Chrysler Crossfire Spark Plug Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(99)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(99)

Spark Plug Replacement Service

How much does a Spark Plug Replacement cost?

On average, the cost for a Chrysler Crossfire Spark Plug Replacement is $680 with $288 for parts and $392 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Chrysler CrossfireV6-3.2LService typeSpark Plug ReplacementEstimate$1083.86Shop/Dealer Price$1256.41 - $1751.36
2005 Chrysler CrossfireV6-3.2L TurboService typeSpark Plug ReplacementEstimate$983.81Shop/Dealer Price$1132.71 - $1567.84
2005 Chrysler CrossfireV6-3.2LService typeSpark Plug ReplacementEstimate$1058.63Shop/Dealer Price$1226.30 - $1717.60
2006 Chrysler CrossfireV6-3.2L TurboService typeSpark Plug ReplacementEstimate$983.81Shop/Dealer Price$1132.77 - $1567.95
2007 Chrysler CrossfireV6-3.2LService typeSpark Plug ReplacementEstimate$1058.63Shop/Dealer Price$1230.42 - $1724.81
2008 Chrysler CrossfireV6-3.2LService typeSpark Plug ReplacementEstimate$1058.63Shop/Dealer Price$1226.69 - $1718.28
2004 Chrysler CrossfireV6-3.2LService typeSpark Plug ReplacementEstimate$1058.63Shop/Dealer Price$1226.34 - $1717.67
Show example Chrysler Crossfire Spark Plug Replacement prices

What are spark plugs and how do they work?

Spark plugs are one of the key components of your vehicle’s ignition system. They ignite gasoline and air inside of your engine. This gives your engine the power to propel you down the road. The spark plug takes high voltage electricity from the ignition coil and creates a spark at just right moment during the engine’s combustion cycle. This gives the engine the best mix of power, fuel economy and low emissions. However, the electrode at the end of the spark plug eventually wears out and can cause performance issues.

Spark plugs-MATROX-1

When should you replace spark plugs?

Replacement should follow the vehicle maintenance schedule. This will be listed in the vehicle’s owner’s manual. Some cars require regular replacement at 30k, 60k or 100k miles. It is possible in some cases that a spark plug might fail before the service schedule, but it’s not typically common.

Avoiding spark plug replacement can cause:

  • Difficulty starting your car.
  • Check engine light for a misfire code.
  • Flashing check engine light during acceleration for misfire, this can cause engine damage.
  • Reduced fuel economy and/or power.
  • Rough idle and/or unexplained engine vibration.
  • Failed State emission testing.

Even if only one spark plug is found to be faulty, they should always be replaced in sets. Most engines will require 4,6, or 8 spark plugs.

How do mechanics replace spark plugs?

Spark plugs are threaded into the engine’s cylinder head(s). Most cars have one plug per cylinder, so a four-cylinder engine will have four plugs, a six-cylinder engine will have six plugs, and so forth. The mechanic will:

  • Have the correct spark plugs on hand for your vehicle
  • Pull any diagnostic trouble codes that may be related to worn spark plugs.
  • Remove the original spark plugs and look at removed spark plugs for any clues indicating engine mis-operation exists; such as oil burning, excessively rich mixture, pre-ignition damage etc. Inform owner of any found unusual conditions.
  • Install new plugs using a torque wrench.
  • Finally, a road test of the vehicle to confirm normal operation.

Is it safe to drive with worn spark plugs?

Yes, but spark plugs that are worn enough to cause engine-misfiring have the potential to cause engine damage and overheating of the catalytic converter. Regardless of the age of the plugs, or mileage, if the engine misfires or runs poorly, the plugs should be inspected for defects. Generally, spark plug failure will not keep the engine from running, but in cases of extreme wear, you may experience a limitation in the speed at which you can drive the car. If the maintenance schedule says the plugs should be replaced, it is best to do so promptly.

When having spark plugs replaced keep in mind:

  • High-speed driving may accelerate spark plug wear. Consider earlier than required inspection and tune-up if you operate the car in severe conditions.
  • Plugs should always be promptly replaced per the manufacturer maintenance schedule even if they appear to be working perfectly.
  • If your vehicle is equipped with spark plug wires (as opposed to a coil-on-plug system), the wires should be replaced at the same time. This may increase the cost of your repair.
  • It is possible that when doing a spark plug replacement, your vehicle may also need additional parts like ignition coils, this will add to the repair cost.
  • Some engines require that the intake manifold be removed while replacing spark plugs. This may increase the parts and labor cost for the repair.
  • Leaking valve cover gaskets, which have let oil get in contact with the spark plugs, coils or wires, may be the cause of ignition system issues. Valve cover gaskets will need to be replaced in addition to the spark plugs, wires or coils. This will add to the repair cost.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(99)

Rating Summary
90
5
2
0
2
90
5
2
0
2

Robert

14 years of experience
65 reviews
Robert
14 years of experience
Crossfire 2006 - Car idle is rough - Phoenix, AZ
Robert was very professional, an absolute joy! Highly recommended!

Robert

14 years of experience
65 reviews
Robert
14 years of experience
Crossfire 2006 - Car is overheating - Phoenix, AZ
Robert was very professional, an absolute joy! Highly recommended!

Petar

5 years of experience
21 reviews
Petar
5 years of experience
Crossfire 2004 - Car is not starting - Mercer Island, WA
Petar is very efficient and good. he know cars and Im was very impressed with him

Rusty

0 years of experience
532 reviews
Rusty
0 years of experience
Crossfire 2007 - Power Steering Fluid Service - Mansfield, TX
Very happy with the service visit. I greatly appreciate the way that Rusty explains everything about the mechanical condition of my car and what he is doing to keep it running.

Excellent Rating

(99)

Rating Summary
90
5
2
0
2
90
5
2
0
2
Number of Chrysler Crossfire services completed
1089+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Land Rover Range Rover
The The 2012 Land Rover Range Rover offers everything you would expect from this carmaker. Acceleration is smooth, off-road handling is impressive and it has a rich interior that ensures comfort no matter where the road or trail takes you....
Why Is There a Tinted Strip on the Top of Some Windshields?
If If you’ve driven several vehicles, you’ve probably noticed that some vehicle windshields are equipped with a tinted strip on the windshield. The strip can either be blue that fades out as it gets lower, or it may be a...
How to Renew Your Car Registration in Washington
Like Like all other states, Washington requires vehicle owners to pay to have their car registered. Registration must be renewed each year. The money obtained from registration is used by the state to maintain the roads, to operate the public...

How do you install a child seat with a tether?

Your Accord is equipped with three anchor points above the back of the rear seat. You’ll need to remove the plastic covers to access the metal anchors, though. To install a child seat with a tether: Install the seat where...

my truck when I turn the key I have no power but when I jump it it starts up.

If you have a new, fully charged battery, and the starting system still does not function, there are actually only a relatively limited number of causes. Broadly, either the starter motor/solenoid assembly is faulty or the electrical circuit supplying the...

Idle drops when pushing the clutch IN

You should first have the computer scanned for any codes that may contribute to the problem like the idle control valve or mass air flow sensor. Check all the intake hoses for any cracks between the therottle body and the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com