Dodge Charger Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(776)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(776)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Dodge Charger Power Steering Pressure Hose Replacement is $221 with $81 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Dodge ChargerV8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$316.20Shop/Dealer Price$360.10 - $483.70
2009 Dodge ChargerV8-6.1LService typePower Steering Pressure Hose ReplacementEstimate$307.19Shop/Dealer Price$349.32 - $471.60
2012 Dodge ChargerV8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$684.45Shop/Dealer Price$820.92 - $1226.16
2018 Dodge ChargerV8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$684.45Shop/Dealer Price$820.92 - $1226.16
2011 Dodge ChargerV8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$524.75Shop/Dealer Price$622.77 - $909.34
2015 Dodge ChargerV6-3.6LService typePower Steering Pressure Hose ReplacementEstimate$684.45Shop/Dealer Price$821.06 - $1226.41
2009 Dodge ChargerV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$618.95Shop/Dealer Price$739.06 - $1095.19
2010 Dodge ChargerV8-6.1LService typePower Steering Pressure Hose ReplacementEstimate$307.19Shop/Dealer Price$349.35 - $471.64
Show example Dodge Charger Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(776)

Rating Summary
728
24
5
5
14
728
24
5
5
14

Roberto

12 years of experience
6 reviews
Roberto
12 years of experience
Charger 2014 - Thermostat Housing - Loganville, GA
Roberto was professional and did a great job. Thanks for the service.

Gregory

10 years of experience
25 reviews
Gregory
10 years of experience
Charger 2012 - Clunking or knocking noise from wheels - Fresno, CA
Best experience ever! So happy with the service! Mechanic was awesome very trustworthy! Will call again!

Adrian

11 years of experience
26 reviews
Adrian
11 years of experience
Charger 2012 - Oil Pressure Sensor - Stone Mountain, GA
A1 mechanic

Giovanni

0 years of experience
7 reviews
Giovanni
0 years of experience
Charger 2008 - Camshaft Position Sensor - Opa-locka, FL
Giovanni was professional, knowledgeable and went that extra mile to see if he could get me on the road today. Made observations of what was needed to get my vehicle serviced. i would like to have him come back and help m

Excellent Rating

(776)

Rating Summary
728
24
5
5
14
728
24
5
5
14
Number of Dodge Charger services completed
8536+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

Ignition Coil Replacement - Step-by-Step Guide
Find everything you need to know about replacing an ignition coil in this guide. Learn to do an ignition coil replacement yourself with YourMechanic.
P0295 OBD-II Trouble Code: Cylinder 12 Injector Circuit High
P0295 P0295 Code Definition Cylinder 12 Injector Circuit High What the P0295 code means The P0295 trouble code means that the Engine Control Module (ECM) detects resistance in the cylinder 12 fuel injector circuit as falling outside the normal range...
P0041 OBD-II Trouble Code: O2 Sensor Signals Swapped Bank 1 Sensor 2/ Bank 2 Sensor 2
P0041 P0041 code definition P0041 tells us the ECU has detected swapped sensor signals for oxygen sensor 2 between banks 1 and 2. This code may be associated with P0040. What the P0041 code means P0041 means that the engine...

The air and heat are acting up. When I turn the car on it makes a bubbling sound.

Hello. It sounds like you have a few different things going on here. They may or may not be related. If they all occurred at the same time, then it may be a bad electrical connection. Most of the time...

My '98 expedition, it drives fine for a while, then after a few hours, when sitting still, it idles rough then shuts off.

After some testing done to verify the EGR valve flow to see if the valve is intermittently sticking open causing the stall. This can be done using a scanner with the capability to open and close the EGR valve and...

Car died while driving and cranks but wont turn over. Had a check engine light on for P0030. Insight on why it wont start?

When you say the car cranks "lightly" it makes me wonder if you've had a timing belt break. The timing belt is supposed to be changed at around 90,000 miles, and if that is not done, the belt could fail,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com