Chrysler PT Cruiser Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Chrysler PT Cruiser Valve Cover Gasket Replacement is $276 with $66 for parts and $210 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Chrysler PT CruiserL4-2.4LService typeValve Cover Gasket ReplacementEstimate$364.72Shop/Dealer Price$403.18 - $506.39
2010 Chrysler PT CruiserL4-2.4LService typeValve Cover Gasket ReplacementEstimate$372.07Shop/Dealer Price$413.09 - $529.96
2002 Chrysler PT CruiserL4-2.4LService typeValve Cover Gasket ReplacementEstimate$372.07Shop/Dealer Price$413.12 - $530.03
2008 Chrysler PT CruiserL4-2.4LService typeValve Cover Gasket ReplacementEstimate$351.21Shop/Dealer Price$387.05 - $488.30
2004 Chrysler PT CruiserL4-2.4LService typeValve Cover Gasket ReplacementEstimate$372.07Shop/Dealer Price$415.33 - $533.89
2003 Chrysler PT CruiserL4-2.4L TurboService typeValve Cover Gasket ReplacementEstimate$351.21Shop/Dealer Price$387.26 - $488.67
2008 Chrysler PT CruiserL4-2.4L TurboService typeValve Cover Gasket ReplacementEstimate$351.21Shop/Dealer Price$387.07 - $488.34
2005 Chrysler PT CruiserL4-2.4L TurboService typeValve Cover Gasket ReplacementEstimate$351.21Shop/Dealer Price$387.05 - $488.30
Show example Chrysler PT Cruiser Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(18)

Rating Summary
17
1
0
0
0
17
1
0
0
0

Rusty

0 years of experience
532 reviews
Rusty
0 years of experience
PT Cruiser 2009 - Valve Cover Gasket - Arlington, TX
excellent service and communication very prompt and professional

Nathan

13 years of experience
12 reviews
Nathan
13 years of experience
PT Cruiser 2005 - Coolant is leaking - Eugene, OR
Nathan was very helpful and did a great job explaining what he found while working on my car. He's been in the auto repair industry for ten years, so he has both sound judgement and expertise.

Pedro

7 years of experience
26 reviews
Pedro
7 years of experience
PT Cruiser 2003 - Battery - Bakersfield, CA
Pedro was pleasant and easy to communicate with, arrived promptly and got to work immediately.

Alexander

5 years of experience
126 reviews
Alexander
5 years of experience
PT Cruiser 2007 - Car is not starting - Gahanna, OH
Real friendly, on time, performed work even under adverse weather, and very professional.

Excellent Rating

(18)

Rating Summary
17
1
0
0
0
17
1
0
0
0
Number of Chrysler PT Cruiser Valve Cover Gasket Replacement services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Get a Smog Check
Smog checks are designed to help lower the emissions created by vehicles. The word “smog” refers to smoke and fog air pollution, which is created in large part by emissions from cars. While smog checks aren’t mandatory everywhere in the...
How to Replace Your Power Antenna
Car Car antennas are unfortunately open to the elements when driving, and as a result, are likely to get damaged at some point in time. To prevent this damage, manufacturers started using retractable antennas that will hide away when not...
5 Essential Things to Know About Electric Vehicles
Electric Electric cars seem to be popping up everywhere these days, but many don’t necessarily understand how they work. If you’re trying to decide if an electric vehicle is the right option for you, there are a few key things...

What does the low fuel Warning Light mean in a 2012 Chevrolet Cruze?

The low fuel Warning Light is located on the instrument cluster. When your vehicle is almost out of fuel, the low fuel Warning Light will illuminate. When you add more fuel to the car, the warning light will disappear. Tip...

Fluctuating transmission temp gauge

The most likely cause of this issue would be a faulty transmission temperature sensor. I would recommend having your transmission temperature sensor inspected and tested for proper function by a qualified professional. If the transmission temperature sensor is functioning improperly,...

Hey so we had a bit of snow last week and I’m pretty sure my battery is dead. I tried jumping it with a kit, but nothing turns on at all, not even power locks work, do I need to replace the battery? It’s also a push start so I imagine the button isn’t doing anything to try to turn the engine?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com