Dodge B350 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(17)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(17)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Dodge B350 Wheel Bearings Replacement is $154 with $14 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Dodge B350V8-5.2LService typeWheel Bearings - Driver Side Front ReplacementEstimate$242.26Shop/Dealer Price$257.13 - $291.21
1994 Dodge B350V8-5.9LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$223.53Shop/Dealer Price$234.35 - $261.44
1992 Dodge B350V8-5.9LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$289.01Shop/Dealer Price$309.30 - $363.91
1992 Dodge B350V8-5.9LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$289.01Shop/Dealer Price$309.30 - $363.90
1990 Dodge B350V8-5.2LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$272.43Shop/Dealer Price$290.78 - $334.61
1991 Dodge B350V8-5.9LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$272.43Shop/Dealer Price$288.78 - $331.11
1992 Dodge B350V8-5.2LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$289.01Shop/Dealer Price$309.32 - $363.94
1990 Dodge B350V8-5.2LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$272.43Shop/Dealer Price$288.57 - $330.74
Show example Dodge B350 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(17)

Rating Summary
16
0
1
0
0
16
0
1
0
0

Chris

17 years of experience
419 reviews
Chris
17 years of experience
Dodge B350 V8-5.9L - Starter - South San Francisco, California
Chris did an excellent job. Showed up on time, with the proper parts and did a great job.

Brian

24 years of experience
818 reviews
Brian
24 years of experience
Dodge B350 V8-5.9L - Car is not starting - Jacksonville, Florida
Brian was over an hour late to my appointment.

Terry

32 years of experience
99 reviews
Terry
32 years of experience
Dodge B350 V8-5.9L - Shock Absorber Replacement (Front) - Arlington, Texas
Exceeded my expectations. Will use for future needs and recommed others do the same.

Chris

27 years of experience
126 reviews
Chris
27 years of experience
Dodge B350 V8-5.9L - Serpentine/Drive Belt Replacement - Citrus Heights, California
Chris is amazing! Punctual, personable, professional. When the repair turned out to be more extensive than I had thought when I booked, he went out of his way to get the additional part needed quickly. Rarely, if ever, have I ever felt so taken care of in the course of getting a repair.

Excellent Rating

(17)

Rating Summary
16
0
1
0
0
16
0
1
0
0
Number of Dodge B350 services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Get Sap Off a Car
Tree sap on your car can be hard to remove. Hand wash your car, then try car tree sap remover or rubbing alcohol to get tree sap off your paint.
How to Tell If an Oil Filter Is Good Quality
The The engine and hydraulic systems of your car are expensive pieces of equipment that you must protect with a high quality oil filter. The oil filter performs many functions to help prolong the life of your engine. It cleans...
How Long Does a Parking Brake Drum Last?
Your Your car has two braking systems – one is activated when you press the brake pedal. The other is activated when you engage the parking brake by either pulling up the lever beside the driver seat or pressing the...

Check engine light on, error code P0300, P0302, P0171,

Hi there. Why are you going to replace the O2 sensor? Did testing reveal a problem with the sensor itself? It sounds like there could be an air leak concern or an airflow meter concern. Has anyone checked for cracked,...

Car is grinding after driving a distance but nothing wrong with brakes ?

Hi there. It sounds like it could either axle or wheel bearing related. Low lubricant in either of these can create what your experiencing once heated up during use. A visual inspection of the axle boots may help in identifying...

over the last 2 months I started hearing this knocking noise that has gotten louder and my steering wheel kinda shakes.

A real shop would perform a 75 point inspection (https://www.yourmechanic.com/services/75-point-safety-inspection) while the car is in their care. If they see that you need tires and struts on the second approach, then they are not a real shop. The noise that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com