
158 reviews
Melvin
15 years of experience
Dodge Dakota V6-3.9L - Brakes, Steering and Suspension Inspection - Rural Hall, North Carolina
Melvin is a great mechanic and true professional. He communicated well before the appointment to get more information on the issue. He arrived on time, and was courteous and knowledgeable. During the entire process, Melvin explained what he was doing and I did not get the feeling that he was ever trying to up sell any maintenance and was looking out for my best interest as a client. I highly recommend Melvin to anyone. I wish all mechanics were like this.

Excellent Rating

(540)

Rating Summary
503
23
4
3
7
503
23
4
3
7
Number of Dodge Dakota services completed
5940+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Keep Your Car Running Well in Cold Weather
Cold weather affects how a car performs. Get snow tires, check your car battery, wash and wax your car, and check car fluids to help winter driving.
A Buyer’s Guide to the 2012 Infiniti EX
If If you’re in search of sport meets practicality, the EX may just be your perfect match. With the sedan-like driving of its G37 sibling combined with utility functionality and plenty of power under the hood, this is one SUV...
P0668 OBD-II Trouble Code: PCM/ECM/TCM Internal Temperature Sensor Circuit Low
P0668 means there is a problematic temperature reading from the engine or transmission. This could be due to a faulty sensor or wire, or overheating.

The carpets in my Saturn Vue are always soaked, and I can't find any leaks

This is a common sign of a leaking heater core. The [heater core]((https://www.yourmechanic.com/services/heater-is-not-working-inspection) is a small radiator like unit that circulates the hot coolant from the engine through the heater core which then uses this warm coolant to heat the...

Steering issues

The spring is compressed between the spring seat on the strut and a top cap that is held on by the strut retaining nut. When you turn the wheel the spring will move as the strut itself moves. So, movement...

Steering wheel groans/sputters on turns

Hello, thank you for writing in. The previous tech who examined the vehicle may be correct, but it is impossible to verify that without the vehicle in front of us. The steering column can cause these symptoms, but so can...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com