Chrysler LeBaron Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Chrysler LeBaron Headlight Bulb Replacement is $155 with $15 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Chrysler LeBaronL4-2.5L TurboService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$184.44Shop/Dealer Price$195.40 - $220.18
1990 Chrysler LeBaronL4-2.2L TurboService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$175.43Shop/Dealer Price$184.62 - $208.08
1990 Chrysler LeBaronL4-2.5L TurboService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$175.43Shop/Dealer Price$184.65 - $208.12
1994 Chrysler LeBaronV6-3.0LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$175.43Shop/Dealer Price$184.65 - $208.12
1991 Chrysler LeBaronL4-2.5L TurboService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$175.43Shop/Dealer Price$186.12 - $210.70
1993 Chrysler LeBaronV6-3.0LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$175.43Shop/Dealer Price$184.79 - $208.37
1994 Chrysler LeBaronL4-2.5LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$175.43Shop/Dealer Price$184.66 - $208.15
1992 Chrysler LeBaronL4-2.5LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$175.43Shop/Dealer Price$184.65 - $208.12
Show example Chrysler LeBaron Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(15)

Rating Summary
13
1
0
0
1
13
1
0
0
1

Kevo

313 years of experience
189 reviews
Kevo
313 years of experience
Chrysler LeBaron V6-3.0L - Car is not starting - Sacramento, California

Jason

24 years of experience
190 reviews
Jason
24 years of experience
Chrysler LeBaron V6-3.0L - Starter - Nashville, Tennessee
Great job

Ernest

14 years of experience
17 reviews
Ernest
14 years of experience
Chrysler LeBaron V6-3.0L - Starter - Winston Salem, North Carolina
fixed my car in a very timely manor. It's greatly appreciated

Shane

18 years of experience
379 reviews
Shane
18 years of experience
Chrysler LeBaron L4-2.2L - Car is not starting Inspection - Austin, Texas
Thorough and informational.

Excellent Rating

(15)

Rating Summary
13
1
0
0
1
13
1
0
0
1
Number of Chrysler LeBaron services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

Common Signs Your Drive Belt Needs Replacement
A car drive or serpentine belt keeps your engine running smoothly. Unusual noises from the engine and visible belt wear means it needs replacement.
How Long Does a Fog Light Relay Last?
All All vehicles come equipped with headlights, and some vehicles offer you more in terms of lighting. Fog lights are a popular option with drivers as they are perfect for foggy conditions obviously, as well as snow, rain, and any...
How to Renew Your Car Registration in Oklahoma
Having Having your car registered with the Oklahoma Tax Commission is an important part of driving legally in this state. You will need to do this within 30 days of moving to Oklahoma or you may have to pay a...

What Are California's Emissions Standards?

California emissions standards are the highest in the nation, and exceed the EPA’s regulations. You’ll find that many vehicles sold in different parts of the country are rated for California’s emissions standards because automakers are required to manufacture a certain...

Odd fuel trim pattern cycle causing rough running

Hello and thank you for contacting Your Mechanic. What seems to happening with your engine Bank 1 is going rich and Bank 2 is going lean and repeating itself. Now, for this to repeat itself, there is probably a problem...

Changing a coil pack

Hey there. The easiest way will be to use a pair of long needle nose pliers. These pliers can reach down into the spark plug hole and then grab onto the rubber boot and lift and twist at the same...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com