Dodge Dakota Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(540)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(540)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Dodge Dakota Control Arm Assembly Replacement is $154 with $14 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Dodge DakotaV8-4.7LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$480.24Shop/Dealer Price$554.61 - $767.17
2003 Dodge DakotaV8-4.7LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$871.99Shop/Dealer Price$999.87 - $1372.76
2001 Dodge DakotaV8-5.9LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$427.49Shop/Dealer Price$482.40 - $640.87
2002 Dodge DakotaV8-4.7LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$442.08Shop/Dealer Price$497.18 - $655.79
1997 Dodge DakotaL4-2.5LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$711.41Shop/Dealer Price$839.51 - $1212.57
1992 Dodge DakotaL4-2.5LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$848.73Shop/Dealer Price$1009.16 - $1483.71
1991 Dodge DakotaL4-2.5LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$220.29Shop/Dealer Price$240.74 - $297.87
1996 Dodge DakotaV6-3.9LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$1023.91Shop/Dealer Price$1186.36 - $1662.43
Show example Dodge Dakota Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(540)

Rating Summary
503
23
4
3
7
503
23
4
3
7

John

33 years of experience
1126 reviews
John
33 years of experience
Dodge Dakota V6-3.9L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Alvin, Texas
Great job as usual. Truck is running smoothly.

Tim

13 years of experience
101 reviews
Tim
13 years of experience
Dodge Dakota V6-3.7L - Valve Cover Gasket - San Antonio, Texas
Tim was very professional and knowledgeable not to mention punctual. When answering questions, he was courteous and honest. He also gave an estimated time of completion and came pretty close to that time. I definitely recommend Tim and we will be requesting his expertise in the future.

Bobby

28 years of experience
88 reviews
Bobby
28 years of experience
Dodge Dakota V6-3.9L - Oil/Fluid Leak - Charlotte, North Carolina
Gave good advice.

Gustavo

21 years of experience
75 reviews
Gustavo
21 years of experience
Dodge Dakota V8-4.7L - Valve Cover Gasket - San Antonio, Texas
Gustavo is a very polite and professional mechanic. He did a great job on my truck, even though it was hot and humid, with all of the age issues it has. I know I would be happy to have him work on my truck the next time I need something done.

Excellent Rating

(540)

Rating Summary
503
23
4
3
7
503
23
4
3
7
Number of Dodge Dakota services completed
5940+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Clean Your Catalytic Converter
Before looking into a catalytic converter cleaner, check it for clogging, internal part damage, and poor fuel economy.
All About All-Season Tires
Depending Depending on the climate you live in, season changes can be slight or they can be extreme. Some areas of the United States have very temperate climates with a rainy season and a hot season. Others have a short,...
Child Seat Safety Laws in Colorado
In In Colorado, as in other states, seat belt laws are in place to protect the occupants of motor vehicles. When those occupants are too young to protect themselves, then the duty falls to adults. Colorado is a bit different...

How much to flush out system cause car has no heat

The heater core being plugged is not the most common cause for this vehicle to not give heat out of the vents. If you move controls to heat and do not notice a temperature change when turned hotter the most...

Snapped bolt on front drive shaft. What is name of part? How mych does it cost? Is it hard to replace?

The inner end of the drive shaft on this vehicle is held within the transmission by a spring steel snap ring. The wheel bearing end of the axle is held on by the axle retaining nut. The wheel bearing hub...

Coolant is hot

The radiator and radiator reserve tank will heat up as the engine reaches normal operating temperature. If the temperature gauge on the instrument panel shows that the engine operating temperature is in the range of about 190 degrees to 220...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com